• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.363-375
• /
• 1998

The stiffness matrix of a two-dimensional contact surface element is deduced from the principle of virtual work. The incremental loading procedure used is controlled by displacement and stress. Special potential contact elements are used to avoid the need to rearrange the FEM mesh due to variations of the contact surface as contact develops. Published results are used to validate the method, which is then applied to a turbine to solve the contact problem between the blade root and rotor in the region in which a 'push fit' connects the blade to its rotor.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.117-124
• /
• 1993

This study is concerned with an application of the boundary element method on the crack problem. The stable and efficient analysis method of two dimensional elastostatic stress intensity factor on the mode I deformations is established from the result o stress analysis for the center cracked plates. In order to precisely analyse, The subelements of quadratic element, singular elements on the crack tip and interface and division into regions are applied to elastic stress. The usefulness of the method has been tested with a center cracked plates, a double edge cracked plate and a single edge cracked plate, and the results have turned out to be fairly satisfactory.

• Smart Structures and Systems
• /
• 제5권5호
• /
• pp.587-590
• /
• 2009

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.74-80
• /
• 2008

A finite element modeling approach has been described for the simulation and analysis of the micron-scaled solid particle impact behavior in kinetic spraying process, using an explicit code (ABAQUS 6.7-2). High-strain-rate plastic deformation and interface bonding features of the copper, nickel, aluminum, and titanium were investigated via FEM in conjunction with the Johnson-Cook plasticity model. Different aspects of adiabatic shear instabilities of the materials were characterized as a concept of thermal boost-up zone (TBZ), and also discussed based upon energy balance concept with respect to relative recovery energy (RRE) for the purpose of optimizing the bonding process.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.65-72
• /
• 2013

This paper describes a finite element analysis (FEA) of the body frame of a subsea robot, Crabster200 (CR200). CR200 has six legs for mobility instead of screw type propellers, which distinguishes it from previous underwater robots such as remotely operated vehicles (ROVs) and autonomous underwater vehicles (AUVs). Another distinguishing characteristic is the body frame, which is made of carbon fiber reinforced plastic (CFRP). This body frame is designed as a rib cage structure in order to disperse the applied external loads and reduce the weight. The frame should be strong enough to support many devices for exploration and operation underwater. For a reasonable FEA, we carried out specimen tests. Using the obtained material properties, we performed a modal analysis and FEA for CR200 with a ready posture. Finally, this paper presents the FEA results for the CFRP body frame and the compares the characteristics of CFRP with conventional material, aluminum.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1078-1088
• /
• 2012

Recently, the vibration and structure-borne noise induced by passing trains are of great concerns, and the floating slab track is highlighted as one of most efficient alternatives to reduce the railway vibration. However, due to the non-linearity and viscosity of rubber spring used in the floating slab track, its dynamic behavior is very complex. In this study, therefore, to simulate the dynamic behavior of floating slab track with a better accuracy, a nonlinear viscoelastic rubber spring model that can be incorporated in commercial finite element analysis codes has been proposed. This model is composed of a combination of elastic spring element, friction element and viscous element, and termed the "generalized friction viscoelastic model(GFVM)". Also, in this study, the method to determine the model parameters of GFVM based on Berg's 5-parameter model was presented. The results of the finite element analysis with this rubber spring model exhibit very good correlation with the test results of a laboratory mock-up test, and the feasibility of GFVM has been verified.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.353-356
• /
• 2001

This paper proposes an efficient method for 3-dimensional capacitance extraction based on Finite Element Method(FEM). This method expands the conventional FEM by adopting variable division. This method improves the extraction efficiency 2 to 100 times and even the accuracy 1% to 3% when compared to the conventional FEM with equal division. The Proposed method can be used efficiency to extract electrical parameters of on/off-chip interconnects in VLSI systems.

• Journal of applied mathematics & informatics
• /
• 제24권1_2호
• /
• pp.191-207
• /
• 2007

Based on a mixed Galerkin approximation, we construct the fully discrete approximations of $U_y$ as well as U to a single-phase quasilinear Stefan problem with a forcing term in non-divergence form. We prove the optimal convergence of approximation to the solution {U, S} and the superconvergence of approximation to $U_y$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.289-290
• /
• 2006

With increasing the volume of digital multimedia market, the security and multimedia content protection issues are arising. Interest in H.264/AVC is emerging and special features in H.264/AVC element stream must be considered. We developed a new algorithm which scrambles and descrambles H.264/AVC element stream in compressed domain using manipulating CABAC initialization table and DCT coefficients. Extensive experimental results indicate that the proposed algorithm is effective and promising.

• 한국전자파학회논문지
• /
• 제11권6호
• /
• pp.946-951
• /
• 2000

본 논문은 접지면에 형성된 디펙트를 갖는 전송선로 구조인 DGS의 특성 및 등가회로를 구하고 디펙트의 크기에 따른 등가 집중소자 값을 추출하였으며, DGS에 집중소자를 달아주어 그 영향을 살펴보았다. 제시된 DGS는 아령 모양의 디펙트로 아였으며, 병렬 단락 공진기에 적용하였다. 침 형태의 집중소자인 저항, 인덕터, 커패시터를 각각 달아주어 주파수 특성을 살펴보았다. 또한 실험결과 Q factor와 공진 주파수가 DGS에 달아준 외부소자에 의해 제어됨을 보였다.