• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.12
• /
• pp.1609-1614
• /
• 2008

To provide scientific information for processing of value-added products from onion, volatile flavor compounds were compared in onions harvested in 6 regions, such as Muan (Jeonnam), Buan (Jeonbuk), Andong (Gyeongbuk), and 3 regions of Gyeongnam around Changnyeong (Yueo, Jangma, Seongsan). A total of 51 compounds were detected in samples by solid phase microextraction (SPME)/GC/MSD and they consisted mainly of sulfur-containing compounds (20), aldehydes (4), ketones (5), esters (11), aromatic hydrocarbons (4), nitrogen containing compounds (2), and miscellaneous compounds (5). The sulfur-containing compounds were the major compounds with ranges of $62.6{\sim}80.3%$ of total volatiles, regardless of harvested regions. The amounts of 5 sulfur containing compounds known as having antioxidant activity (2,4-, 2,5-dimetylthiophene, 2-vinyl-1,3-dithiane, 5-methoxy thiazole, and 3,5-diethyl-1,2,4-trithiolane) were the highest in Andong and followed by Yueo, Jangma, Buan, Seongsan, and Muan. However, onions from Buan region had the highest amounts of 5 sulfur-containing compounds known as having anticarcinogenic activity ((Z)-, (E)-methyl propenyl disulfide, (Z)-, (E)-propenyl propyl disulfide, and di-2-propenyl disulfide), followed by Yueo, Andong, Jangma, Seongsan, and Muan.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.136-141
• /
• 2016

The production scale of mushrooms in Korea is approximately 600 billion won, which is 1.6% of Korea's gross agricultural output. In Korea, ca. 190,000 tons of mushrooms are harvested annually. Although the numbers of mushroom farms and cultivators are constantly decreasing, total mushroom yields are increasing owing to large-scale cultivation facilities and automation. The recent expansion of the well-being trend has caused an increase in mushroom consumption in Korea: the annual per capita mushroom was 3.9 kg ('13), whichis a little higher than that in Europe. Thus, mushroom export, mainly Flammulina velutipes and Pleurotus ostreatus, has increased since the mid-2000s. Recently, however, it is slightly reduced. Nevertheless, Vietnam, Hong Kong, the United States, and the Netherlands continue to export mushrooms, and Korea has increased its export to Australia, Canada, Southeast Asia, etc. Canned Agaricus bisporus, the first export of the Korean mushroom industry, reached it speak sales in 1977-1978. When Korea initiated trade with China in 1980, the international prices of mushrooms fell sharply, leading to shrinkage of the domestic markets. Spurred by the high demand to develop substitute goods for A. bisporus, the oyster mushroom (P. ostreatus) gained attention since it seemed to suit the taste of Korean consumers. Although the log cultivation technique for oyster mushroom was developed in the early 1970s, it required a great deal of labor. Thus, we developed the shelf cultivation technique, which is easier to manage and allows for mass production. In this technique, the growing shelf is made mafrom fermented rice straw, whichis the only P. ostreatus medium in the world and isused only in South Korea. After then, the use of cotton wastes as an additional material of medium, the productivity. Currently, we are developing a standard cultivation technique and environmental control system that can stably produce mushrooms throughout the year. The increase of oyster mushroom production may boostthe domestic market and contribute to industrial development. In addition, oyster mushroom production technology played a role in forming the basis for the development of bottle cultivation, which made mass production. In particular, bottle cultivation using liquid spawn could allow for the export of F. velutipes and Pleurotus eryngii. In addition, the white varieties of F. velutipes were second developed in the world after Japan. We also developed the new A. bisporus cultivar 'Saeah', which is easy to grow in Korea. In hopes to advance the mushroom industry, we will continue to develop cultivars with international competitive power and to improve cultivation techniques.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.41-49
• /
• 1991

The reaction of molten urea with paraformaldehyde in sealed tubes has been examined, and the concentrations of the products obtained from this reaction have been contrasted to previous results from the identical reaction carried out in open beakers. In these studies, high performance liquid chromatography(HPLC) and nuclear magnetic resonance(NMR) spectroscopy were used to analyze the products formed in the reactions. These products were biuret, triuret, dimethylenetriurea, methylenediurea, and biuretmethyleneurea. The results from the HPLC analyses showed that the concentrations of dimethylenetriurea and methylenediurea in the reaction products increased as the amount of the paraformaldehyde starting material increased. However, the amount of biuret formed in the products decreased as the paraformaldehyde concentration was increased in the urea melt. The results from the NMR analyses showed that the $NH_2$ resonance frequencies for urea, methylenediurea, and dimethylenetriurea all occurred at approximately 5.6 ppm, while the $NH_2$ frequencies for biuret and triuret occurred at approximately 6.9ppm. In the case of biuret and triuret, NH protons absorb between 8.5 and 9.5 ppm, whereas the NH protons in methylenediurea and dimethylenetriurea absorb in the 6.5-6.6ppm region. The melt reaction seems to hold promise as a different technique for ureaform preparation in general.

• Journal of Bio-Environment Control
• /
• v.21 no.1
• /
• pp.1-11
• /
• 2012

The objective of the present study is to provide data needed to find double covering method to be able to improve environment of temperature, humidity and PPF in tomato greenhouse. The distribution charts of temperature, humidity and PPF which were measured in environment control conditions such as thermal insulation, air heating, roof ventilation and air fog cooling in conventional and air inflated double layers greenhouses were drawn and analysed. The thermal insulation effect of the air inflated greenhouse was the same as that of conventional greenhouse because the temperature between insulation curtain and roof covering material was equal in heating season. The ventilation effect of the air inflated greenhouse was superior to the conventional greenhouse. The temperature distribution in the fog cooled greenhouse was uniform and the cooling effect was about $3.5^{\circ}C$. The condensation on the roof covering surface could be controlled by removing the moisture between insulation curtain and roof covering by using humidifier. The PPF of conventional greenhouse was more decreased than the air inflated greenhouse as time went by because the transmittance of conventional greenhouse declined by dust collected on the inside plastic film owing to rolling up and down operation for ventilation.

• Journal of Animal Environmental Science
• /
• v.11 no.2
• /
• pp.135-146
• /
• 2005

This study was carried out to investigate the effect of Synechocystis sp. KACC 91007 when added to a pig slurry or pig liquid fertilizer (PLF) on germination index (GI) of Chinese cabbage. The preliminary experiment involved the screening of inoculant levels which were; 0.05, 0.1, 0.2, and $0.3\%$, respectively. The $0.05\%$ level of inoculant was selected based on low phytotoxicity and high GI.. The PLF underwent a 107 day aerobic and anoxic processing conditions. The T-N, T-P, $NH_4$, and $NO_3-N$ concentrations of the untreated pig slurry were; 2,873, 753, 1,441.6, and 16.48 ppm, respectively. Using aerobic processing treatment, the fertilizer value of the PLF was 3,672, 164, 183.87, and 21.97 ppm, respectively. In contrast, the fertilizer value of the PLF processed under anoxic condition was reduced to 1,261, 68, 161, and 16.87 ppm. The GI value of the untreated PLF under aerobic and anoxic processing condition was 83 and $40.4^{*}\%$, respectively. With the addition of the $0.05\%$ microbial inoculant, the GI improved by more than 40 and $50\%$ respectively, when the PLF was processed under anoxic and aerobic conditions. The above findings proved that the aerobic processing of PLF for 107 days was better than anoxic and yielded higher T-N which is a macro-nutrient fertilizer material. Consequently, the addition of $0.05\%$ microbial inoculant resulted to a higher GI of the Chinese cabbage specifically under aerobic processing condition.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.406-415
• /
• 2020

Maize (Zea mays L.) is one of the most valuable agricultural crops and is grown under a wide spectrum of environmental conditions. However, maize is moderately sensitive to salt stress, and soil salinity is a serious threat to its production worldwide. In this study, we used ethyl methane sulfonate (EMS) to generate salt-tolerant silage maize mutants. We screened salt-tolerant lines from 203 M₃ mutant populations by evaluating the morphological phenotype after salt stress treatment and selected the 140ES91 line. The 140ES91 mutant showed improved plant growth as well as higher proline content and leaf photosynthetic capacity compared with those of wild-type plants under salt stress conditions. Using whole-genome re-sequencing analysis, 1,103 single nucleotide polymorphisms and 71 insertions or deletions were identified as common variants between KS140 and 140ES91 in comparison with the reference genome B73. Furthermore, the expression patterns of three genes, which are involved in salt stress responses, were increased in the 140ES91 mutant under salt stress. Taken together, the mutant line identified in our study could be used as an improved breeding material for transferring salt tolerance traits in maize varieties.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.823-828
• /
• 2006

We established the optimal conditions for the hot water extraction of Camellia japonica compounds based on the yield, the stability (observed by peak changes on an HPLC chromatogram), and the 1,1-diphenyl-1-picrylhydrazyl radical-scavenging activity of the extracts. The extracts were prepared at $90^{\circ}C$ using six solution volumes (ranging from 100 mL to 600 mL), and four different extraction times (10, 30, 60, and 120 min). The results showed that increasing of the extraction volume elevated the radical-scavenging activity of the extracts; however, changes in volume had minimal affects on their yields and their stabilities. An increase in extraction time improved the compound yield; however, it reduced their stability and increased the deterioration of their radical-scavenging activity. Based on our results, we propose the following conditions to be optimal for the hot water extraction of dried C. japonica leaves: a water volume (mL) that is 60 times the weight (g) of the sample at a temperature of $90^{\circ}C$ for 30 min.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.443-452
• /
• 2006

The four rice(Oryza sativa L.) lines, previously demonstrated to have vigorous herbage production at the vegetative growth stage, were investigated for their growth traits, dry matter yield and feed value using the twice-cutting system that 1st-cut is harvested at panicle formation stage and 2nd-cut at the yellow ripen stage. The twice-cutting system is regarded as an effective method in the production of forage rice by escaping lodging and insect damages caused by the overgrowth and typhoon around the heading stage.The feed value of the twice-cut rice plant of there lines were compared with the control of normal, cutting at the yellow ripen stage. The relative feed value(RFV), the total digestible nutrient(TDN) and the crude protein(CP) content of the twice-cut straw were higher the control in every lines. However, the dry matter yield (DMY), represented by the summed forage production of 1st and 2nd cut-rice plant, were lower the control, and the DMY of straws were increase but grains were decrease for twice-cutting system. In addition, TDN yield showed the similar tendency with DMY.Recently, as one of the breeding aims the researches for improving the digestibility of rice straw have been required. In this regard, twice-cutting system is recognized with the fact that it has the effect which raises the digestibility of the straw. Especially, the 2nd cut of IR73111-B-R-15-3-1 line was similar to the control at the TDN yield of straw, and would be used as a breeding material for product the roughage of good quality.