• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.91-95
• /
• 2005

A heat dissipation modeling method of EEE parts is developed for thermal design and analysis of an satellite electronic equipment. The power consumption measurement value of each functional breadboard is used for the heat dissipation modeling method. For the purpose of conduction heat transfer modeling of EEE parts, surface heat model using very thin ignorable thermal plates is developed instead of conventional lumped capacity nodes. The thermal plates are projected to the printed circuit board and can be modeled and modified easily by numerically preprocessing programs according to design changes. These modeling methods are applied to the thermal design and analysis of CTU and verified by thermal cycling and vacuum tests.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.170-174
• /
• 2005

The purpose of this study is to design the digital surge counter for lightning arresters. The used detecting method for surges is using the signal of both ends of ZnO varistor. The electronic detecting parts of the digital counter are arranged in outside of main processer for protecting it from noise. The detecting parts change detected signals into small signals. The countermeasures for noises are (1) Shielding (2) Reinforcement of power circuits (3) Cables & Circ1e core (4) Watch-doc & control of input signals.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.1
• /
• pp.26-31
• /
• 2005

In order to care about preserving the environment for future generations, each country has been required to make the laws of the environment. So manufacturers must design, manufacture and sell goods that meet customer's need and must do this while meeting the needs of the environment. In this research we have developed product structure and configuration management system that treats electronic catalogs for recycling of train parts. This research focused on two system. One is JAVA-based electronic catalog that give the information about recycling of train parts. The other is product structure and configuration management system based on electronic catalog and Bill of Materials(B.O.M).

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.67-71
• /
• 2015

Product of technology developed in this study is an external interface for controlling the equipment of pendant key remote control system circuit board, and it is used in the electronic component test equipment system. Main control system module is in the role as a device for controlling the various control devices that make up the integrated system for microscopic examination at the request of the host computer engineers to control the inspection equipment. The pentane-key interface module to its role as a device for controlling the various control devices that make up the integrated system for microscopic examination at the request of the host computer for the engineer to control the inspection equipment. Development of the control system can be expected in the configuration of a system for efficient and accurate inspection of high-precision parts.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.4 s.235
• /
• pp.526-536
• /
• 2005

A heat dissipation modeling method of EEE parts, or semi-empirical heat dissipation method, is developed for thermal design and analysis an electronic equipment of geostationary satellite. The power consumption measurement value of each functional breadboard is used for the heat dissipation modeling method. For the purpose of conduction heat transfer modeling of EEE parts, surface heat model using very thin ignorable thermal plates is developed instead of conventional lumped capacity nodes. The thermal plates are projected to the printed circuit board and can be modeled and modified easily by numerically preprocessing programs according to design changes. These modeling methods are applied to the thermal design and analysis of CTU (Command and Telemetry Unit) and verified by thermal cycling and vacuum tests.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.141-147
• /
• 2000

For miniaturization of electronic parts and higher productivity, part arrangement job of PCB(printed Circuit Board) has been replaced with complete automated facilities, and contribution which is concerned about this will be expanded continuously. Such part arrangement job of PCB could have lots of influences to entire productivity In this paper, effective grouping method of parts is suggested for the effective insertion path job of PCB concerning the constraints to the size of parts.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.5
• /
• pp.208-215
• /
• 2009

We employed atmospheric plasma to reactively remove the lubricant sprayed onto such industrial electronic parts as LCD chassis during sheet-metal forming processes and investigated basically the effect of plasma parameters on cleansing the surfaces of zinc-electroplated steel plates (EGI). Specimen prepared with some controlled amount of lubricant sprayed on their surfaces beforehand were subjected to two different kinds of atmospheric plasma, one being generated by using air and the other generated by using nitrogen (99.9% purity). Locating the plasma beams at the height range between 3.5 and 13.5 mm from the surface of each specimen and radiating for 5 to 30 seconds resulted out that the cases with a position of 3.5 mm and a duration of 5 seconds or longer showed the surfaces completely cleansed without a trace of lubricant. Furthermore we found out that the plasma generated by using simple air depicted higher cleansing ability than the other one generated by using expensive nitrogen, interestingly useful very much for industrial purposes. On another aspect, we confirmed that the drilled or cut surfaces of Zn-plated steel substrate would not be oxidized even under the influence of plasma during its cleansing process. Therefore, we could probably conclude from this fore-survey that a dry process adopting atmospheric plasma for cleansing industrial parts might be determined to become successful in terms of commercialization, cautiously.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.273-288
• /
• 2006

Information integration of heterogeneous digital parts libraries or electronic pars catalogs is one of issues in B2B procurements. We need to provide an integrated view for multiple information sources. Utilization of ontologies as the metadata descriptions of the information sources can provide an integrated view. However, in order to integrate independently developed ontologies, the mismatches among them should be resolved. In this paper, we propose an ontology of meta-concepts, i.e. meta-ontology. The meta-concepts play the role of vocabulary to describe the parts library ontologies and provide well-established ontological semantics that helps the ontology modelers to consistently identify parts library concepts and systematically structure them. Consequently, the meta-ontology reduces the differences in the way the parts knowledge is interpreted and ensures the mismatches are confined to manageable mis matches, so that a software program can merge automatically. Modeling ontologies of mold and die parts libraries for B2B e-commerce is taken as an example to show how to use the meta-ontology. We also discuss how a parts library mediation system can automatically merge the well-structured parts library ontologies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.791-798
• /
• 2020

The share of advanced technology in modern weapon systems are gradually increasing, and life cycle of components are shortened due to the rapid speed of technological development. On the other hand, the weapon systems have a characteristic that takes a long time in the requirement stage of weapon to the operation and maintenance stage. Due to inevitably, obsolescence of the main components for parts occurs in the acquisition phase. The obsolescence parts could cause delays in mass production schedules, and further adversely affects operational availability due to poor supply of repair parts during in the maintenance phase. However, business managers are obliged to maximize the performance while minimizing the cost of the total life cycle of the design, production, and operation stages. It is necessary to establish and implement an appropriate components and parts of life cycle management plan. In this research, we analyzed the effectiveness of parts obsolescence management through cost avoidance and total life cycle cost that can be reduced through proper parts obsolescence management.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.4E
• /
• pp.142-147
• /
• 2006

Blind signal separation is known as a powerful tool for enhancing noisy speech in many real world environments. In this paper, it is demonstrated that the performance of blind signal separation can be further improved by combining with a null beamformer (NBF). Cascading the blind source separation with null beamforming is equivalent to the decomposition of the received signals into the direct parts and reverberant parts. Investigation of beam patterns of the null beamformer and blind signal separation reveals that directional null of NBF reduces mainly direct parts of the unwanted signals whereas blind signal separation reduces reverberant parts. Further, it is shown that the decomposition of received signals can be exploited to solve the local stability problem. Therefore, faster and improved separation can be obtained by removing the direct parts first by null beamforming. Simulation results using real office recordings confirm the expectation.