• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.585-592
• /
• 2002

This study was conducted to investigate the effect of nutrient level (metabolizable energy and crude protein, 2,843kcal/kg and 19.46% at 2 to 3 week, 3,072kcal/kg and 18.38% at 4 to 6 week, 3,109 kcal/kg and 17.26% at 7 to 8week, respectively, and feeding form was ground $\longrightarrow$ crumble $\longrightarrow$ pellet in control, ground $\longrightarrow$ crumble $\longrightarrow$ pellet in treatment 1, crumble $\longrightarrow$ crumble $\longrightarrow$ pellet in treatment 2, pellet $\longrightarrow$ pellet $\longrightarrow$ pellet in treatment 3 for broiler during 8 weeks. Also the effects of supplemented with charcoal(1%) in total mixed treatment feed was investigated. The crude protein, crude fat in broiler meat ranged from 22.22${\sim}$23.40%, and 0.30${\sim}$0.45%, respectively. Especially, treatment 2 was lower than other treatment (P<0.05). The heating loss tend to be increased at control. Shear force and pH tend to be decreased at T3(1.21kg, 5.89). Control and T2 were significantly lighter in color (‘L’) than the T1 and the ‘a’ ranged from 0.19${\sim}$0.85 and T1 was the lowest ‘b’ among other treatment. The panel test, texture, Aroma were not significantly among the an experimental group (P<0.05). Myristic acid and arachidonic acid of T1 was significantly higher than that other treatment and oleic acid, U/S(unsaturated/ saturated) rate T2 was significantly higher than other experimental group(P<0.05). Among amino acid, cystine, glutamic acid, valine, iso-leucine, leucine, lysine, arginine in T1 and T2 was higher than control and T3.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.77-85
• /
• 2013

Purpose: The accurate movement of gantry rotation, collimator and correct application of dose rate are very important to approach the successful performance of Volumetric Modulated Arc Therapy (VMAT), because it is tightly interlocked with a complex treatment plan. The interruption and restart of dose delivery, however, are able to occur on treatment by various factors of a treatment machine and treatment plan. If unexpected problems of a treat machine or a patient interrupt the VMAT, the movement of treatment machine for delivering the remaining dose will be restarted at the start point. In this investigation, We would like to know the effect of interruptions and restart regarding dose delivery at VMAT. Materials and Methods: Treatment plans of 10 patients who had been treated at our center were used to measure and compare the dose distribution of each VMAT after converting to a form of digital image and communications in Medicine (DICOM) with treatment planning system (Eclipse V 10.0, Varian, USA). We selected the 6 MV photon energy of Trilogy (Varian, USA) and used OmniPro I'mRT system (V 1.7b, IBA dosimetry, Germany) to analyze the data that were acquired through this measurement with two types of interruptions four times for each case. The door interlock and the beam-off were used to stop and then to restart the dose delivery of VMAT. The gamma index in OmniPro I'mRT system and T-test in Microsoft Excel 2007 were used to evaluate the result of this investigation. Results: The deviations of average gamma index in cases with door interlock, beam-off and without interruption on VMAT are 0.141, 0.128 and 0.1. The standard deviations of acquired gamma values are 0.099, 0.091, 0.071 and The maximum gamma value in each case is 0.413, 0.379, 0.286, respectively. This analysis has a 95-percent confidence level and the P-value of T-test is under 0.05. Gamma pass rate (3%, 3 mm) is acceptable in all of measurements. Conclusion: As a result, We could make sure that the interruption of this investgation are not enough to seriously affect dose delivery of VMAT by analyzing the measured data. But this investigation did not reflect all cases about interruptions and errors regarding the movement of a gantry rotation, collimator and patient So, We should continuously maintain a treatment machine and program to deliver the accurate dose when we perform the VMAT for the many kinds of cancer patients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.266-273
• /
• 2020

This study was undertaken to determine the effects of diet supplementation with complex probiotics (CPB), on growth performance, nutrient digestibility, blood metabolites, noxious gas, and fecal microflora in weaning pigs. On the basis of body weight, a total of 234 weaned pigs (Landrace×Yorkshire×Duroc, 6.14±0.78kg) were randomly allotted to 3 treatments and 6 replicates (13 pigs per pen). The experimental diets were fed in a meal form for 28 days (days 0-14, PhaseI, and days 15-28, PhaseII). The dietary treatment groups were as follows: T1 (basal diet), T2 (T1+0.13% CPB) and T3 (T1+0.25% CPB). The CPB supplement contained Bacillus subtilis 1.0×10⁶ CFU/g, Enterococcus faecium 1.0×10⁶ CFU/g, Saccharomyces cerevisiae 1.0×10⁶ CFU/g, Bacillus licheniformis 3.0×10⁸ CFU/g, and Bacillus polyfermenticus 3.0×10⁸ CFU/g. Pigs fed the T3 diet showed an increase (p<0.05) in the overall average daily gain and average daily feed intake, increased (p<0.05) crude protein digestibility in PhaseI, and greater (p<0.05) dry matter and gross energy digestibility in PhaseII. Supplementation of CPB had no effect on the blood profile. Furthermore, pigs fed the T3 diet had lower (p<0.05) NH₃ emission and overall count of fecal Clostridium spp. In conclusion, we believe that CPB supplementation has a beneficial effect on growth performance, nutrient digestibility, noxious gas, and fecal microflora in weaning pigs.

• The Korean Nurse
• /
• v.31 no.2
• /
• pp.51-69
• /
• 1992

Grief that is not acknowledged and worked through may manifest itself in some emotional, mental or physical problem. In recent years much has been learned about coping with grief which the hospice program can utilize to help family members cope with their grief. This study was carried out to determine the helpfulness of the bereavement care of Severance Hospice and to learm more about the grief response of the bereaved. The tools used to collect data were an assessment form used in the bereavement program and the Grief Experience Inventory developed by Sanders and revised and translated 'by the researcher. Data was obtained from bereaved family members(54 for the final grief assessment and 39 for the grief response assessment) receiving bereavement follow-up, from July 1989 to March 1991. Results of the study were as follows: 1. Final Grief Assessment Regarding the resolution of their grief the majority of the bereaved accepted the reality of the death of their family member, while slightly more than three-quarters were able to express their feelings toward their loss. A large majority had returned to activities of daily living well or fairly well and had reinvested their energy in a person other than the deceased. In addition, the physical condition of the majority was good or fairly good. A majority of the bereaved considered the bereavement care to be helpful and almost three-quarters were not considered to be in need of more follow-up. 2. Grief Response Assessment Age was found to have a modoerately positive correlation to appetite disturbance(r=.41, P<.Ol) and loss of vigor(r=.37, P<.Ol) A moderately positive correlation was found between the number of contacts and sleep disturbance(r=2.38, P<.01) Significant differences were found between men and women in regard to guilt(t=2.38, P<.05), social isolation(t=2.44, P<.05) and depersonalization(t=2.07, P<.05) with men having the more intense grief. Significant differences were found in the grief responses of somatization(F=5.82, P<.001), physical symptoms(F=5.87, P<.OOl), appetite disturbance(F=4.40, P<.Ol), despair(3.79, P<,Ol), anger(Fp2.83, P<.05), social isolation(F=3.61, P<.05), guilt(F=3.62, P<.05) and depersonalization (F = 2.58, P <.05). In the first six of these grief responses mothers scored highest, followed by husbands and then wives, In the grief response of guilt, daughters scored highest and on the grief response of depersonalization sons scored highest. Only one grief response, that of sleep disturbance(t= -2.19, P<.05) was found to be statistically significant, with those family members who died at home having the higher scores. Based on the results of this study several suggestions are presented as follows: 1. Since unresolived grief can have a detrimental effect on the bereaved person's mental and phys. ical health it would be good for the nurse, to include questions related to death of family members and the bereaved person's response to the grief, in her nursing assessment. And in the case of unresolved grief the nurse should encourage the person to talk with a trusted friend or counselor and express their fellings of grief. 2. A study to determine the degree of resolution of the grief of those in the bereavement program could be carried out by use of the Grief Experience Inventory early in their bereavement and again 13 months after the death of their family member. 3. A comparison of the grief response of the bereaved in the bereavement program and bereaved not in the program could be carried out using the Grief Experience Inventory. 4. After bereavement programs have been started in other hospice programs it would be good to carry out a joint study of bereavement outcomes of those in the bereavement programs.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.641-646
• /
• 2001

The $CoSi_2$ layers have been in-situ grown on undoped poly-Si by the reactive chemical vapor deposition of $Co({\Eta}^5-C_5H_5)(CO)_2$ at $650^{\circ}C$ and their thermal stabilities have been investigated in the temperature range of 800 to $1000^{\circ}C$. The $CoSi_2$ layer grown by the in-situ method had grains with large area of (111) plane, while grains with little area of (111) plane appeared on the $CoSi_2$ layer grown by the conventional two-step method where $CoSi_2$ formed first and transformed to $CoSi_2$. The thermal stability of the $CoSi_2$ layer grown by the in- situ process was improved by more than $100^{\circ}C$ higher than that of the $CoSi_2$ layer grown by the conventional two-step process. The $CoSi_2$ layer grown in situ on a large-grained Poly-Si was stable up to $950^{\circ}C$. The effect of stability improvement by the in situ growth was more pronounced when the grain sizes of the poly-Si substrate were small. The improved thermal stability of the in-situ grown $CoSi_2$ layer could be mainly due to the formation of a uniform $CoSi_2$ layer with the $CoSi_2$ grains, which are in the form of epitaxial-like growth on the each poly-Si grains, causing a reduction of the interfacial energy of the system.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.333-340
• /
• 2010

The Korean Dendropanax lacquer, made from a natural resinous sap from Dendropanax orbifera Lev., was used as a golden and transparent varnish for the traditional artifacts (armor uits, helmets, arrowheads, etc.) to make them be brilliant golden color. The cured film of the acquer has excellent protective properties such as weatherability, water resistance, and nticorrosive. But, one of disadvantages is that takes a long time and much energy to fulfill curing the lacquer. The chemical constituents of the lacquer contained conjugated diene compounds s the photopolymerizable monomers. These monomers easily polymerized in sunlight to form olden-colored, hard-coating films in a short time. Photooxidation may be one of the most mportant reactions in the chemistry of the lacquer. Although the Korean Dendropanax Lacquer hould be dried to a thoroughly dry stage to achieve optimal film properties, curing with elevated emperatures may be required for the protracted curing time at atmospheric temperature. So we ntended to accelerate the curing rate of the lacquer by dual curing of thermal and radiation uring. The effect of thermal initiator on the thermal curing reaction was evaluated by monitoring he changes in double bond peak with FT-IR. Then the curing rate of the lacquer blended with hermal initiator and photoinitiator together was measured during dual curing using a RPT with V spot curing machine. Thermal initiator not only accelerated the curing rate but also improved he physical property. And the curing rate of the Korean Dendropanax lacquer was improved by ual curing method of thermal and UV curing. According to these results, the application area of he Korean Dendropanax lacquer could be expanded to surface coatings for electronic devices uch as mobile phones or electronics.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.4
• /
• pp.299-305
• /
• 2010

Purpose: Adipose tissue is located beneath the skin, around internal organs, and in the bone marrow in humans. Its main role is to store energy in the form of fat, although it also cushions and insulates the body. Adipose tissue also has the ability to dynamically expand and shrink throughout the life of an adult. Recently, it has been shown that adipose tissue contains a population of adult multipotent mesenchymal stem cells and endothelial progenitor cells that, in cell culture conditions, have extensive proliferative capacity and are able to differentiate into several lineages, including, osteogenic, chondrogenic, endothelial cells, and myogenic lineages. Materials and Methods: This study focused on endothelial cell culture from the adipose tissue. Adipose tissues were harvested from buccal fat pad during bilateral sagittal split ramus osteotomy for surgical correction of mandibular prognathism. The tissues were treated with 0.075% type I collagenase. The samples were neutralized with DMEM/and centrifuged for 10 min at 2,400 rpm. The pellet was treated with 3 volume of RBC lysis buffer and filtered through a 100 ${\mu}m$ nylon cell strainer. The filtered cells were centrifuged for 10 min at 2,400 rpm. The cells were further cultured in the endothelial cell culture medium (EGM-2, Cambrex, Walkersville, Md., USA) supplemented with 10% fetal bovine serum, human EGF, human VEGF, human insulin-like growth factor-1, human FGF-$\beta$, heparin, ascorbic acid and hydrocortisone at a density of $1{\times}10^5$ cells/well in a 24-well plate. Low positivity of endothelial cell markers, such as CD31 and CD146, was observed during early passage of cells. Results: Increase of CD146 positivity was observed in passage 5 to 7 adipose tissue-derived cells. However, CD44, representative mesenchymal stem cell marker, was also strongly expressed. CD146 sorted adipose tissue-derived cells was cultured using immuno-magnetic beads. Magnetic labeling with 100 ${\mu}l$ microbeads per 108 cells was performed for 30 minutes at $4^{\circ}C$ a using CD146 direct cell isolation kit. Magnetic separation was carried out and a separator under a biological hood. Aliquous of CD146+ sorted cells were evaluated for purity by flow cytometry. Sorted cells were 96.04% positivity for CD146. And then tube formation was examined. These CD146 sorted adipose tissue-derived cells formed tube-like structures on Matrigel. Conclusion: These results suggest that adipose tissue-derived cells are endothelial cells. With the fabrication of the vascularized scaffold construct, novel approaches could be developed to enhance the engineered scaffold by the addition of adipose tissue-derived endothelial cells and periosteal-derived osteoblastic cells to promote bone growth.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.851-858
• /
• 2010

In this study, waste glass and bottom ash were used as basic materials in order to secure a recycling technology of by-products which was mostly discarded and reclaimed. In addition, because softening point of waste glass is less than $700^{\circ}C$ and bottom ash includes combustible material, it was possible to manufacture low-temperature sintering lightweight aggregates for energy saving at $800{\sim}900^{\circ}C$ that it is as much as 20~30% lower than sintering temperature of existing lightweight aggregates. Thermal conductivity of newly-developed lightweight aggregates was 0.056~0.105W/m. K and its porosity was 40.36~84.89%. A coefficient of correlation between thermal conductivity and porosity was -0.97, it showed very high negative correlationship. With this, we were able to verify that porosity is key factor to affect thermal conductivity. Microstructure of lightweight aggregates by $CaCO_3$ content and replacement ratio of bottom ash in the variation of temperature were that $CaCO_3$ content increased along with pore size while replacement ratio of bottom ash increased as pore size decreased. Specially, most pores were open pore instead of closed pore of globular shape when replacement ratio of bottom ash was 30%, and pore size was small about 1/10~1/5 as compared with case in bottom ash 0~20%. In addition, open pore shapes were remarkably more irregular form of open pore in $900^{\circ}C$ than $700^{\circ}C$ or $800^{\circ}C$ when replacement ratio of bottom ash was 30%. We reasoned hereby that these results will influence on absorption increase, strength and thermal conductivity decrease of lightweight aggregates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.453-463
• /
• 1997

The contents of high school 'Common science' textbooks was analyzed qualitatively and quantitatively. Seven common science textbooks were selected and its contents, structure, inquiry, activities, appendix and its characteristics were investigated, and analyzed using the Goal Clusters of Project Synthesis and Romey's indices of text evaluation were calculated. The contents of each unit are not much different among textbooks because they are written according to the curriculum ordinance and textbook guidelines of the Ministry of Education. The textbooks was consist of $471{\sim}519$ pages. It was distribute similarly among the chapter of 'materials', 'forces', lives' and 'earth'. The chapter of 'energy' and 'environment' was treat significantly. The contents and structure of common science is a mere physical consolidation. I make an alternative plan that a topic form. Inquiry activities used in the textbooks are 11 type, however most of that is interpretation of data, experiment, survey and discussion. Ninety six percents of the experiment, belong to the 1st level, four percents of that belong to the 2nd level of the Schwab's inquiry level and there are no activities of the 3rd level. Little attention is given to Goal Cluster I, II, IV in the common science textbooks currently employed. Its content should be broadened to include all Goal Clusters of Project Synthesis. Homey's indices representing the degrees of student involvement. are $0.57{\sim}1.14$ for sentence analysis, $0.60{\sim}1.67$ for figure and diagram analysis, $0.67{\sim}1.50$ for analysis of questions at chapter ends, respectively, student activity per page investigated being $0.6{\sim}0.9$. But chapter summaries cease to repeats the conclusions of the chapter also it be rather formally and inattentively written.