• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.3
• /
• pp.263-270
• /
• 2015

Using Diesel-Water Emulsion fuel in commercial diesel engine can reduce NOx and soot when it is injected through the injector. Because water in Diesel-Water Emulsion fuel is vaporized ahead of diesel particle and it cause decrease of combustion temperature. Furthermore, research about the possibility of applicating Diesel-Water Emulsion fuels to commercial diesel engine is demanded in order to prove that Diesel-Water Emulsion fuel is able to apply commercial diesel engine without any replacement of equipments. This research analyzed applicable possibility of Diesel-Water Emulsion fuels to commercial diesel engine's fuel injection system refering injection and spray characteristics. In this research, there are 3 experiments, that is injection quantity, spray visualization, and injection rate. Diesel-Water Emulsion fuel has less injection quantities compared to diesel fuel, and spray penetration length is more longer than diesel. Furthermore, emulsion fuels have less dispersed than diesel fuel. In conclusion, comparing with diesel fuel with only spray characteristics, Diesel-Water Emulsion fuel has bad effects about dispersion and vaporization.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.128-132
• /
• 2009

Fucoidan, a sulfated polysaccharide derived from brown seaweed, is an important material valued for its various biological functions, including anti-coagulation, anti-aging, and immune system support. In this study, we examined the potential of fucoidan as a novel emulsifying agent in BSA (bovine serum albumin)-stabilized emulsion at a neutral pH. We measured the dispersed oil-droplet size, surface zeta-potential and creaming formation of 0.5 wt% BSA emulsion (20 wt% oil traction) in the absence and presence of fucoidan. The average particle size and zeta-potential value were 625.4 nm and -30.91 mV in only BSA-stabilized emulsion and 745.2 nm and -44.2 mV in 1.0 wt% fucoidan-added BSA emulsion, respectively. This result suggested that some positive charges of the BSA molecules interacted with the negative charges of fucoidan to inhibit the flocculation among the oil droplets. The creaming rate calculated from the backscattering data measured by Turbiscan dramatically decreased in 1.0 wt% fucoidan-added BSA emulsion during storage. Accordingly, the repulsion forces induced among the oil particles coated with 1.0 wt% fucoidan in emulsion solution resulted in significantly increased emulsion stability. The turbidity of the BSA-stabilized emulsion at 500 nm decreased during five days of storage. However, the fucoidan-added BSA emulsion exhibited a higher value of turbidity than the BSA-stabilized emulsion did. In conclusion, an anionic sulfated fucoidan lowered the surface zeta-potential of BSA-coated oil droplets via the electrostatic interaction, and subsequently inhibited the flocculation among the oil droplets, thereby clearly minimizing the creaming and phase separation of the emulsion.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.114-116
• /
• 2008

Poly(${\varepsilon}$-caprolactone) nanocapsules(nanoPCL) containing phytoncide oil were synthesized by emulsion diffusion method using ethyl acetate as organic solvent. The influence of the degree of hydrolyzation of poly(vinyl acohol) used as an emulsion stabilizer, and the different weight ratio of core material to wall material on the particle size, morphology, and emulsion stability was investigated to design nanocapsules. The encapsulated nanoPCL were characterized by FT-IR spetrometry, Scanning electron microscope, Differential scanning calorimetry, and Thermogravimetry analysis, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.96-104
• /
• 1998

It was possible to produce W/O/W one step multiple emulsion on the system which satisfied following conditions. 1. 1-5％ of hydrophilic liquid surfactant over HLB20 and lipophilic liquid surfactant which has HLB 3∼5 2. Non wax copolymers as oil thickener 3. More than 0.5％ of carbomer as aqueous thickener 4. The manufacturing process which neutralize the dispersed carbomer (2.0％ in water), after emulsifying. For the selective addition into inner and outer aqueous phase, we melted the glucose in water before emulsifying. Using an Anthrone analysis method, we analyzed the encapsulation yield of glucose in inner water phase. It was possible to raise the water encapsulation yield of the multiple emulsion through the following conditions. 1. Using of anionic hydrophilic surfactant(HLB 40) and lipophilic surfactant (HLB 3∼5) 2. Controlling the ratio of hydrophilic surfactant and lipophilic surfactant 3. Strengthening interface with increase of non wax oil thickener. When the separated adding process of glucose was adopted, approximately 85％ of glucose was added selectively within inner aqueous phase.

• Analytical Science and Technology
• /
• v.7 no.2
• /
• pp.233-236
• /
• 1994

To evaluate the emulsion stability indices of W/O emulsion system, we developed the simple and sensitive "VOLUMETRIC METHOD". This technique involved the first step of homogenizing the milk fat-water system with Ultra-turrax T25, then the volume of the added water phase was measured immediately. After quiescent incubation in test tubes at room temperature for a desired storage time, the bottom volume of the separated water layer was measured. And then "emulsion stability index(ESI)" was calculated by the following equation : $ESI=(1-V_s/V_a){\times}100$, where $V_a$ means the volume of the added water in the W/O emulsion and $V_s$ represents the volume of the separated water in the W/O emulsion for a desired storage time. The emulsion stability indices of W/O emulsion system at sorbitan trioleate, span 60, and tween 20 were $95.4{\pm}1.8$, $56.1{\pm}2.8$, and $41.6{\pm}2.2$ respectively. Furthermore, the differences between "VOLUMETRIC METHOD" and "Titus et al method" were less than 5.0 of ESI Value.

• Food Science of Animal Resources
• /
• v.36 no.6
• /
• pp.744-751
• /
• 2016

The objective of this study was to investigate the effects of partial beef fat replacement (0, 30, 50, 100%) with gelled emulsion (GE) prepared with olive oil on functional and quality properties of model system meat emulsion (MSME). GE consisted of inulin and gelatin as gelling agent and characteristics of gelled and model system meat emulsions were investigated. GE showed good initial stability against centrifugation forces and thermal stability at different temperatures. GE addition decreased the pH with respect to increase in GE concentration. Addition of GE increased lightness and yellowness but reduced redness compared to control samples. The results of the study showed that partial replacement of beef fat with GE could be used for improving cooking yield without negative effects on water holding capacity and emulsion stability compared to C samples when replacement level is up to 50%. The presence of GE significantly affected textural behaviors of samples (p<0.05). In conclusion, our study showed that GE have promising impacts on developing healthier meat product formulations besides improving technological characteristics.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.29-35
• /
• 2016

RS White (resorcinol bis-ethylhexanoate) is used in cosmetics as a skin whitening agent. In this study, we studied the possibility of nano-emulsion formation containing whitening agent, RS White, with different types of emulsifying agents. With Tween 80, 60, HCO 60 and 40 as a hydrophilic surfactants and Span 80 as ahydrophilic surfactant, nano-emulsions were formed at appropriate concentrations, but they were not formed in the system using the Myrj 52, Montanov L, and Tegocare 450 with Span 80. The diameter of nano-emulsion sphere was smaller than 100 nm. The emulsion showed a translucent appearance and maintained stability in stability evaluation with time. In vitro skin permeation experiments showed that amounts of skin permeated nano-emulsion for 24 h were $70.84{\mu}g/cm^2$ and those of O/W emulsion were $28.97{\mu}g/cm^2$. In conclusion, a stable nano-emulsion containing the resorcinol bis-ethylhexanoate is effective for potential efficacy system as an efficient delivery system of the functional materials into skin.

• KSBB Journal
• /
• v.27 no.4
• /
• pp.207-214
• /
• 2012

Emulsions are mixture of immiscible liquids in which one is dispersed in all over the other. They have been applied to many applications including cosmetics, foods, drug delivery system (DDS), fine chemicals, and chemical separations. Especially, emulsion technology is one of the most useful technique to formulate cosmetics such as eye cream, foundation, and foam cleansing. In general, the emulsions can be generated by mechanical agitation of two immiscible fluids. However, the emulsions obtained by conventional method have limited in stability, monodispersity, and complicate process. We describe here preparation techniques of representative cosmetic emulsions such as liposome, liquid crystal emulsion, nanoemulsion, multiple emulsion, and pickering emulsion. Furthermore, various factors which can control the physical properties of each cosmetic emulsions are briefly discussed.

• Korean journal of food and cookery science
• /
• v.31 no.3
• /
• pp.241-247
• /
• 2015

This study was conducted in order to evaluate emulsion mapping between emulsion stability and moisture content, cooking yield, hardness, protein solubility, apparent viscosity, and overall acceptability of pork or beef emulsion batters. The pork and beef emulsion batters were added to different parts of the meat. The formulations indicating low emulsion stability and high cooking yield were T1 (pork shoulder), T2 (pork ham), and T5 (beef tenderloin) treatments. Low stability, low hardness and protein solubility were also T1 (pork shoulder), T2 (pork ham), and T5 (beef tenderloin) treatments. The Pearson's correlation coefficients show that emulsion stability is negatively correlated with cooking yield (p<0.05), with a value of -0.90, and positively correlated with hardness (p<0.05), and protein solubility (p<0.01) with values of 0.65 and 0.59, respectively. This approach has been found to be particularly useful for highlighting differences among the emulsified properties in emulsion meat products. Therefore, the results obtained with emulsion mapping are useful in the making of new emulsified meat products of the desired quality.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.4
• /
• pp.249-255
• /
• 2009

The main object of this study was to prepare of w/o emulsion including glyceryl monooleate(GMO) and to evaluate its stability by using the recently developed $Turbiscan^{(R)}LAB$. GMO is the polar oily surfactant with the low HLB value, and it forms the gel phase of cubic structures after dissolves in aqueous media. Phosphate buffer solution (PBS) of pH 7.4 was prepared as the water phase and Marcol 52(mineral oil) was used as the oil phase in this study. GMO was used as the surfactant of W/O emulsion. W/O emulsion using GMO alone as a surfactant was very unstable. But the emulsion using both GMO and poloxamer 407 was more stable. The stability of W/O emulsions was evaluated after centrifuging the emulsions. But it was difficult with naked eye because an opaque and concentrated system like W/O emulsion was very turbid. So $Turbiscan^{(R)}LAB$ was used to detect the destabilization phenomena in non-diluted emulsion. As a result, the W/O emulsion using the proper amounts of GMO and poloxamer 407 was more stable among them using GMO of various amounts. But it seems that the other element for the stability of W/O emulsion including GMO was required. Furthermore, the $Turbiscan^{(R)}LAB$ was a very efficient analyzer for evaluating the physical stability of emulsion.