• The Korean Journal of Ecology
• /
• v.8 no.2
• /
• pp.99-107
• /
• 1985

Photosynthetically Active Radiation (PAR) affects the growth of plants as well as their photosynthetic rates. A mathematical model for intercepted solar radiation on the tilted leaf with any azimuth angle was established and the leaf orientation in which receives the maximum solar radiation was determined each month, during the growing season, and for an year. PAR was maximized at the leaf elevation of 50。~60。 in the winter, at that of 20。~40。. On the whole the leaves of tilt angle 0。~40。 received much radiation comparing with those of other tilt angles. The theoretical tendencies were compared with the distribution of leaf orientation measused practically. The average leaf elevation of maple tree was 17.0。$\pm$12.0。, and that of ginkgo was 29.8。$\pm$16.0。. Several results from other literatures support our suggestion that cumulative effevct of the relationships between surface normal vector and a vector pointing in the direction of the radiation determine the leaf orientation.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.703-705
• /
• 1999

In this paper, we introduce the direction of arrival(DOA) estimation of distributed signal based on the improved ESPRIT algorithm. Most research on the estimation of DOA has been performed based on the assumption that the signal sources are point sources. However, we consider a two-dimensional distributed signal source model using improved ESPRIT algorithm. In the distributed signal source model, a source is represented by two parameters, the azimuth angle and elevation angle. We address the estimation of the elevation and azimuth angles of distributed sources based on the parametric source modeling in the three-dimensional space with two uniform linear arrays. The array output vector is obtained by integrating a steering vector over all direction of arrival with the weighting of a distributed source density function. We also develop an efficient estimation procedures that can reduce the computational complexity. Some examples are shown to demonstrate explicity the estimation procedures under the distributed signal source model.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.64-72
• /
• 1995

In this paper, atmospheric turbulence and absorption under clear weather condition, which affect the optical satellite up-link communication between geo-satellites and earth station, were studied. In case of the up-link communication, the received optical power is weakened by pointing loss caused by beam tilt which is the main effect of turbulent atmosphere. This pointing loss directly has relation to the diameter of optical transmitting antenna. From the inverse proportion of the pointing and spaced loss, it is the regions where the diameter of transmitting antenna increases abruptly and the efficient design of transmitting antenna is impossible. In case of using channel coding, it was shown that the peak value of diameter moved to the lower regions of elevation angle with increasing the coding gain and its width was also decreased. In case of considering both coding gain and transmission rate on the design of transmitting antenna, it was known that more coding gain was necessary as transmission rate was increased.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.512-514
• /
• 2007

Even though official G/T for KOMPSAT-2 X-Band downlink acquisition was 32dB/K, KARI performed the data acquisition experiment using 2Am X-Band antenna to check if popular 2Am MODIS receiving antenna can receive KOMPSAT-2 MSC data within acceptable quality level. Through several acquisition tests, it was shown that G/T value of 24dB/K can provide the reliable data BER quality, 10-6 for the above the elevation angle of 10 degree. Some plots for Eb/No versus elevation angle are provided.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2171-2175
• /
• 2002

Helicopter dynamics are plenty of nonlinearity. A complete mathematical model including propeller dynamics and fortes generated by the propellers is very difficult to obtain. So the method used to design to design a controller is a parameter estimation. Design controller based on variable structure system. This paper deals with LQR control technique to control efficiently, its elevation angle and azimuth one. The purpose of the experiment is to design a controller allows to use a desired elevation angle and azimuth ones. The system model has a helicopter model with 2-degree-of freedom. The simulation results were verified usefulness of controller.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.93-101
• /
• 2000

In this paper, propagation characteristics are analyzed under the Korean propagation condition based on the measurements for Ka-band beacon signal of COMET satellite which moves in non-geostationary orbit. Radio propagation characteristics varying as time, range, and elevation angle are presented also. As results, it is concluded that free space loss is a major parameter to the radio propagation characteristics varying as a range in clear sky. In addition, the effect of elevation angle is negligible because COMETS is observed above 40 degree.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.182-182
• /
• 2003

Generally, DEM (Digital Elevation Model) is generated by stereo-images acquired same conditions, sensor type, viewing angle, capturing elevation and etc. It is difficult to generate DEM with stereo images acquired different satellite. This study intends that it is DEM generation using pair-images with other sensor systems.

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.335-340
• /
• 2010

This paper is about a projection method to check existence of radius groove penetration of screw after distal radius fracture operation using the T-type plate. Angle of Radius groove was analyzed by fifty one CT images that contains patients' wrist and twenty cases of radius specimens. After making radius phantom by plaster, we set the screw so that it penetrated 2.4 mm depth of radius groove. Then, we projected the phantom by X-ray in change of the elevation and supination angle of distal radius by 5 degree interval on 0~30 degree. The average value of groove angle in the wrist CT images was 14.4 degree and the radius specimens was 16.3 degree. Screws penetrating radius groove of the phantom have different lengths according to elevation angle and supination angle. Consequently, in order to confirm existence and nonexistence of radius groove penetration of the screw in tangential projection after distal radius fracture operation using the T-type plate, we recommend 5 degree of elevation angle and 20 degree of supination angle.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.66-76
• /
• 2005

In this study, star visibility analysis of a star tracker is performed by using a statistical apprach. The probability of the Sun and the Earth proximity, the solar array masking probability, and the solar array blinding probability by the Sun light are obtained from the arbitrary chosen satellite positions as a function of a line of sight vector of the star tracker in several satellite attitude modes. This analysis demonstrates that the optimized star tracker accomodations can be determined to be an elevation angle -40o and two azimuth angles $-35^{circ}$ and $-150^{circ}$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.1
• /
• pp.52-58
• /
• 2020

In this paper, a 2-dimensional phase comparison direction finding receiver was designed and fabricated. For 2-D comparison direction finding, direction finding formulas were derived from a uniformly arranged of four antennas. Based on this, a direction finding receiver was designed using Matlab simulink, and the direction finding receiver was fabricated. To analyze the performance of the designed direction finding receiver, the injection direction finding accuracy and simulation results were compared. As a result of the test, the fabricated direction finding receiver showed a maximum of 3° RMS precision, and the result of both tests showed similar trends. Also, it was confirmed that the direction finding accuracy of elevation angle is about 2.7 times better than azimuth angle, and both models performed well within 0.7° RMS at the boresight.