• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.169-176
• /
• 2012

Based on our experience in developing resistive humidity sensor, interdigital gold electrodes with different fingers and gaps have been fabricated on a glass epoxy (GE) substrate using screen printing techniques. The basic structure of the electrode consisted of a 3-, 4- and 5-fingers with gaps of 310 and 460 ${\mu}m$. Gold electrode/GE was prepared by first printing silver nanopaste, followed by consecutive electroless plating of Cu, Ni and then Au. Copolymer of [2-(methacryloyloxy)ethyl] dimethyl benzyl ammonium chloride (MDBAC) and methyl methacrylate (MMA) was used as a humidity-sensing polyelectrolyte, which was fabricated by a screen printing method on the Au electrode/GE substrate. The flexible humidity sensor showed acceptable linearity between logarithmic impedance and relative humidity in the range of 20-95%RH, low hysteresis of 1.5%RH, good response and recovery time of 75 sec at 1 V, 1 kHz, and $25^{\circ}C$. Electrode construction had a significant influence on the humidity-sensing characteristics of polymeric humidity sensors. The activation energy between electrode and ion conducting polyelectrolyte plays an important role in explaining the differences of humidity sensing characteristics such as temperature dependence, sensitivity, linearity and hysteresis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.560-568
• /
• 2005

The proposed Multi-level PDP sustain Driver is composed of the semiconductor devices with low voltage rating compared to those used in the prior circuit proposed by L. Wether, and it has two resonant periods during the charging (rising period) and discharging (falling period) the PDP in the sustaining voltage waveforms. In accordance with the change of timing phase$(T_{r1},\;T_{i1},\;T_{r2})$, the performance characteristics of a commercial PDP module has been carried out and compared the characteristic with the 42V6, made of LG Electronics co., Experimental results show that the performance characteristics of PDP module are greatly influenced by the variation of $T_{i1}\;and\;T_{r2}$. The variation of $T_{r1}$ do not influence much on the performances of PDP. With the conditions that $T_{r1}=60ns,\;T_{i1}=120ns,\;and\;T_{r2}=350ns$, we could get the performances listed as the luminance is increased $14.6\%$, the power consumptions is decreased $5.9\%$, the panel efficiency is increased $24.2\%$, module efficiency is increased $21.2\%$, compared to those shown in the commercial PDP module (42V6). Therefore, the proposed multi-level PDP sustain driver expected to be suitable to actual PDP module application.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.905-915
• /
• 2010

With rising food waste, the management activities have gained growing attention, and the disposal options, particularly utilization of food waste for energy recovery, become central. This research examines the factors affecting food waste generation and the tendency to resource food waste. The self-administered questionnaire survey was conducted in newly built multifamily housing estates to collect data, and 300 responses were analyzed. The statistical analysis showed that most of the respondents purchased food materials in largely franchised grocery stores and discarded food that had been too long refrigerated to edible. The lifecycle of food consumption was divided into three states - food purchase plan, cooking and food waste collection. Regression analysis was employed to find out the relationships between three stages and food waste generation or tendency to resource food waste. The results described that food waste generation being affected by the stage of food purchase plan (food waste removal conditions) was statistically significant while it's statistically significant that the stage of cooking (prepurchase considerations) influenced the attitude toward food waste resource. The research findings indicated that food is overconsumed, and further many viewed food waste resources as a proactive and integrative mode in the global wave of sustainability.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.16-22
• /
• 2018

Inconel713C which of a commercial Ni super alloy have the compositions of 70 wt.% Ni, 12 wt.% Cr, 6 wt.% Al and 4 wt.% Mo. In this study, solvent extraction has been performed to separate Mo from the synthetic leaching solution, formation of Inconel713C alloy similarly and is found the optimum conditions of recovery of Mo from the leaching solution. The effects of some variables, such as the nature and concentration of the extractants, $H_2SO_4$ concentrations, and the presence of impurities were investigated. The extraction percentage of Mo by Cyanex272 is 96% in the condition of pH 1 and 4% of concentration of Cyanex272 but Alamine336 is 99% in the condition of the range of pH 1 to 4 and 1 wt.% of concentration of Alamine336. In the case of Alamine336, the extraction percentage of Mo is increased by increasing of the concentration of Alamine336. The optimum condition of this experiment is pH 1 in aqueous phase, 1% concentration of Alamine336 and activation ratio of $H_2SO_4$ 1:0.5.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.42-50
• /
• 2019

In this study, the precipitation reaction of vanadium and ammonium chloride in aqueous solution was investigated in order to recover vanadium. Ammonium metavanadate having a crystal structure of [$NH_4VO_3$] was precipitated from aqueous solution containing vanadium at pH 9.2 ~ 9.4, and ammonium polyvanadate having a crystal structure of [$(NH_4)_2V_6O_{16}$] was precipitated when the pH of the aqueous solution containing vanadium was adjusted with sulfuric acid. Ammonium polyvanadate [$(NH_4)_2V_6O_{16}$] precipitated at a temperature of $80{\sim}90^{\circ}C$ and pH 2, and at a temperature of $40^{\circ}C$ and pH 6 ~ 8 of aqueous solution. In the acidic region of aqueous solution pH 2, the vanadium content of the aqueous solution should be at least 3,000 mg/L and the precipitation temperature should be maintained at $80^{\circ}C$ or higher in order to obtain a precipitation ratio of 99% or more. When the ammonium vanadate was precipitated in the alkaline region, the vanadium content was more than 10,000 mg/L and the precipitation temperature was maintained at $40^{\circ}C$ to increase the precipitation ratio. Aluminum was not precipitated regardless of the vanadium content and pH of the aqueous solution. However, the iron component reacts with ammonium chloride to precipitate into ammonium jarosite. Therefore, Fe component must be preferentially removed in order to increase the recovery of vanadium.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.3-11
• /
• 2021

In this study, the effect of the solubility of ammonium metavanadate and the decomposition ratio of ammonium ions on a precipitation reaction-the precipitation of ammonium metavanadate by adding ammonium chloride to a sodium vanadate solution-was investigated. As the precipitation temperature and pH increased, the decomposition ratio of ammonium ions increased, and the decomposition ratio was greater than 81% at 45 ℃ and pH 9.3. This was approximately four times higher than that at pH 8. The result of the precipitation reaction, in view of these two factors that significantly influence the precipitation reaction, was that the precipitation yield increased as the temperature increased. However, the effect of temperature was not significant above 35 ℃. A kinetic study of the precipitation reaction revealed that the activation energy of the reaction was 42.3 kJ/mol. Therefore, considering the solubility of ammonium metavanadate, the lower the temperature, the better the vanadium recovery yield. Additionally, considering the decomposition of ammonium ions, the lower the pH of the aqueous solution, the more advantageous. However, at pH 8 or less, sodium polyvanadate is precipitated and the purity of vanadium oxide may reduce.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.223-238
• /
• 2019

Purpose: This study aims at exploring implications of discourse and social practice produced by various stakeholders in politics, economy and society to provide useful material for effective disaster response in South Korea. Method: Applying the Critical Discourse Analysis model of Fairclough, this study analyzes the newspaper articles of three domestic press companies mainly about the November 2017 Pohang earthquake. Results: As a result, first, the three media companies point out the low effectiveness of disaster response manuals and evacuation training. Second, strengthening shelter services and expanding support for the victims are important for recovery from the earthquake. Third, to prevent the future damages, they suggest the implementation efforts to improve the seismic design and short message service based disaster alert system. Conclusion: Based on the findings, this study suggests to improve the practicality and effectiveness of disaster prevention measures, establish an organic and integrated disaster response system, emphasize the roles and participation of citizens, check the responsibility of experts, and make the media to form sound discourse on disaster response.

• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.211-224
• /
• 2012

Technology for energy recovery from waste can reduce the greenhouse gas emissions. So recently, there are several companies using RDF, RPF, WCF instead of using only coal fuel and it's part of the fuel on the increase. In this study, we developed Wood chip fuel $CO_2$ emission factor through fuel analysis. It's moisture content is 23%, received net calorific value is 2,845 kcal/kg, and received basis carbon is 34%. The result of emission factor is $105ton\;CO_2/TJ$, it's 5.9% lower than 2006 IPCC guideline default factor $112ton\;CO_2/TJ$. The gross GHG(Greenhouse gases) emissions of plant A is $178,767ton\;CO_2 eq./yr$, and Net GHG emissions is $40,359ton\;CO_2 eq./yr$. Therefore, the reduction of GHG emissions is $138,408ton\;CO_2/yr$ through using WCF, and I accounts for 77% of all GHG emissions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.3
• /
• pp.387-394
• /
• 2019

Objective: This study was to investigate the nutrient ileal digestibility of dried mealworm (Tenebrio molitor) larvae and compare with those of three animal protein by-products in growing pigs. Methods: A total of 12 crossbred ($[Landrace{\times}Yorkshire]{\times}Duroc$) growing pigs with average body weights of $24.12{\pm}0.68kg$ were surgically equipped with simple T-cannulas after being deprived of feed for 24 h according to published surgical procedures. These pigs had a recovery period of two weeks. A total of 12 pigs were assigned to individual metabolic crates and allotted to one of four treatments with 3 replicates in a fully randomized design. Dietary treatments included the following: i) Fish meal, corn-vegetable by-product basal diet+9.95% fish meal; ii) Meat meal, corn-vegetable by-product basal diet+9.95% meat meal; iii) Poultry meal, cornvegetable by-product basal diet+9.95% poultry meal; iv) Tenebrio molitor, corn-vegetable by-product basal diet+9.95% dried Tenebrio molitor larvae. Results: Results showed that the apparent ileal digestibility (AID) of Lys was higher (p<0.05) in pigs fed Tenebrio molitor diet than that in pigs fed fish meal diet. Pigs fed Tenebrio molitor diet showed increased (p<0.05) AID of His and Arg compared to pigs fed Fish meal or Meat meal diet. The AID of Cys was increased (p<0.05) in pigs fed poultry meal and Tenebrio molitor diets compared to that in pigs fish meal diet. Pigs fed meat meal, poultry meal, and Tenebrio molitor diets showed higher (p<0.05) standardized ileal digestibility (SID) of total energy compared to pigs fed fish meal diet. The SID of Arg was higher (p<0.05) in pigs fed Tenebrio molitor diet than that in pigs fed fish meal or meat meal diet. Furthermore, pigs fed poultry meal or Tenebrio molitor diets showed increased (p<0.05) SID of Cys compared to pigs fed fish meal diet. Conclusion: In conclusion, providing pigs with diets that contained Tenebrio molitor larvae meal improved AID and SID of nutrients as well as essential and non-essential amino acids. The digestibility of dried mealworm larvae protein and its utilization in vivo are also good. Therefore, dried mealworm larvae protein can be used as protein source at 10% level in growing pigs.

• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.207-212
• /
• 2019

Non-aqueous solvents (NASs) are generally known to be barely miscible, and reactive with polar compounds, such as water. However, water can interact with some NASs, which can be used as a new means for water recovery from saline water. This study explored the fate of water and salt in NAS, when saline water is mixed with NAS. Three amine solvents were selected as NAS. They had the same molecular formula, but were differentiated by their molecular structures, as follows: 1) NAS 'A' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain, 2) NAS 'B' with symmetrical structure and having the hydrophilic group (NH) at the middle of the straight carbon chain, 3) NAS 'C' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain but possessing a hydrophobic ethyl branch in the middle of the structure. In batch experiments, 0.5 M NaCl water was blended with NASs, and then water and salt content in the NAS were individually measured. Water absorption efficiencies by NAS 'B' and 'C' were 3.8 and 10.7%, respectively. However, salt rejection efficiency was 98.9% and 58.2%, respectively. NAS 'A' exhibited a higher water absorption efficiency of 35.6%, despite a worse salt rejection efficiency of 24.7%. Molecular dynamic (MD) simulation showed the different interactions of water and salts with each NAS. NAS 'A' formed lattice structured clusters, with the hydrophilic group located outside, and captured a large numbers of water molecules, together with salt ions, inside the cluster pockets. NAS 'B' formed a planar-shaped cluster, where only some water molecules, but no salt ions, migrated to the NAS cluster. NAS 'C', with an ethyl group branch, formed a cluster shaped similarly to that of 'B'; however, the boundary surface of the cluster looked higher than that of 'C', due to the branch structure in solvent. The MD simulation was helpful for understanding the experimental results for water absorption and salt rejection, by demonstrating the various interactions between water molecules and the salts, with the different NAS types.