• Journal of the Society of Disaster Information
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2013

The main objective of this research is to develop the Mechanistic-Empirical (M-E) guidelines for evaluating the capacity of existing highways to sustain route overweight truck traffic over a specified performance period due to a growing concern on the impact of increasing overweight truck loads on highways. In this study, a two-stage framework was developed for this purpose. Level I procedure involves the use of pavement evaluation charts to identify the best possible route from among the alternatives considered and to determine what additional tests and analyses are needed as a screening tool. Level II involves the application of the Overweight Truck Route Analysis (OTRA) program to evaluate the structural adequacy of an existing route to carry routine overweight truck traffic over the specified performance period along with estimating asphalt concrete overlay thickness, if necessary.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.7
• /
• pp.35-45
• /
• 2016

Estimation of vertical bearing capacity is critical in the design of bucket foundation used to support offshore structure. Empirical formula and closed form solutions for bucket foundations in uniform sand or clay profiles have been extensively studied. However, the vertical bearing capacity of bucket foundations in alternating layers of sand overlying clay is not well defined. We performed a series of two-dimensional axisymmetric finite element analyses on bucket foundations in sand overlying clay soil, using elasto-plastic soil model. The load transfer mechanism is investigated for various conditions. Performing the parametric study for the friction angles, undrained shear strengths, thickness of sand layer, and aspect ratios of foundation, we present the predictive charts for determining the vertical bearing capacities of bucket foundations in sand overlying clay layer. In addition, after comparing with the finite element analysis results, it is found that linear interpolation between the design charts give acceptable values in these ranges of parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.936-944
• /
• 2006

In order to enhance their own customer satisfaction index that is one of the top level managerial performance indices, Internet communication service providers endeavor onto establishing a total quality management system. Specifically, it is under discussion that some critical Internet communication network quality characteristics closely related to customer satisfaction index should be controlled aiming to this managerial goal. This paper presents an application scheme of I-MR control charts for monitoring Internet communication network quality characteristics. This statistical quality control scheme generates a signal to practitioners when it detects the network quality characteristics out-of control. It is designed based on; 1) individual measurements; and 2) moving ranges between two consecutive individual measurements collected with a constant time interval. Empirical analyses are illustrated to estimate the expected quality improvement ratios that can be realized with the application scheme proposed in this paper. Assuming that the assignable causes can be revealed and eradicated, regarding two Internet communication services A, B, seven network quality characteristics for each service, eleven distinct measuring spots for each network quality characteristic, the expected quality improvement ratios are calculated with which the effect of the application scheme is evaluated. Results show the ranges of the expected quality improvement ratios; 1) Service A, (1) mean (0.31%-11.44%), (2) standard deviation (9.82%-71.10%): 2) Service B, (1) mean (0.29%-17.64%), (2) standard deviation (8.05%-60.59%). Hence, It is anticipated that the I-MR control charts based application scheme can be effective not only to improving the mean and dispersion of the network quality characteristics concerned but also to maintaining the network quality characteristics in-control consequently.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.11
• /
• pp.4549-4553
• /
• 2014

Background: Infection is a serious cause of mortality in febrile neutropenia of pediatric cancer patients. Recently, monotherapy has replaced the combination therapy in empirical treatment of febrile neutropenia. Since there has been no reported trial comparing the efficacy of meropenem and piperacillin-tazobactam (PIP/TAZ) monotherapies, the present retrospective study was conducted to compare safety and efficacy in febrile neutropenic children with cancer. Materials and Methods: Charts of febrile, neutropenic children hospitalized at our center between March 2008 and April 2011 for hemato-oncological malignancies were reviewed. Patients received PIP/TAZ 360 mg/kg/day or meropenem 60 mg/kg/day intravenously in three divided doses. Duration of fever and neutropenia, absolute neutrophil count, modification, and success rate were compared between the two groups. Resolution of fever without antibiotic change was defined as success and resolution of fever with antibiotic change or death of a patient was defined as failure. Modification was defined as changing the empirical antimicrobial agent during a febrile episode. Results: Two hundred eighty four febrile neutropenic episodes were documented in 136 patients with a median age of 5 years. In 198 episodes meropenem and in 86 episodes PIP/TAZ were used. Duration of fever and neutropenia, neutrophil count, sex, and primary disease were not different between two groups. Success rates and modification rate between two groups showed no significant differences (p>0.05). Overall success rate in the meropenem and PIP/TAZ groups were 92.4% and 91.9% respectively. No serious adverse effects occurred in either of the groups. Conclusions: Meropenem and PIP/TAZ monotherapy are equally safe and effective in the initial treatment of febrile neutropenia in children with cancer.

• Smart Structures and Systems
• /
• v.9 no.2
• /
• pp.165-188
• /
• 2012

In the first part of the paper, the optimal design parameters for tuned liquid column dampers (TLCD) in harmonic pitching motion were investigated. The configurations in design tables include uniform and non-uniform TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 for the design in different situations. A closed-form solution of the structural response was used for performing numerical optimization. The results from optimization indicate that the optimal structural response always occurs when the two resonant peaks along the frequency axis are equal. The optimal frequency tuning ratio, optimal head loss coefficient, the corresponding response and other useful quantities are constructed in design tables as a guideline for practitioners. As the value of the head loss coefficient is only available through experiments, in the second part of the paper, the prediction of head loss coefficients in the form of a design chart are proposed based on a series of large scale tests in pitching base motions, aiming to ease the predicament of lacking the information of head loss for those who wishes to make designs without going through experimentation. A large extent of TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 and orifice blocking ratios ranging from 0%, 20%, 40%, 60% to 80% were inspected by means of a closed-form solution under harmonic base motion for identification. For the convenience of practical use, the corresponding empirical formulas for predicting head loss coefficients of TLCDs in relation to the cross-sectional ratio and the orifice blocking ratio were also proposed. For supplemental information to horizontal base motion, the relation of head loss values versus blocking ratios and the corresponding empirical formulas were also presented in the end.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.482-491
• /
• 2009

In this study, the mechanical behavior of very soft ground that is reinforced on the surface has been investigated with the aid of a series of numerical analyses. Key material properties of each dredged soft ground, reinforcement and backfill sand mat have been parametrically estimated in the numerical analysis. Along with the result of the study previously performed, a series of in-situ loading conditions and settlement exerted by surface reinforcing operation by construction vehicles has been numerically simulated. These result have been used to evaluate the limit bearing capacity for the unreinforced and reinforced soft ground. Also, the results of the numerical analysis obtained in this research were compared with Yamanouchi's empirical correlation for the limit bearing capacity. Engineering charts listed in this paper for estimating the limit bearing capacity provide field engineers with preliminary design tool for surface reinforcement of very soft ground.

• Korean Journal of Remote Sensing
• /
• v.20 no.3
• /
• pp.153-162
• /
• 2004

In the summer of 1998-2001, a huge flood occurred in the Yangtze River in the eastern China. Low salinity water less than 28 psu from the river was detected around the southwestern part of the Jeju Island, which is located in the southern part of the Korean Peninsula. We studied how to detect low salinity water from the Yangtze River, that cause a terrible damage to the Korean fisheries. We established a relationships between low salinity at surface, turbid water from the Yangtze River and digital ocean color remotely sensed data of SeaWiFS sensor in the northern East China Sea, in the summer of 1998, 1999, 2000 and 2001. The salinity charts of the northern East China Sea were created by regeneration of the satellite ocean color data using the empirical formula from the relationships between in situ low salinity, in situ measured turbid water with transparency and SeaWiFS ocean color data (normalized water leaving radiance of 490 nm/555 nm).

• Geomechanics and Engineering
• /
• v.34 no.5
• /
• pp.561-575
• /
• 2023

This study investigates to provide a fast solution to the problem of bearing capacity in layered soils with easily obtainable parameters that does not require the use of any charts or calculations of different parameters. Therefore, a hybrid approach including both the finite element (FE) method and machine learning technique have been applied. Firstly, a FE model has been generated which is validated by the results of in-situ loading tests. Then, a total of 192 three-dimensional FE analyses have been performed. A data set has been created utilizing the soil properties, footing sizes, layered conditions used in the FE analyses and the ultimate bearing capacity values obtained from the FE analyses to be used in multigene genetic programming (MGGP). Problem has been modeled with five input and one output parameter to propose a bearing capacity formula. Ultimate bearing capacity values estimated from the proposed formula using data set consisting of 20 data independent of total data set used in MGGP modelling have been compared to the bearing capacities calculated with semi-empirical methods. It was observed that the MGGP method yielded successful results for the problem considered. The proposed formula provides reasonable predictions and efficient enough to be used in practice.

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.227-239
• /
• 2022

This study conducted an exploratory empirical analysis on the factors affecting the performance of digital classical music based on signaling theory. For this purpose, using the classical weekly chart provided by the music platform Genie, 297 digital music sources that entered the top 100 chart from March 2020 to October 2020 (35 weeks). In this study, as signals that can influence consumers' choice to listen to classical nusic, we set an the artist's award history, artist's broadcast content linkage, taking the top spot in the first classical music chart entry, producing companies' competency, and the popularity of classical music repertoire. The effect of these signals on the chart success of digital classical music was verified subsequently. As a result of the verification, it was found that the artist's broadcast content linkage, taking the top spot in the first classical music chart entry, and the popularity of the classical music repertoire indeed had a positive effect on the chart success of a classical music. On the other hand, the artist's award history and the producing companies' competence did not significantly affect the chart success of digital classical music. This study is the first empirical study on the success factors of digital classical music performed from a business perspective, and is expected to contribute to subsequent studies related to classical music.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.1
• /
• pp.189-210
• /
• 2011

This study aims to explore how users are tagging in order to utilize a folksonomy and whether they understand the social and interactive aspects of tagging in three different folksonomic systems, Connotea (www.connotea.org), Delicious(http://delicious.com), and CiteULike(www.citeulike.org). The study uses internet questionnaires, qualitative diary studies, and follow-up interviews to understand twelve participants' tagging activities associated with folksonomic interactions. The flow charts developed from the twelve participants showed that tagging was a quite complex process, in which each tagging activity was interconnected, and a variety of folksonomic system features were employed. Three main tagging activities involved in the tagging processes have been identified: item selection, tag assignment, and tag searching and discovery. During the tag assignment, participants would describe their tagging motivations related to various types of tags. Their perception of the usefulness of types of tags was different when their purpose was for social sharing rather than personal information management. While tagging, participants recognized the social potential of a folksonomic system and used interactive aspects of tagging via various features of the folksonomic system. It is hoped that this empirical study will provide insight into theoretical and practical issues regarding users' perceptions and use of folksonomy in accessing, sharing, and navigating internet resources.