• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.73-76
• /
• 1997

The temperature control system for semiconductor test handler is designed. We controlled the temperature of chamber using 3-wire RTD sensor and MVME EMbedded controller. VxWorks that is a real-time operating system is used and heater is controlled by PWM. Temperature fluctuation of chamber is decreased within 0.3.deg. C, which is about one-half of that of commercial controller.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2005년도 추계학술대회 학술발표 논문집 제15권 제2호
• /
• pp.147-150
• /
• 2005

센서 네트워크 노드는 각각 초저전력, 초소형, 저비용을 지향하는데 이러한 하드웨어 리소스를 사용하는 임베디드 OS가 TinyOS이다. TinyDB는 이러한 TinyOS 센서 네트워크로부터 정보를 추출하기 위한 쿼리 프로세싱 시스템이다. 이러한 TinyDB를 활용해서 X-Scale 기반의 임베디드 리눅스 환경에서 네트워크를 통한 Host서버와의 연계에 관한 설계 및 구현을 연구하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.83.1-83
• /
• 2001

This paper presents a three-fingered robot hand, called the KIST hand, Which have one active joint and one passive joint. The thumb is fixed on the palm, and the index and the middle take lateral motions symmetrically. A mechanical clutch and an embedded force sensor, attached on the distal link of the fingers, enable the KIST hand to perform human-like functions. A result of experiment shows reliable grasping performance of the hand which maintain stable grasp under disturbances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.47-48
• /
• 2008

UML(Unified Modeling Language) is the most frequently used modeling language in the process of analysis, design, implementation and etc. The main reason of using UML is not only to help users to work visually but also to draw better communication among developers. In addition, UML is one of the global standards and supports MDA. In this paper embedded software development method for USN using UML is discussed To show how the development method is used, IEEE 802.15.4 radio module are programmed using UML software tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1409-1412
• /
• 2005

Therefore this study focused on developing real-time system, which makes it possible for nurses to check the residual quantity and changing time of Ringer's solution in nurses' room. Load Cell is utilized as a sensor to check the residual quantity of Ringer's solution. This Load Cell detects the physical changes of Ringer's solution and transfers electronic signal to the amplifier. Amplified analog signal is converted into digital signal by A/D converter. Developed Embedded system, which computes these data with microprocess(8052) then makes it possible to monitor the residual quantity of Ringer's solution real-time on a server computer. A Checking system on Residual Quantity of Ringer's Solution Using Load cell cut costs using a simple design for a circuit

• 제어로봇시스템학회논문지
• /
• 제13권2호
• /
• pp.101-107
• /
• 2007

A coaxial rotor flying robot is developed for surveying and reconnoitering various circumstances under calamity environment. The robot has two contrarotating rotors on a common axis, an embedded microcontroller, an IMU(Inertial Measurement Unit), an IR sensor for height control, a micro camera for surveillance, ultrasonic position sensors and wireless communication devices. A bell-bar mounted on the top of the upper rotor hub increases stability and improves flight performance. In this paper, we present a dynamic model of a coaxial rotor flying robot and design an embedded controller far the robot, and implement them to control the developed flying robot. Experimental results show that the proposed controller is valid for autonomous hovering and position control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1383-1384
• /
• 2015

In this paper, a dynamics model embedded navigation filter is newly suggested for underwater autonomous systems without position or attitude aid. In order to ensure the observability on the INS errors, the hydrodynamics of the underwater vehicle is incorporated with the INS attitude error. This approach allows us to estimate and compensate the INS errors in spite of using external velocity sensor. Through the simulation, the performance and effectiveness of the proposed scheme are demonstrated.

• 대한임베디드공학회논문지
• /
• 제9권3호
• /
• pp.165-171
• /
• 2014

In this paper, we propose the hardware and software of a test-bed of a hovering AUV (autonomous underwater vehicle). Test-bed to develop as the underwater robot for the hovering -type is planning to apply for marine resource development and exploration for deep sea. The RTU that controls a azimuth thruster and a vertical thruster of test-bed is a intergrated-type thruster. The main control unit that collects sensor's data and performs high-speed processing and controls a movement of test-bed is a underwater hybrid navigation system. Also it transfers position, posture, state information of test-bed to the host PC of user using a wireless communication. The host PC checks a test-bed in real time by using a realtime monitoring system that is implemented by LabVIEW.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.293-300
• /
• 2019

In this paper, an Embedded solution for fast navigation and precise positioning of mobile robots by floor features is introduced. Most of navigation systems tend to require high-performance computing unit and high quality sensor data. They can produce high accuracy navigation systems but have limited application due to their high cost. The introduced navigation system is designed to be a low cost solution for a wide range of applications such as toys, mobile service robots and education. The key design idea of the system is a simple localization approach using line features of the floor and delayed localization strategy using topological map. It differs from typical navigation approaches which usually use Simultaneous Localization and Mapping (SLAM) technique with high latency localization. This navigation system is implemented on single board Raspberry Pi B+ computer which has 1.4 GHz processor and Redone mobile robot which has maximum speed of 1.1 m/s.

• 한국인터넷방송통신학회논문지
• /
• 제10권1호
• /
• pp.69-74
• /
• 2010

현재 CAN(controller Area Network)통신은 노이즈에 강인한 시리얼통신으로 전자모듈에 많이 사용하고 있다. 특히, CAN통신은 자동차 전자제어모듈, 엔진제어유닛, 센서모듈 등 자동차 부분에 많이 사용되는 방식 이지만 CAN 통신의 연결노드 우선순위와 오류가 낮아 공장자동화 라인에도 적용되고 있다. CAN통신은 기본적으로 전기 노이즈에 강인하여 적용가능한 분야가 다양하다고 사료된다. 본 연구에서는 High-Speed, Full-CAN에서 2개의 CAN Node를 사용하여 임베디드 시스템용으로 오류 검출이 가능한 CAN통신 인터페이스를 설계 하였다.