• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.1
• /
• pp.93-102
• /
• 2000

Processors for a base station controller such as call control processor have to serve usersdemand. Some of processors have been still used for the processing of call and 0&M (operation and maintenance) management by adopting embedded board type. This type can not provide users with a wide variety of environments for testing and debugging. User environments are regarded as a primary system factor in most systems and this is particularly so in designing and implementing the processor for base station controller in mobile communication systems. We describe the design and implementation of new user environment tool named QUEST for the next generation mobile communication system, IMT-2000. The simulation results of performance evaluations demonstrate that our system performs well for a base station controller without performance degradation.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.374-385
• /
• 2019

This paper presents an optimal implementation of a Daubechies-based pipelined discrete wavelet packet transform (DWPT) processor using finite impulse response (FIR) filter banks. The feed-forward pipelined (FFP) architecture is exploited for implementation of the DWPT on the field-programmable gate array (FPGA). The proposed DWPT is based on an efficient transpose form structure, thereby reducing its computational complexity by half of the system. Moreover, the efficiency of the design is further improved by using a canonical-signed digit-based binary expression (CSDBE) and advanced functional sharing (AFS) methods. In this work, the AFS technique is proposed to optimize the convolution of FIR filter banks for DWPT decomposition, which reduces the hardware resource utilization by not requiring any embedded digital signal processing (DSP) blocks. The proposed AFS and CSDBE-based DWPT system is embedded on the Virtex-7 FPGA board for testing. The proposed design is implemented as an intellectual property (IP) logic core that can easily be integrated into DSP systems for sub-band analysis. The achieved results conclude that the proposed method is very efficient in improving hardware resource utilization while maintaining accuracy of the result of DWPT.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.3
• /
• pp.125-132
• /
• 2023

Roundabouts have strengths in traffic flow and safety but can present difficulties for inexperienced drivers. Demand to acquire and analyze drone images has increased to enhance a traffic environment allowing drivers to deal with roundabouts easily. In this paper, we propose a roundabout traffic analysis system that detects, tracks, and analyzes vehicles using a deep learning-based object detection model (YOLOv7) in drone images. About 3600 images for object detection model learning and testing were extracted and labeled from 1 hour of drone video. Through training diverse conditions and evaluating the performance of object detection models, we achieved an average precision (AP) of up to 97.2%. In addition, we utilized SORT (Simple Online and Realtime Tracking) and OC-SORT (Observation-Centric SORT), a real-time object tracking algorithm, which resulted in an average MOTA (Multiple Object Tracking Accuracy) of up to 89.2%. By implementing a method for measuring roundabout entry speed, we achieved an accuracy of 94.5%.

• Journal of KIISE
• /
• v.43 no.6
• /
• pp.692-699
• /
• 2016

C compilers for 8-bit MCUs used in washing machines and refrigerators often do not follow the C standard to improve runtime performance. Developers who are unaware of the difference between C compilers following the C standard and the C compilers for 8-bit MCU can cause bugs that do not appear in the standard C environment but appear in the embedded systems using 8-bit MCUs. It is difficult for bug detectors that assume the standard C environment to detect such bugs. In this paper, we introduce integer promotion bugs caused by the different integer promotion rules of the C compilers for 8-bit MCU from the C standard and propose 5 bug patterns where the integer promotion bugs occur. We have developed an integer promotion bug detection tool and applied it to the washing machine control software developed by the LG electronics. The integer promotion bug detection tool successfully detected 27 integer promotion bugs in the washing machine control software.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.6
• /
• pp.201-214
• /
• 2014

In this paper, we propose a test case generation method adequate to destructive test of the BLDC(Brush Less Direct Current) motor controller used for the MDPS(Motor Driven Power Steering) system embedded in an automobile. The proposed method is a modified CTM(Classification Tree Method). CTM generates test cases assuming that all inputs are equally important. Therefore, it is very hard to generate test cases for extreme situations. To overcome the drawback and generate test cases specialized for destructive test. a modified CTM that compensates the limitation of traditional CTM is proposed. The proposed method has an advantage that it can intensively generate the test scenarios adequate to extreme situations by combining the test cases generated by the transitional CTM the while keeping the merit of the traditional CTM. The test scenarios for destructive test for the MDPS system embedded in a commercial automobile are generated utilizing the proposed method. The effectiveness of the proposed algorithm is verified through the test.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.866-873
• /
• 2017

We propose a multilayered-substrate-based power semiconductor discrete device package for a low switching loss and high heat dissipation. To verify the proposed package, cost-effective, low-temperature co-fired ceramic, multilayered substrates are used. A bare die is attached to an embedded cavity of the multilayered substrate. Because the height of the pad on the top plane of the die and the signal line on the substrate are the same, the length of the bond wires can be shortened. A large number of thermal vias with a high thermal conductivity are embedded in the multilayered substrate to increase the heat dissipation rate of the package. The packaged silicon carbide Schottky barrier diode satisfies the reliability testing of a high-temperature storage life and temperature humidity bias. At $175^{\circ}C$, the forward current is 7 A at a forward voltage of 1.13 V, and the reverse leakage current is below 100 lA up to a reverse voltage of 980 V. The measured maximum reverse current ($I_{RM}$), reverse recovery time ($T_{rr}$), and reverse recovery charge ($Q_{rr}$) are 2.4 A, 16.6 ns, and 19.92 nC, respectively, at a reverse voltage of 300 V and di/dt equal to $300A/{\mu}s$.

• Journal of the Korea Concrete Institute
• /
• v.23 no.3
• /
• pp.385-392
• /
• 2011

In this study, experimental research was carried out to evaluate and improve the seismic performance of reinforced concrete beam-column joint regions using strengthening materials (steel plate, carbon fiber sheet, and embedded carbon fiber rod) in existing reinforced concrete buildings. Six specimens of retrofitted beam-column joints are constructed using various retrofitting materials and tested for their retrofit performances. Specimens designed by retrofitting the beam-column joint regions (LBCJ series) of existing reinforced concrete building showed a stable mode of failure and an increase in load-carrying capacity due to the effect of crack control at the time of initial loading and confinement from retrofitting materials during testing. Specimens of LBCJ series, designed by the retrofitting of FRP in reinforecd beam-column joint regions increased its maximum load carrying capacity by 26~50% and its energy dissipation capacity by 13.0~14.4% when compared to standard specimen of LBCJC with a displacement ductility of 4.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.123-128
• /
• 2004

Recent advancement in RF technology and wireless communications has enabled the development of noble networks. Bluetooth that can be used in various application field is a kind of WPAN(Wireless Personal Area Network) standard that is widely known. Bluetooth enables voice and data applications to operate simultaneously. Various applications have been implemented based on standard Profiles. In this paper, we describes the development of Biuetooth network AP(Access Point) system for network connection of Bluetooth devices. Unlike headset, mouse, and keyboard, the access point should have capability to support multiple connection and stabilized network throughput. We have designed and developed the hardware system, core stack and profiles on embedded system to comply with standard specification. Our system showed compatibility and good protocol performance through testing with lots of products that is available in market.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.3
• /
• pp.273-278
• /
• 2004

In this paper, the recurrent neural networks (RNN) is applied to compensate for HMM recognition algorithm, which is commonly used as main recognizer. Among these recurrent neural networks, the multi-layer recurrent neural prediction model (MRNPM), which allows operating in real-time, is used to implement learning and recognition, and HMM and MRNPM are used to design a hybrid-type main recognizer. After testing the designed speech recognition algorithm with Korean number pronunciations (13 words), which are hardly distinct, for its speech-independent recognition ratio, about 5% improvement was obtained comparing with existing HMM recognizers. Based on this result, only optimal (recognition) codes were extracted in the actual DSP (TMS320C6711) environment, and the embedded speech recognition system was implemented. Similarly, the implementation result of the embedded system showed more improved recognition system implementation than existing solid HMM recognition systems.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.271-281
• /
• 2009

In this paper, we propose the enhanced Assessment Model of the Embedded Software Process(MND-ESPAM) which is suitable for the development work of weapons in Korea. In 2008. We developed the MND-ESPAM which is the assessment criteria of software process, but this model is inefficient to apply to Korean military area. Therefore, we elicit and analyze the problems of MND-ESPAM through tow methods. One is to research on the actual condition of the domestic defense industry about software process management. And the other is to apply MND-ESPAM to the defense companies acquiring CMMI level. In order to overcome these problems elicited above, we provide solutions to make MND-ESPAM linked with Software Development Process Guide of Defense Acquisition Program Administration(DAPA) and to systematically strengthen testing activities and to reduce the number of process areas. The proposed model was proved by two objective methods such as checking the coverage with CMMI and whether it is satisfied or not by modified requirements ISO/IEC 14598-3. At last, experts in the field of software process confirmed the effect of MND-ESPAM through applying MND-ESPAM to the defense industry company.