• Corrosion Science and Technology
• /
• 제20권5호
• /
• pp.315-323
• /
• 2021

In this study, we examined corrosion behaviors of two types of Pb alloys for a lead acid battery comparatively. One containing 6.6 wt% Sn, 36 mg/kg Bi, and 612.4 mg/kg Ca was prepared by twin-roll continuous casting. The other containing 5.2 wt% Sn, 30.5 mg/kg Ag, and 557 mg/kg Ca was made by twin-belt continuous casting. Potentiodynamic polarization tests were performed to evaluate corrosion resistance. Cyclic voltammetry was done to examine oxidation and reduction reactions occurring on the surface of each alloy in 4.8 M H₂SO₄ solution. Electrochemical test results implied that the Pb alloy prepared with the twin-belt casting method was less stable than that cast with the twin-roll method. Such results might be due to precipitations formed during the casting process. Rolling did not appear to affect the corrosion behavior of the twin-roll samples with Ag < 10 mg/kg, while it reduced the anodic reaction of Ag on the surface of the twin-belt sample with 30.5 mg/kg Ag.

• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.106-111
• /
• 2012

본 연구에서는, 건축 외장재로 많이 사용되고 있는 외단열시스템에 대해 방염 효과를 확인하기 위하여 콘칼로리미터 실험을 적용하였다. 실험 결과, 방염제의 도포 형태나 농도에 따라 초기 착화 시점을 지연하는데 효과가 있었으나, 외벽 수직화재 발생 시 외단열시스템의 방염처리는 화재에 영향을 미치지 못할 것이라는 것을 확인하였다. 또한, 외단열시스템에 사용하는 고밀도와 저밀도 스티로폼의 밀도차에 의한 화재에 미치는 영향은 차이가 없음을 확인하였다. 실험 시 외장재의 착화는 40초 전후로 발생하였으며, 방출열량도 100초 이내에 약 90 %가 발생하는 것으로 나타나 다른 외벽재료와 비교하여 초기 화재 확산이 매우 빠름을 알 수 있었다. 외단열시스템 외장재 화재로 인한 화재 확산을 방지하기 위해서는 법적으로 외단열시스템의 적용 시 건물의 용도별로 사용을 제한하거나 화염전파를 차단할 수 있는 수직외벽 구획 등의 대책이 시급히 요구된다.

• 한국건축시공학회지
• /
• 제10권5호
• /
• pp.21-29
• /
• 2010

희생양극방식은 지하구조물이나 해양환경하에서 구조물의 방식공법으로 소개되어지고 있다. 1970년대 이후, 희생양극방식이 철근콘크리트 구조물에 적용되어지고 있다. 희생양극방식은 전세계적으로 1990년대 이후 그 유효성을 검증되었다. 그러나, 희생양극방식은 시공적이나 경제적인 약간의 문제점을 가지고 있다. 그 문제점을 해결하기 위하여 고 내구성 금속을 용사시키는 희생양극방식이 개발되었다. 양극재(아연, 알루미늄)를 금속용사로 도포하여 실험체를 제작한 후, 실험체의 부식전류를 측정하여 양극재의 방식성능을 확인하였다. 실험결과 철근 콘크리트 구조물을 대상으로 금속용사를 이용한 희생양극방식이 우수한 방식성능을 가지는 것을 알 수 있었다.

• 한국건축시공학회지
• /
• 제18권2호
• /
• pp.109-115
• /
• 2018

본 연구에서는 시멘트 생산에 의한 $CO_2$ 배출과 이로 인한 환경 부하를 감소시키기 위해 산업부산물인 고로슬래그 미분말을 활용하여 기존 SCW 공법에 사용되던 시멘트주입재를 친환경 무기결합재로 대체하여 모르타르를 제작하고 친환경 밀크주입재로써 적용이 가능한지를 파악하였다. 본 연구 결과 포틀랜드 시멘트를 사용하지 않은 비소성 시멘트를 이용한 NSB 경화체가 보통 포틀랜드 시멘트 경화체와 비교해 내산성, 내해수성, 압축강도 등이 우수한 것으로 나타나고 있다. 따라서 본 연구를 통해 만들어진 친환경 무기결합재 모르타르는 높은 내구성, 내화학성을 요구하는 SCW 공법과 같은 흙막이벽, 해양하부구조물 등의 지반재료용 결합재에 적용이 가능하다는 것을 알 수 있었다.

• 한국표면공학회지
• /
• 제54권3호
• /
• pp.102-111
• /
• 2021

The corrosion behaviors of laser-welded super duplex stainless steel tubes with post-weld heat treatment(PWHT) conditions(950, 1000, 1050, 1100 ℃ for 5 and 30 min) were evaluated by electrochemical potentiodynamic polarization and critical pitting temperature measurements. This study showed that the critical metallurgical factors affecting the degradation of corrosion resistance of a steel tube in as-welded condition were the unbalanced phase fraction(ferrite:austenite = 94:4), Cr₂N precipitation, and phase transformation from the austenite phase to ɛ-martensite(via stress-induced phase transformation). The improvement in the corrosion resistance of the welded specimen depends greatly on the PWHT conditions. The specimens after PWHT conducted below 1000 ℃ showed inferior corrosion resistance, caused by precipitation of the sigma phase enriched with Cr and Mo. At 1100 ℃ for a longer duration in PWHT, the ferrite phase grows, and its fraction increases, leading to an unbalanced phase fraction in the microstructure. As a result, pitting can be initiated primarily at the interface between the ferrite/austenite phase, particularly in base metal.

• 분석과학
• /
• 제36권5호
• /
• pp.216-223
• /
• 2023

Aluminium (Al) is one of the major elements in rocks and its concentration can be varied, depending on different rock types as well as sources. The present study aimed to propose an analytical method based on the UV-Vis as a cheap, simple, and common instrument equipped in most laboratories for Al quantification in rocks after the microwave assisted acid digestion. The aluminone and 8-hydroxyquinoline were investigated for the colorimetric assay. The results show that the 8-hydroxyquinoline reagent was more favorable in terms of the minimized affects of the potential interferences present in the digested solutions, i.e., Fe³⁺, Si⁴⁺ and F^-. The calibration curve was constructed from 0.10 mg/L to 3.00 mg/L with the goodness of linearity (R² = 0.9996). The limits of detection and quantification (LOD and LOQ) were estimated, i.e., 0.029 mg/L and 0.087 mg/L, respectively. The 8-hydroxyquinoline was applied to real rock samples, demonstrating favorable precision (RSD = 0.34 %-1.8 %) and no remarkable differences were found compared to the inductively coupled plasma-mass spectrometry (ICP-MS) as a reference measurement approach.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.473-480
• /
• 2009

In order to provide the mechanism of nozzle clogging, recovered nozzles for high strength steel grade were examined carefully after continuous casting. The thickness of clogged material in SEN is increased in the following order: from the bottom to the top of the nozzle, upper part of slag line, and the pouring hole. Nozzle clogging material begins to form due the adhesion of metal to nozzle wall, the decarburization, and reduction of oxide in the refractory by Al and Ti in the melt. The reduction of oxide in the refractory by Al and Ti improves the wettability of the melt on the refractory and forms a thin Al-Ti-O layer. Metal containing micro alumina inclusions is solidified on the Al-Ti-O layer, and the solid layer grows due to the heat evolution through the nozzle wall. Thermodynamic calculation has been made for the related reactions. The effect of superheat to the nozzle clogging is discussed on ultra low carbon steel and low carbon steel.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.133-138
• /
• 2002

Microbiologically Influenced Corrosion (MIC) was suspected in a corrosion failure of cooling system of stainless piping welded joint, carrying marine water. Marine water which is used for cooling water in a plant was transferred to the laboratory and used for experiment. In the first experiment, weld metal samples were exposed to the test solution for 56 days (marine water and sterilized marine water (control)). Surface condition of experimental coupons was observed using a Scanning Electron Microscope (SEM). In another experiment, free corrosion potential of these material was monitored for 56 days. Pitting corrosion was found in the coupons exposed to marine water. Free corrosion potential ennoblement was found to be significant compared to control. It was suspected that this corrosion case was MIC. In the second experiment, coupons were exposed to diluted nutrient medium containing single culture of microbes isolated from the MIC causing marine water sample used for the first experiment. After exposure test, surface condition of experimental coupon was observed using SEM. Pitting corrosion was found in coupons exposed to some of the isolates. The results indicate that they contribute to the corrosive effect of the SUS316L welds.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2377-2397
• /
• 2020

Human activity recognition is widely used in smart homes, health care and indoor monitor. Traditional approaches all need hardware installation or wearable sensors, which incurs additional costs and imposes many restrictions on usage. Therefore, this paper presents a novel device-free activities recognition system based on the advanced wireless technologies. The fine-grained information channel state information (CSI) in the wireless channel is employed as the indicator of human activities. To improve accuracy, both amplitude and phase information of CSI are extracted and shaped into feature vectors for activities recognition. In addition, we discuss the classification accuracy of different features and select the most stable features for feature matrix. Our experimental evaluation in two laboratories of different size demonstrates that the proposed scheme can achieve an average accuracy over 95% and 90% in different scenarios.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.119-127
• /
• 2008

In this paper, the influence of the stamping effect is investigated in the performance analysis of a side structure. The analysis covers the performance evaluation such as the crashworthiness and NVH. Stamping analyses are carried out for the center pillar and the side sill made of high strength steels. Then, numerical simulations are carried out in order to identify the stamping effect on the crashworthiness, the natural frequency and the normal mode. The result shows that the analysis of the side structure considering the forming history leads to a different result from that without considering the forming effect. The variation of the system response fully reveals effects of thinning and hardening of members on the performance prediction of vehicle parts. The analysis results demonstrate that the design of auto-body members should be carried out considering the stamping history for accurate assessment of various performances.