• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.3
• /
• pp.1-17
• /
• 1999

The purpose of this study is to evaluate the creation techniques of artificial wetland, one of biotopes developed to promote biodiversity in urban areas, and to look for improvement steps. Specifically, artificial wetland creation techniques were categorized into living environment and living creature classification. Being living conditions for creations, habitat environment was reviewed with a focus on water and soil environments. Living creatures were classified into plants, insects, fish, and birds. The evaluation of creation techniques was done in post-construction evaluation while considering the creation of habitats for living creatures. Intervention by users, changes in living environment and living species, and relevance of creation techniques were reviewed. Key results of this study are as follows. (1) Water environment for the living environment of creatures provides a suitable environment conditions for the living of creatures through a process easing the use of piped water. Various water depths and embankment appear to have a positive impact on the living of aquatic life. In particular, embankment covered in soil naturally played an important role as a place for the activities of aquatic insects and young fish as well as the growth of aquatic plants. (2) Various aquatic and ground plants to promote insect-diversity, shallow water, and old-tree logs had contributed greatly in increasing the types and number of insects. Aquatic insects. Aquatic insects were seen much particularly in areas where aquatic plants are rich but water is shallow than any other areas. (3) A space piled with stone to provide habitats for fish was not much used. However, it was observed that fish used embankment built with natural stones and embankment using logs in areas where water is deep. In addition, it was confirmed that 1,500 fish that had been released propagated using various depths and places for birth. (4) It was analyzed that techniques (creation of island, log setting, and creation of man-made bird nests) to provide habitats and to attract birds are not serving their roles. In such a case, it is believed that species had not increased due to the smallness as well as isolated features of the area. Based on theoretical review, they are judged to be areas that are likely to be used when a greater variety of birds is introduced. It is judged that attracting and keeping more birds at the site, such spaces need to be linked systematically in the future in terms of building eco-network while ensuring an adequate living areas. (5) In the study areas, users intervened greatly. As a result, a blockage was created preventing the normal growth of plants and non-indigenous plants were introduced. In order to limit the intervention by users, setting enough buffer zones, and environment education programs were urgently required. D/H=1>Hyangkyo> houses on the river>temples>lecture halls. D/H ratio of the backside areas is as follows. D/H=1>Hyangkyo>houses on the river>lecture halls. 4. Inner garden were planted deciduous than evergreen trees with Lagerstroemia indica. Enclosed dominant trees were planted by Pinus densiflora, Querces seuata. construct GEM strain, and examined for the expression and functional stability in microcosms.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.120-136
• /
• 2016

This study, views the color of scenery not as a static state, but rather as a continuous sequence of perceptions that incorporates the concept of time. This study derived techniques to quantitatively analyze the flow and data from this sequence. By utilizing this, urban color trends can be based on openness. This is very close to what would be experienced by an actual viewer: it extracted color data and visual amount from frames at 2-second intervals by shooting a video of the color sequence of the city as seen from both the left and right sides from the inside of the monorail (line 3 of the Daegu urban railway). These images were classified by color group, brightness, chroma, high chroma distribution derived techniques such as openness of space, brightness level, clarity level, high-chroma distribution and code, advantage of visual amount, dominant factor exposure, hot and cold color image and dynamic of sequence rhythm. During the derived sequence, the data determines the openness in the visual amount of sky and it was found that the tendency of the colors of the city was opening regression analysis. The more colorful the city is opening the brightness is lowered, the chroma increased slightly, cold colors significantly increased, which also had a very deep relationship with Lynch enclosed proportion, color change of the city trends through the actual scenery could grasp in more detail.

• Clean Technology
• /
• v.20 no.2
• /
• pp.171-178
• /
• 2014

In this study we have examined the health risk factors and analyzing data of laborers working at the welding operation at large-sized casting process. In order to improve the working environment of workplace, an effective ventilation method was proposed after performing CFD (computational fluid dynamics) modeling and measurement of pollutants. As a result of examining the health risk factors of workers, oxidized steel dust is the main pollution source in the company A, welding fume in the companies B and C, and welding fume and oxidized steel dust in the company D. The fume concentration in the workers' breathing zone was $0.05{\sim}4.37mg/m^3$, and the fume concentration in the indoor air at the welding process was $0.13{\sim}7.54mg/m^3$. From a result of CFD, a local exhaust with an exhaust duct adjacent to welding point was found to be most effective in case of the exhaust process. In case of air supply, we found that a desired location of air supply fan would be at the end of the opening. If a standardizing the ventilation system for tunnel-type semi-enclosed space at a large-sized casting process is introduced in welding work places in the future, it would be more effective to protect the health of welding workers working at the casting industry and shipbuilding industry and improve the work environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.1
• /
• pp.98-105
• /
• 2022

It is essential for vertical smart farms that artificially grow crops in an enclosed space to properly utilize air environment facilities to create an appropriate growth environment. However, domestic vertical smart farm companies are creating a growing environment by relying on empirical data rather than systematic methods. Using IoT to create a growing environment based on systematic and precise monitoring can increase crop production yield and maximize profitability. This study aims to construct a monitoring system using IoT and to analyze the cause by demonstrating the imbalance of temperature environment, which is a significant factor in crop cultivation. 1) The horizontal temperature distribution of the multi-layer shelf was measured with different operating methods of LED and air conditioner. As a result, there was a temperature difference of "up to 1.7℃" between the sensors. 2) As a result of measuring the vertical temperature distribution, the temperature difference was "up to 6.3℃". In order to reduce this temperature gap, a strategy for proper arrangement and operation of air conditioning equipment is required.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.610-619
• /
• 2022

Hydrogen is emerging as an alternative fuel for eco-friendly ships because it reacts with oxygen to produce electrical energy and only water as a by-product. However, unlike regular fossil fuels, hydrogen has a material with a high risk of explosion due to its low ignition point and high flammability range. In order to safely use hydrogen in ships, it is an essential task to study the flow characteristics of hydrogen leakage and diffusion need to be studied. In this study, a numerical analysis was performed on the effect of leakage, ventilation, etc. on ventilation performance when hydrogen leaks in an enclosed space such as inside a ship. ANSYS CFX ver 18.1, a commercial CFD software, was used for numerical analysis. The leakage rate was changed to 1 q, 2 q, and 3 q at 1 q = 1 g/s, the ventilation rate was changed to 1 Q, 2 Q and 3 Q at 1 Q = 0.91 m/s, and the ventilation method was changed to type I, type II, type III to analyze the ventilation performance was analyzed. As the amount of leakage increased from 1 q to 3 q, the HMF in the storage room was about 2.4 to 3.0 times higher. Furthermore, the amount of ventilation to reduce the risk of explosion should be at least 2 Q, and it was established that type III was the most suitable method for the formation of negative pressure inside the hydrogen tank storage room.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.3
• /
• pp.23-30
• /
• 2022

In this study, in order to grasp the current situation of indoor environmental pollution and indoor ventilation in one-room around the university in the post-corona era, we analyzed the experimental data and conducted a questionnaire survey on university students. By analyzing the content, the effects of formaldehyde, dust and other pollution on the human body, which are usually not easily detectable, are digitized and more easily taken into account. Among the experimental results, the concentration of VOC and HCHO, gas pollutants among indoor pollutants, exceeded the recommended criteria of the Ministry of Environment in most studio apartments. Overall, the average CO₂ concentration was lower than the Ministry of Environment's maintenance standard (1000ppm), but it was relatively high in summer and winter, and it is believed to be caused by cooling and heating in an enclosed space. The levels of PM2.5 and PM10, particulate pollutants, increased in November and December, and it is believed that ventilation defects due to degradation in external temperature. There was no clear difference between the two types, and there was a very high correlation between PM2.5 and PM10, HCHO and VOC. It was found that temperature was closely correlated with all sources except CO₂, and humidity was closely correlated with all sources except PM2.5 and PM10. Health risk assessment was conducted for formaldehyde. The average ECR of studio R2 in May was 3.91E^-4, and the ECR figure in September was 3.65E^-4, which was very high compared to other residential spaces. The R2 level was calculated as 4 people per 10,000 people in the lifetime risk of cancer of residents, exceeding the allowable risk. R8 also showed higher ECR results than other spaces after R2, especially in October, 2.01E^-4, six times higher than R7 measured in October, and 1.87E^-4 in July, four times higher than R9.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.71-80
• /
• 2022

In the past, fish diseases were bacterial in aqua farms, but in recent years, the frequency of fish diseases has increased as they have become viral and mixed. Viral diseases in an enclosed space called a aqua farm have a high spread rate, so it is very likely to lead to mass death. Fast identification of fish diseases is important to prevent group death. However, diagnosis of fish diseases requires a high level of expertise and it is difficult to visually check the condition of fish every time. In order to prevent the spread of the disease, an automatic identification system of diseases or fish is needed. In this paper, in order to improve the performance of the disease identification system of Paralichthys olivaceus based on deep learning, the existing pre-processing method is compared and tested. Target diseases were selected from three most frequent diseases such as Scutica, Vibrio, and Lymphocystis in Paralichthys olivaceus. The RGB, HLS, HSV, LAB, LUV, XYZ, and YCRCV were used as image pre-processing methods. As a result of the experiment, HLS was able to get the best results than using general RGB. It is expected that the fish disease identification system can be advanced by improving the recognition rate of diseases in a simple way.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.5
• /
• pp.37-48
• /
• 2010

In this study, the seepage flow monitoring method by the hydraulic head loss rate was developed for the purpose of application to offshore construction site enclosed by cofferdams in which seepage force varies periodically. The amount of the hydraulic head loss rate newly defined in this graph was in a range between 0 and 1. The zero of the rate means the existence of flow with no seepage resistance. The 1 of the rate means no seepage flow through the ground. The closer to 1 the coefficient of determinant in the hydraulic head loss graph is, the more the ground through which seepage water flows is stable. The closer to 0 the coefficient of determinant in the hydraulic head loss graph is, the more the ground through which seepage water flows was unstable and the higher the possibilities of existence of empty space or of occurrence of piping on the seepage flow pass in the ground is. The hydraulic head loss graph makes it possible to monitor sensitively the situation of seepage flow state, and the graph helps to understand easily the seepage flow state at the specific section on the whole cofferdam.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.108-109
• /
• 2022

In this study analyzed experimental data on noise interference caused by engine operating apply surface wave communication in the engine room. For the experiment, 7 areas of the engine room on 256 ton tug boat and measured noise during engine on off using signal analyzer for effect surface wave communication. In order to construct and actual communication network based on the analysis of the noise and confirm the characteristics of surface wave communication in the area made metal bulkheads the actual communication network installed communication equipment between three metal bulkheads and conducted a comparative experiment with wireless communication. The difference was confirmed. As a result, in the case of surface wave communication, there was no significant difference in the transmission and reception rates before and after engine operation in an environment with three bulkheads, but in the case of Wi-Fi using wireless, the performance deteriorated significantly during operation. was confirmed. As a result of analyzing the experimental data, it was confirmed that noise caused by engine operation affects wireless communication but does not affect surface wave communication. Therefore, even in the area with a lot of electromagnetic wave noise in the ship, when the surface wave communication system is configured using the ship's metal structure, it is possible to replace the wireless communication and furthermore, it is possible to apply the surface wave communication in the enclosed space and the engine room in the ship.