• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.354-365
• /
• 1993

The purpose of this investigation is to point out the physical fixation and stability of banking slopes of forest roads by invasion of trees. We investigated the situations of sediment discharge and coverage of invaded trees at banking slopes of forest roads. The coverage of invaded trees were calculated from crown injection based on the stable slope and was compared with length of slope, slope gradient, and passage years after construction of forest road. 1. We investigated on the sediment discharge and the invasion of trees at banking slopes, which were actually observed 8 forest roads of Kyonggi-Do and Kangwon-Do. 2. There was no physical stability of the banking slope due to the surface erosion and slope failure, but the tree invasions were active at the stable plots. 3. The length of slope was constructed to 4.0m to 61.0m and recent forest road was mainly constructed to the slopes longer than 30m. There was strong regional effect between the length of slope and the coverage of invaded trees and the above two factors were inversely proportional to each other. 4. There was no significant relationship between the slope gradient and the coverage of invaded trees and the slope constructed within the angle of repose showed the relatively high coverage of invaded trees. 5. There was no significant relationship between the passage years and the coverage of invaded trees in the same investigative region after the construction of forest road. But there was a gradually increasing relationship of tree invasion between above two factors. However, there was some limitation to expect the invasion of the tree species. 6. In the light of the above results, we suggest that the construction of forest road may need foundation work and vegetation work simultaneously for the physical stability to make the environment of tree plantation and that the reasonable increase of construction cost of forest road may be prior to the other factors.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.10
• /
• pp.999-1005
• /
• 2008

The main reaction for soil washing with using sodium hydroxide(NaOH) and hydrogen peroxide(H$_2$O$_2$) was desorption and flotation of petrochemical contaminant by means of oxygen bubble. We found the rate of decomposition by rate constant according to various temperature. For the purpose of optimizing the operation factor, we examined the effect of concentration of NaOH and H$_2$O$_2$, washing time, and soil:water ratio. The rate of decomposition for H$_2$O$_2$ in liquid phase is the first order reaction by its concentration. The rate constant of k$_1$ was 0.9439 $\times$ exp(-1376.82/RT) when concentration of NaOH was lower than 0.1 M, and the rate constant of k$_2$ was 17.3588 $\times$ exp(-2320.06/RT) when it was higher than NaOH of 0.1 M. It found that NaOH was facilitated at the beyond of specific concentration. We confirmed the optimum concentration of NaOH/H$_2$O$_2$ by means of rate constants during soil washing. Also, the optimum conditions during soil washing were washing time of 15 min, soil : water ratio of 1 : 3, and NaOH/H$_2$O$_2$ concentration of 0.25 M/0.1 M.

• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.449-461
• /
• 2013

As the hydrofluoric acid leak in Gumi-si, Gyeongsangbuk-do or hydrochloric acid leak in Ulsan, Gyeongsangnam-do demonstrated, chemical related accidents are mostly caused by large amounts of volatile toxic substances leaking due to the damages of storage tank or pipe lines of transporter. Safety assessment is the most important concern because such toxic material accidents cause human and material damages to the environment and atmosphere of the surrounding area. Therefore, in this study, a hydrofluoric acid leaked from a storage tank was selected as the study example to simulate the leaked substance diffusing into the atmosphere and result analysis was performed through the numerical Analysis and diffusion simulation of ALOHA(Areal Location of Hazardous Atmospheres). the results of a qualitative evaluation of HAZOP (Hazard Operability)was looked at to find that the flange leak, operation delay due to leakage of the valve and the hose, and toxic gas leak were danger factors. Possibility of fire from temperature, pressure and corrosion, nitrogen supply overpressure and toxic leak from internal corrosion of tank or pipe joints were also found to be high. ALOHA resulting effects were a little different depending on the input data of Dense Gas Model, however, the wind direction and speed, rather than atmospheric stability, played bigger role. Higher wind speed affected the diffusion of contaminant. In term of the diffusion concentration, both liquid and gas leaks resulted in almost the same $LC_{50}$ and ALOHA AEGL-3(Acute Exposure Guidline Level) values. Each scenarios showed almost identical results in ALOHA model. Therefore, a buffer distance of toxic gas can be determined by comparing the numerical analysis and the diffusion concentration to the IDLH(Immediately Dangerous to Life and Health). Such study will help perform the risk assessment of toxic leak more efficiently and be utilized in establishing community emergency response system properly.

• The Korean Journal of Pesticide Science
• /
• v.14 no.1
• /
• pp.54-64
• /
• 2010

Effects of thirteen essential oils (anise oil, clove oil, marigold, mustard oil, neem oil, quassia, quilaja, rosemary oil, rotenone, tea tree extract, thyme oil, wintergreen oil, and yucca) and caffeine on typical industrial insect, silkworm (Bombyx mori) and two entomopathogenic nematodes, Steinernema carpocapsae GSN-1 strain (Sc) and Heterorhabditis sp. Gyeongsan strain (Hg) were investigated in the laboratory. When 1,000 ppm of each essential oils was treated, neem oil showed the highest insecticidal activity against silkworm. Mortality of silkworm fed on neem oil treated mulberry leaf was 55.3 and 100% 5 and 10 days after treatment, respectively. The silkworm fed on neem oil treated mulberry leaf did not make cocoon and pupa. Weight of cocoon and pupa was low in rotenone treatment showing 0.27 g and 1.01 g, respectively. Mustard oil had the highest nematicidal activity against entomopathogenic nematodes. 20 ppm of mustard oil resulted in 69.0% and 100% mortality of Sc and Hg 3 days after treatment, but 4% and 36% at 5 ppm in X-plate, respectively. Mortality of baited Galleria mellonella larva by Sc was not different from control at the concentration of 100 ppm of mustard oil while 30% lower in Hg in sand barrier. Mean numbers of established infective juveniles of Hg in Galleria larva were lower than Sc in sand barrier. Survival rate of Sc was similar to control at the concentration of <200 ppm of mustard oil in sand barrier.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.234-248
• /
• 1998

Seven box cores from the disposal areas located in the southern part of the East Sea (Stations Band B') and in the offshore to the east of Pusan (Stations J and J'), and from their surrounding areas (Stations J2, J6 and H) were collected to investigate the effect of dumped wastes on the foraminiferal assemblages. The species diversity indices [S, H(S), E] of foraminifera and the total number of foraminifera show significant differences between the ocean waste disposal areas and their adjacent areas. Ocean waste disposal areas located in southern part of the East Sea (Stations Band B') show not only smaller number of foraminifera species but also lower values of coarse fraction content in the sediment and the number of benthic and planktonic foraminifera than the surrounding areas. Another ocean disposal area located offshore Pusan (Station J') contains abnormally greater number of planktonic (approximately 300 000 individuals/lO g dried sediment) and benthic (approximately 300, 000 individuals/10 g dried sediment) foraminifera compared to those of the adjacent areas. The waste dumped at Station J' probably acts as a nutrient causing the greater number of foraminifera. Station J shows low species diversity indices [S, H(S)]. The number of benthic foraminifera decreases from the surface to the downcore at Station J, which indicates that Station J is under stress. However, Stations J', J2 and J6 are under stable conditions as evidenced by the greater species diversity indices [S, H(S)] compared to other stations. No foraminifera were found with biological disease or abnormal chambers, which commonly occur in extremely stressed environment, in both the ocean disposal and adjacent areas. The organic matter decay of the wastes dumped in the study areas has not made the bottom water corrosive.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.1
• /
• pp.1-15
• /
• 2015

Impacts of Sea Surface Temperature (SST) assimilation to the prediction of upper ocean temperature is investigated by using a regional ocean forecasting system, in which 3-dimensional optimal interpolation is applied. In the present study, Sea Surface Temperature and Sea Ice Analysis (OSTIA) dataset is adopted for the daily SST assimilation. This study mainly compares two experimental results with (Exp. DA) and without data assimilation (Exp. NoDA). When comparing both results with OSTIA SST data during Sept. 2011, Exp. NoDA shows Root Mean Square Error (RMSE) of about $1.5^{\circ}C$ at 24, 48, 72 forecast hour. On the other hand, Exp. DA yields the relatively lower RMSE of below $0.8^{\circ}C$ at all forecast hour. In particular, RMSE from Exp. DA reaches $0.57^{\circ}C$ at 24 forecast hour, indicating that the assimilation of daily SST (i.e., OSTIA) improves the performance in the early SST prediction. Furthermore, reduction ratio of RMSE in the Exp. DA reaches over 60% in the Yellow and East seas. In order to examine impacts in the shallow costal region, the SST measured by eight moored buoys around Korean peninsula is compared with both experiments. Exp. DA reveals reduction ratio of RMSE over 70% in all season except for summer, showing the contribution of OSTIA assimilation to the short-range prediction in the coastal region. In addition, the effect of SST assimilation in the upper ocean temperature is examined by the comparison with Argo data in the East Sea. The comparison shows that RMSE from Exp. DA is reduced by $1.5^{\circ}C$ up to 100 m depth in winter where vertical mixing is strong. Thus, SST assimilation is found to be efficient also in the upper ocean prediction. However, the temperature below the mixed layer in winter reveals larger difference in Exp. DA, implying that SST assimilation has still a limitation to the prediction of ocean interior.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.41-47
• /
• 2017

Considering that the X-ray apron used in the department of radiology is also used in the department of nuclear medicine, the study aimed to analyze the shielding rate of the apron according to types of radioisotopes, thus ${\gamma}$ ray energy, to investigate the protective effects. The radioisotopes used in the experiment were the top 5 nuclides in usage statistics $^{99m}Tc$, $^{18}F$, $^{131}I$, $^{123}I$, and $^{201}Tl$, and the aprons were lead equivalent 0.35 mmPb aprons currently under use in the department of nuclear medicine. As a result of experiments, average shielding rates of aprons were $^{99m}Tc$ 31.59%, $^{201}Tl$ 68.42%, and $^{123}I$ 76.63%. When using an apron, the shielding rate of $^{131}I$ actually resulted in average dose rate increase of 33.72%, and $^{18}F$ showed an average shielding rate of -0.315%, showing there was almost no shielding effect. As a result, the radioisotopes with higher shielding rate of apron was in the descending order of $^{123}I$, $^{201}Tl$, $^{99m}Tc$, $^{18}F$, $^{131}I$. Currently, aprons used in the nuclear medicine laboratory are general X-ray aprons, and it is thought that it is not appropriate for nuclear medicine environment that utilizes ${\gamma}$ rays. Therefore, development of nuclear medicine exclusive aprons suitable for the characteristics of radioisotopes is required in consideration of effective radiation protection and work efficiency of radiation workers.

• Journal of Life Science
• /
• v.19 no.12
• /
• pp.1737-1742
• /
• 2009

It has been known that Linum usitatissimum and Perilla frutescens are dietary sources of possible chemopreventive compounds such as lignans and $\alpha$-linolenic acid. Here, we investigated and compared the inhibitory effects of methanol extracts from Linum usitatissimum and Perilla frutescens on mutagenicity using the Ames test, and growth of human cancer cells (AGS human gastric adenocarcinoma, HT-29 human colon cancer, Hep 3B hepatocellular carcinoma cells). In the Ames test system using Salmonella typhimurium TA100, aflatoxin $B_1$ ($AFB_1$)-induced mutagenicity was significantly inhibited by treatment with the methanol extract from either Linum usitatissimum or Perilla frutescens (p<0.05) in a dose dependent manner. As for N-methyl-N'-nitro-N-nitrosoguamidine (MNNG)-induced mutagenicity, the methanol extracts (5 mg/assay) from Linum usitatissimum and Perilla frutescens showed 63% and 78% inhibitory rates, respectively, indicating that Perilla frutescens possessed stronger antimutagenic activity than did Linum usitatissimum. Inhibitory effects of methanol extracts from Linum usitatissimum and Perilla frutescens on the growth of human cancer cells (AGS, HT-29 and Hep 3B) appeared to increase dose dependently, and the inhibition was more effective against AGS and HT-29 compared to Hep 3B cells. Our results suggested that the methanol extract from Perilla frutescens showed stronger antimutagenic activity than that from Linum usitatissimumas assayed by the Ames mutagenic test, whereas the methanol extract from Linum usitatissimum was more effective than its counterpart for growth inhibition of human cancer cells. It is concluded that intake of Linum usitatissimum and Perilla frutescens as sources of omega-3 fatty acids will be beneficial for preventing cancer.

• Journal of Life Science
• /
• v.30 no.2
• /
• pp.156-161
• /
• 2020

Since industrialization, the production and utilization of various chemicals has contributed to improving the quality of our lives, but the subsequent discharge of massive waste is inevitable, and environmental pollution is becoming more serious every day. Exposure to chemicals as a result of environmental pollution is having a negative effect on human health and the ecosystem, and cleaning up the polluted environment that can affect our lives is a very important issue. Toxic aromatic compounds have been detected frequently in soil, groundwater, and wastewater because of the extensive use of oil products, and phenol, which is used to produce synthetic resins, textiles, and dyes, is one of the major pollutants, along with insecticides and preservatives. Phenol can cause dyspnea, headache, vomiting, mutation, and carcinogenesis. Phenol-degrading bacterium DWB-1-8 was isolated from the activated sludge of textile wastewater; this strain was identified as Comamonas testosteroni by 16S rRNA gene sequencing. The optimal culture conditions for the cell growth and degradation of phenol were 0.7% K₂HPO₄, 0.6% NaH₂PO₄, 0.1% NH₄NO₃, 0.015% MgSO₄·7H₂O, 0.001% FeSO₄·7H₂O, an initial pH of 7, and a temperature of 30℃. The strain was also able to grow by using other toxic compounds, such as benzene, toluene, or xylene (BTX), as the sole source of carbon.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.1
• /
• pp.15-21
• /
• 2013

This study investigated the oxidative stability of oils when dough was fried under a lower pressure than the ambient atmosphere. The pressure during the frying process was controlled at measures of 760, 560, 360 or 160 mmHg. The oil containing the dough was heated at $180^{\circ}C$ for 48 hours. Rancidity values, including acid value, peroxide value, fatty acid analysis, color changes, and browning of oil samples, were measured every 8 hours. As the frying process continued at all 4 pressure levels, the acid values (AV) increased. However, compared to the other pressure levels, the increase in AV was the least at 160 mmHg. In addition, the peroxide value at 160 mmHg was only 0.81 meq/kg compared to 1.52 meq/kg at 760 mmHg. For all pressure levels, stearic acid, oleic acid, ${\omega}$-6 linolenic acid were increased, while linoleic acid and ${\omega}$-3 linolenic acid were decreased. In terms of color, a-values representing redness were decreased, whereas b-values were increased as the frying proceeded. These results revealed that the oxidation of frying oil was decreased under reduced pressure condition. Thus, the usage of frying oil may be extended, owing to less oxidative concerns. This leads to a lower cost to the manufacturer, and furthermore, helps the environment by reducing industrial wastes.