• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.635-643
• /
• 2007

In this paper, a decision-directed expectation maximization (DEM) algorithm is proposed to improve the performance of channel estimation in OFDM-based cellular systems. The DEM algorithm enables a mobile station (MS) with multiple antennas, located at the cell boundary, to increase the performance of channel estimation using transmit data, without decreasing spectral efficiency. Also, DEM algorithm can apply fast fading without loss of channel estimation performance because that includes channel variation factor in a group. It is verified by computer simulation that the DEM algorithm can reduce computational complexity significantly while improving the performance of channel estimation in fast fading channels, compared with the expectation maximization (EM) algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.47-52
• /
• 2014

A simple RC circuit model of large-scale touch screen panels is developed and the frequency range of the RC model is analyzed. 2D EM simulation results of a single touch cell are cascaded for a 23 inch touch panel using a circuit simulator, and the shortest and longest channels of the full panel are modeled with a 5-element RC circuit. The 5-element RC circuit can model the touch screen panel upto 130 kHz with the channel phase error of $10^{\circ}$. 7-element RC circuit model is also proposed and the frequency range for the channel phase error of $10^{\circ}$ is extended to 200 kHz.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.241-250
• /
• 2010

Over the past few decades, several studies have been made on the modeling of circular data. But these studies focused mainly on the symmetrical cases including von Mises distribution. Recently, many studies with skew-normal distribution have been conducted in the linear case. In this paper, we dealt the problem of fitting of non-symmetrical circular data with wrapped skew-normal distribution which can be derived by using the principle of wrapping. Wrapped skew-normal distribution is very flexible to asymmetical data as well as to symmetrical data. Multi-modal data are also fitted by using the mixture of wrapped skew-normal distributions. To estimate the parameters of mixture, we suggested the EM algorithm. Finally we verified the accuracy of the suggested algorithm through simulation studies. Application with real data is also considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3227-3234
• /
• 1996

This paper proposes a new absorbing boundary condition(ABC) for the FDTD simulation of waveguide problems. It is based on the exact analytic expression for the time domain EM wave propatation in the waveguide. The ABC derived from the expression has a convolution form whose kernel (the discrete Green's function) has a simple, closed form formula. Also, it is applicable to the wide variety of waveguide types with conducting boundaries and complex cross-sectional shapes.

• Journal of the Korea Society for Simulation
• /
• v.9 no.1
• /
• pp.83-91
• /
• 2000

Vehicle simulators provide an effective and safe environment for training operators. Many vehicle simulators have been developed but only a few have reached the stage of widely available tools; these tools are usually expensive and run on workstations only We have developed a low-cost, PC-based excavator simulator for training operators. Currently the simulator is dedicated to operating the boom, Em, bucket, and driver's cabin for digging by the action of the operator on two joysticks. This paper presents the implementation of the excavator simulator and some implementation results.

• Science of Emotion and Sensibility
• /
• v.16 no.2
• /
• pp.235-248
• /
• 2013

In this study, the effects of driver's neuroticism on situation awareness(SA), eye movement(EM), and driving performance were examined. In Experiment 1, in which static driving scenes were presented, it was found that the drivers of higher neuroticism showed shorter percentage of dwell time and less percentage of fixation counts for the peripheral area than those of lower neuroticism, although SA scores yielded no difference between the two neuroticism groups. In Experiment 2, differences in the drivers' driving performances as well as SA and EM as a function of neuroticism were compared using driving simulation. The results of Experiment 2 showed the followings. First, contrasting to Experiment 1, the high neuroticism group showed lower SA score than low neuroticism group. Second, the pattern of EM was similar to those of Experiment 1. Third, high neuroticism group deviated more from center of road, and drove slower than low neuroticism group.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.436-447
• /
• 2013

In this paper, Integrated circuit(IC) electromagnetic(EM) conducted immunity measurement and simulation using bulk current injection(BCI) and direct power injection(DPI) methods were conducted for 1.8 V I/O buffers. Using the equivalent circuit models developed for IC electromagnetic conducted immunity tests, we investigated the reliability of the frequency region where IC electromagnetic conducted immunity test is performed. The insertion loss for the noise injection path obtained from the simulation indicates that using only one conducted immunity test method cannot provide reliable conducted immunity test for broadband noise. Based on the forward power results, we analyzed the actual amount of EM noise injected to IC. We propose a more reliable immunity test methods for broad band noise.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.766-772
• /
• 2018

A 6~10 GHz wide-band power amplifier was designed using an InGaAs enhancement-mode(E-mode) $0.15{\mu}m$ pseudomorphic high-electron-mobility transistor(pHEMT). The positive gate bias of the E-mode pHEMT device removes the need for complex negative voltage generation circuits, therefore reducing the module size. The wire bond and substrate loss parameters were modeled and extracted using a three-dimensional electromagnetic(3D EM) simulation. For wideband characteristics, lossy matching was adopted and the gate bias was optimized for maximum power and efficiency. The measured gain, in/output return loss, output power, and power-added efficiency were greater than 20 dB, 8 dB, 27 dBm, and 35 %, respectively, in the 6~10 GHz band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1104-1114
• /
• 2008

In the output of a mixer, spurious appears with the desired signal, and a filter is necessary to suppress the spurious. In this paper, the planar filter for Ka-band frequency synthesizer was designed and fabricated. In this procedure, the frequency response becomes asymmetric because of discontinuities at the high frequency. Using this, we designed short-end PCLF by using a individual resonator tuning method. The fabricated 5th-order Ka-band pass filter is compared with the result of EM simulation through measurement. The performance agrees with the simulation. Finally spurious suppression was examined through the measurement of output spectrum of the mixer with the filter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1505-1510
• /
• 2014

High-Pass (ETC ; Electronic Toll Collection) system is one of the basic elements, which adopts a wireless communication method using 5.8 GHz and can realize a part of ITS (Intelligent Traffic System). On the other hand, communication errors occur frequently in Hi-Pass system due to signal erros, multi-path reflection, and/or system-to-system interferences. To solve these problems, an EM (Electro-Magnetic) wave absorber can be used. To solve these Problems, we fabricated some samples in the different composition ratios of Carbon, Sendust, and CPE, and it was confirmed that the optimum composition ratio of Carbon : Sendust : CPE is 10 : 40 : 50 wt.%. The complex relative permittivity and complex relative permeability were derived by using the measured data. In addition, the optimum design parameters for the absorber were determined by simulation. Then the absorption abilities were calculated by changing the thickness of the EM wave absorbers. As a result, the optimum thickness of the developed EM wave absorber was 2.85 mm with absorption ability over 22.4 dB at 5.8 GHz. Futhermore, the EM wave absorber was fabricated based on the simulated and designed values. The measured values agreed well with the simulated ones. Therefore, it was clearly shown that the developed EM wave absorber in this paper is to be applied in actual situations.