• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2005년도 하계 학술대회 논문집
• /
• pp.264-267
• /
• 2005

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.339-342
• /
• 1996

In this paper, the method for controlling PUMA robot using F/T sensor is described. In the part of the setup automation, robot is used. The F/T sensor is located at robot end-effector and various experiments are executed such as peg in hole, gripping objects, tool changing, etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.104.1-104
• /
• 2002

$\textbullet$ Proper definition of manipulability ellipsoid $\textbullet$ Volume and directional measures of manipulability $\textbullet$ Kinematic modeling as a serial connection $\textbullet$ Configuration dependent singularity $\textbullet$ Effect of nonholonomy on manipulability $\textbullet$ Effect of end-effector positioning on manipulability $\textbullet$ Effect of serial cooperation on manipulability

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.317-320
• /
• 1986

A co-operative position control is proposed for two robot manipulators with 5 degree of freedoms to transfer an object following a specified trajectory, where each manipulator is assumed to change the posture of its end effector without releasing the object.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.577-582
• /
• 1987

A co-operative position control is proposed for two robots manipulation with five degrees of freedom to transfer an object following a specified trajectory, where each manifulator is assumed to change the postrue of its end effector without releasing the object.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.631-636
• /
• 1995

A robotic wrist with three rolling motion is considered. It has the gear trains with three independent input parameters and mechanical interference in their motion. This paper presents dervation of basic kinematic equations that relate the input parameters and the orientation of the end-effector, determination of singularities in its motion, and the computational procedure of the inverse kinematics.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.204-209
• /
• 2004

This paper describes dynamic manipulability analysis of robotic arms moving in viscous fluid. The Manipulability is a functionality of manipulator system in a given configuration and under the limits of joint ability with respect to the tasks required to bt performed. To investigate the manipulability of underwater robotic arms, a modeling and analysis method are presented. The dynamic equation of motion of underwater manipulator is derived from the Lagrange - Euler equation considering with the hydraulic forces caused by added mass, buoyancy and hydraulic drag. The hydraulic drag term in the equation: is established as analytical form using Denavit - Hartenberg (D-H) link coordination of manipulator. Two analytical approaches based on Manipulability Ellipsoid are presented to visualize the manipulability of robotic arm moving in viscous fluid. The one is scaled ellipsoid which transforms the boundary of joint torque to acceleration boundary of end-effector by normalizing the torque in joint space while the other is shifted ellipsoid which depicts total acceleration boundary of end-effector by shifting the ellipsoid in work space. An analysis example of 2-link manipulator with proposed analysis scheme is presented to validate the method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1593-1597
• /
• 2003

The home service robot supports human beings by performing various kinds of works at home. This paper presents a simple control method for opening a door from the viewpoint of the mobile manipulation. The simulation shows various results of path planning and motion planning for opening a door. The joint trajectories were generated by the simulation system. In general, a six-axis force/torque sensor at an end-effector is needed in order to maintain the static equilibrium of the manipulator. But we show another method. From three components of applied forces which was directly obtained by the three-axis force sensor and three components of applied forces which was indirectly estimated by the joint-torque sensors, all of joint torques that will exactly balance forces at the end-effector in the static situation can be found. It is more practical method than using a six-axis force sensor in a wrist. Experimental results have shown that the opening a door can be realized more effectively from the suggested control method of mobile manipulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1615-1620
• /
• 2003

Kinematic calibration is a process whereby the actual values of geometric parameters are estimated so as to minimize the error in absolute positioning. Measuring all components of Cartesian posture, particularly the orientation, can be difficult. With partial pose measurements, all parameters may not be identifiable. This paper proposes a new device that can identify all kinematic parameters with partial pose measurements. Study is performed for a six degree-of-freedom fully parallel Hexa Slide manipulator. The device, however, is general and can be used for other parallel manipulators. The proposed device consists of a link with U joints on both sides and is equipped with a rotary sensor and a biaxial inclinometer. When attached between the base and the mobile platform, the device restricts the end-effector's motion to five degree-of-freedom and can measure position of the end-effector and one of its rotations. Numerical analyses of the identification Jacobian reveal that all parameters are identifiable. Computer simulations show that the identification is robust for the errors in the initial guess and the measurement noise. Intrinsic inaccuracies of the device can significantly deteriorate the calibration results. A measurement procedure is proposed and formulations of cost functions are discussed to prevent propagation of the inaccuracies to the calibration results.

• 조명전기설비학회논문지
• /
• 제13권2호
• /
• pp.55-62
• /
• 1999

자동화 설비시스템에서 부품의 조립, 가공 등 복잡하고 정교한 임무를 수행시키기위해서는 end-effector의 이동경로 궤적에 대한 추적제어 뿐만 아니라 목표물에 대하여 접촉하는 힘의 궤적에 대한 추적제어가 필수적이다. 본 논문에서는 외란이나 시스템의 파라미터 변동 및 불확실설 등이 존재하는 자동화 설비시스템을 강인하고 정밀하게 제어할 수 ldT도로 하기 위해 동적 신경망 처리(DNP)라 불리우는 신경망 제어기를 설계하였다. 또한 자동화 설비시스템의 매니플레이터에 역기구학적인 좌표변환을 계산하기 위한 학습구조를 개발하였으며, DNP가 이용될수 있는 예를 설명하고자 한다. 제안된 동적 신경망인 DNP의 구조와 학습 알고리즘을 제시하고 컴퓨터 모의 실험을 통해 DNP를 이용한 제안된 학습법의 성능을 확인한다.