• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.103-108
• /
• 2023

본 연구에서는 SiC 기반의 1200V급 전력 MOSFET을 최적 설계하기 위하여 공정 및 설계 파라미터를 변화시키면서 실험을 수행한 후, 필수적인 전기적 특성을 도출하였다. 그리고 최종적으로 설계하고자 하는 트렌치 게이트형 SiC 전력 MOSFET 소자의 우수성을 확보하기 위하여 플래너 게이트 SiC 전력 MOSFET을 같은 조건하에 설계하여 전기적인 특성을 도출하여 트렌치 게이트형 SiC 전력 MOSFET 소자와 비교 분석을 하였다. 비교 분석한 결과, 항복전압을 그대로 유지한 상태에서 온 저항은 각각 플래너게이트 전력 MOSFET은 1,840mΩ, 트렌치 게이트 전력 MOSFET는 40mΩ으로 약 40배 이상 우수한 특성을 도출하였다. 온 저항은 에너지 효율에 직접적인 영향을 끼치는 바 에너지 효율에 있어 우수한 결과를 도출한 것으로 판단되었다. 본 실험을 통해 최적화된 소자는 1200V급에 일반적으로 사용되었던 IGBT소자를 충분히 대체 가능한 것으로 판단되었다.

• 한국안전학회지
• /
• 제29권1호
• /
• pp.47-53
• /
• 2014

The application of advanced Main Control Room(MCR) is accompanied with lots of changes and different forms and features through the virtue of new digital technologies. The characteristics of these digital technologies and devices give many opportunities to the interface management, and can be integrated into a compact single workstation in advanced MCR so that workers can operate the plant with minimum physical burden under any operation conditions. However, these devices may introduce new types of human errors and thus a means to evaluate and prevent such errors is needed, especially those related to characteristics of digital devices. This paper reviewed the new type of human error hazards of tasks based on digital devices and surveyed researches on physiological assessment related to human error. An experiment was performed to verify human error hazards by physiological responses such as EEG which was measured to evaluate the cognitive workload of operators. And also, the performances of four tasks which are representative in human error hazard tasks based on digital devices were compared. Response time, ${\beta}$ power spectrum rate of each task by EEG, and mental workload by NASA-TLX were evaluated. In the results of the experiment, the rate of the ${\beta}$ power was increased in the task 1 and task 4 which are searching and navigating task and memory task of hierarchical information, respectively. In case of the mental workload, in most of evaluation items, task 1 and 4 were highly rated comparatively. In this paper, human error hazards might be identified by highly cognitive workload. Conclusively, it was concluded that the predictive method which is utilized in this paper and an experimental verification can be used to ensure the safety when applying the digital devices in Nuclear Power Plants (NPPs).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1246-1247
• /
• 2008

With recent advanced in portable electric devices, wireless sensor, MEMS and bio-Mechanics device, the new typed power supply, not conventional battery but self-powered energy source is needed. Particularly, the system that harvests from their environments are interests for use in self powered devices. For very low powered devices, environmental energy may be enough to use power source. Therefore, in other to made piezoelectric energy harvesting device, PMN-PZT thick film was formed by the screen printing method on the Ag/Pd coated alumina substrate. The layer was 8 layers and slurry where a-terpineol, ethycellulose, ferro B-75001 as Vehicle, PMN-PZT powder used are fabricated by ball mill. The output power quality was be also investigated by changing the load resistance, weight and frequency. The made piezoelectric energy harvesting device was resulted from the conditions of 33$k{\Omega}$, 0.25g, 197Hz respectively. The thick film was prepared at the condition of 2.75Vrms, and its power was 230${\mu} W$ and its thickness was 56${mu}m$. The piezoelectric energy harvesting device output voltage was increased, when the load weight, load resistance was increasing and resonance frequency was diminishing. The other side, resonance frequency was diminished, when the weight was increasing. And output power was continuously it changed by load resistance, output voltage, weight and resonance frequency.

• 인터넷정보학회논문지
• /
• 제4권4호
• /
• pp.15-25
• /
• 2003

무선 Ad-hoc 네트워크에서는 기존의 유선 네트워크에서와는 달리 휴대용 기기들만으로 네트워크 망이 형성 되어있고 이때 휴대용 기기 들은 대부분 배터리를 에너지원으로 사용한다. 그러므로 무한의 에너지를 갖고 있다고 볼 수 있었던 종전의 유선 네트워크에서와는 달리 배터리를 에너지원으로 사용하는 무선 Ad-hoc 네트워크에서는 효율적인 에너지 자원 관리가 중요한 이슈가 된다. 이러한 특성을 고려한 연구 중 전체 휴대용 단말기에서 일부를 선출하고 이렇게 선출된 coordinator들만 데이터의 전송에 참여하게 하고 나머지 단말기들은 수면 모드로 전환시킴으로 인해 시스템의 전력소비를 줄이는 방법에 대한 연구들이 진행되고 있다. 선행 연구에서는 수면 모드의 노드를 최대화함으로써 전체 네트워크의 전력소비를 최소화하려는 노력을 하고 있으나, 선출되는 coordinator 수의 최소화가 항상 시스템 활동시간의 증가를 보장하지는 않는다. 본 논문에서는 각 단말기에서 데이터 전송에 필요한 에너지와 노드들의 연결성을 함께 고려해서 Coordinator를 선출함으로써 네트워크의 시스템 활동시간을 기존의 방법보다 더 증가시키는 알고리즘을 제안한다.

• 센서학회지
• /
• 제28권5호
• /
• pp.311-317
• /
• 2019

Rotating devices are commonly installed in power plants and factories. This study proposes a self-powered sensor node that is powered by converting the vibration energy of a rotating device into electrical energy. The self-powered sensor consists of a piezoelectric harvester for self-power generation, a rectifier circuit to rectify the AC signal, a sensor unit for measuring the vibration frequency, and a circuit to control the light emitting diode (LED) lighting. The frequency of the vibration source was measured using a piezoelectric-cantilever-type vibration frequency sensor. A green LED was illuminated when the measured frequency was within the normal range. The power generated by the piezoelectric harvester was determined, and the LED operation was assessed in terms of the vibration frequency. The piezoelectric harvester was found to generate a power of 3.061 mW or greater at a vibration acceleration of 1.2 g ($1g=9.8m/s^2$) and vibration frequencies between 117 and 123 Hz. Notably, the power generated was 4.099 mW at 122 Hz. As such, our self-powered sensor node can be used as a module for monitoring rotating devices, because it can convert vibration energy into electrical energy when installed on rotating devices such as air compressors.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2117-2123
• /
• 2008

This paper describes the portal system architecture of large consumers for ESP(Energy Service Provider) to provide customers with various value added services such as monitoring and controlling a wide variety of electric devices in consumer's premises for optimal energy management from both consumer side and ESP side, and the prototype implementation of 2 kinds of value added services. The architecture is composed of the device portal which gathers the information from electric devices and controls them and the consumer portal which can make ESP operate the optimal energy management with two-way communications. The demand side management and energy management functions was chosen and implemented for the prototype system as value added services. The prototype was designed to create, manage, and trace the events about services between ESP and customers.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.619-624
• /
• 2015

Owing to miniaturization and low-power electronics, mobile, implanted, and wearable devices have become the main trends of electronics during the past decade. There has been much research regarding energy harvesting to achieve battery-free or self-powered devices. The optimal design problems of a double-pendulum kinetic-energy harvester from human motion are studied in this paper. For the given form factor, the weight of the harvester, and the known human excitation, the optimal design problem is solved using a dynamic non-linear double-pendulum model and an electric generator. The average electrical power was selected as the performance index for the given time period. A double-pendulum harvester was proven to be more efficient than a single-pendulum harvester when the appropriate parameters were used.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1672-1674
• /
• 2005

The PV arrays were designed as sunshade devices at the building in the KIER(Korea Institute of Energy Research). The arrays are shaded by the above placed devices. In this paper, it was analyzed that the performance and characteristic of the BIPV system by partial shading could reliably be calculated with Solar Pro.

• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.322-332
• /
• 2022

Energy storage capacitors based on dielectric ceramics with superior polarization properties and dielectric constant can provide much higher output power density due to their very fast energy charging/discharging rates, which are particularly suitable for operating pulsed-power devices. For an outstanding energy storage performance of dielectric capacitor, a large recoverable energy density could be derived by introducing a slim polarization-electric field hysteresis loop into dielectric materials by various technical approaches. Many research teams have explored various dielectric capacitor technologies to demonstrate high output power density and ultrafast charging/discharging behavior. This article reviews the recent research progress in high-performance dielectric capacitors for pulsed-power electronic applications.

• ETRI Journal
• /
• 제44권5호
• /
• pp.759-768
• /
• 2022

A novel energy harvesting technique that uses conducted electromagnetic interference as an energy source is presented. Conducted EMI generated from fluorescent light using a switched-mode power supply was measured and modeled as an equivalent voltage source. Two types of rectifier circuits-a bridge rectifier and a voltage doubler-were used as the harvesting devices for conducted EMI source. The matching networks were designed based on the equivalent model, and the harvested power was improved. The implemented energy harvester produces a regulated power over 68.9 mW and current over 15.1 mA while a regulated voltage can be selected between 3.3 V and 5 V. The proposed system shows the highest harvesting power indoor environment and can provide enough power for the Internet of Things devices.