• Korean Journal of Materials Research
• /
• v.14 no.3
• /
• pp.186-190
• /
• 2004

An electron beam microcolumn composed of an electron emitter, micro lenses, scan deflector, and focus lenses have been fabricated and tested in the STEM mode. In this paper, we report a technique of precisely aligning the electron lenses by the laser diffraction patterns instead of the conventional alignment method based on aligner and STM. STEM images of a standard Cu-grid were observed using a fabricated microcolumn under both the retarding and accelerating modes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.08a
• /
• pp.172-172
• /
• 2007

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.183-183
• /
• 2004

• Journal of Information Display
• /
• v.3 no.3
• /
• pp.30-34
• /
• 2002

CRTs can be improved by means of magnetic quadrupoles. Areas of improvement are convergence, spot shape, image-flatness and space charge compensation.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.65-69
• /
• 2003

The effects of grapefruit seed extract and $H_2O_2$ disinfectants on Pseudomonas aeruginosa were investigated by antimicrobial assay and scanning electron microscopy. Pseudomonas aeruginosa is a Gram negative bacteria and a common causative microorganism of bacterial keratitis. After incubation of soft contact lens in Pseudomonas aeruginosa suspension for 120 minutes containing the disinfectants, the grapefruit seed extract showed antimicrobial activity as good as the chemical disinfectant. The living rates of Pseudomonas aeruginosa in grapefruit seed extract and $H_2O_2$ disinfectants were $1{\times10^3CFU/m{\ell}$ and $0.5{\times}10^3CFU/m{\ell}$, respectively showing no major difference in the killing activity. However, the mechanisms of the antimicrobial activity were quite different as indicated by scanning electron microscopy of the bacterial surface morphology. Considering chemically or other toxins induced keratitis, the natural disinfectant isolated from grapefruit seed extract shows promising results as a soft contact lens disinfectant.

• Laser Solutions
• /
• v.9 no.3
• /
• pp.15-21
• /
• 2006

A Polypropylene (PP) film was ablated using a femtosecond laser with a center wavelength of 785 nm, a pulse width of 184 fs and a repetition rate of 1 kHz. Increments of both pulse energy and the shot number of pulses lead to co-occurrence of photochemical and thermal effect, demonstrated by the spatial expansion of rim on the surface of PP. The shapes of the laser-ablated PP films were imaged by a scanning electron microscope (SEM) and measured a 3D optical measurement system (NanoFocus). And, the oxygen transmission rate (ORT) of periodically laser-ablated PP film were characterized by oxygen permeability tester for modified atmosphere packaging (MAP) of fresh fruit and vegetable. Our results demonstrate that femtosecond pulsed laser is efficient tools for breathable packaging films in modifying the flow of air and gas into and out of a fresh produce container, where the micropatterns are specifically tailored in size, location and number which are easily controlled by laser pulse energy and pulse patterning system.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.2
• /
• pp.87-91
• /
• 2011

Single layer Sn doped $In_2O_3$ (ITO) films and ITO 50 nm / Au 10 nm / ITO 40 nm (IAI) multilayer films were prepared with electron beam assisted magnetron sputtering on glass substrates. The effects of the Au interlayer, post-deposition atmosphere annealing and intense electron irradiation on the methanol gas sensitivity were investigated at room temperature. As deposited ITO films did not show any diffraction peaks in the XRD pattern, while the IAI films showed the diffraction peak for $In_2O_3$ (400). In this study, the gas sensitivity of ITO and IAI films increased proportionally with the methanol vapor concentration and an intense electron beam irradiated IAI film shows the higher sensitivity than the others film. From the XRD pattern, it is supposed that increased crystallization promotes the gas sensitivity. This approach is promising in gaining improvement in the performance of IAI gas sensors used for the detection of methanol vapor at room temperature.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.15-21
• /
• 2008

It was previously pointed out that mutation is the ultimate source of variation. Adequate variation is needed for plant breeding if there is a limitation in natural genetic resources. When the ionizing radiation has been known to cause chromosomal and genomic alternations, it is widely used for inducing mutagenesis. The electron beam as an ionizing radiation is the principal physical mutagens that induces mutation and effectively used in plant breeding. Since dose-response relationships of electron beam in plant species are rarely known, we investigated the seed germination rate and early seedling growth of irradiated seeds of creeping bentgrass (Agrostis palustris Huds., cv Penn-A1) with various electron beam irradiating conditions (1, 1.3, 2 MeV at both 0.03 mA and 0.06 mA with dose of 100 Gy (Gray) and 0.03, 1, 1.3, 2 MeV at 0.03 mA with dose of 200 Gy, respectively) using electron accelerator at Korea Atomic Energy Research Institute. The growth parameters in terms of shoot length, primary root length, and secondary root length showed similar response between 0.06 / 1 (mA / MeV) at 100 Gy and 0.03 / 0.3 (mA / MeV) at 200 Gy. Bentgrass seed germination was mainly affected by the intensity of irradiated dose (Gray). Germination rate was lowered as the irradiated dose increased. On the other hand, early seedling growth was mainly governed not by the dose of radiation but by voltage.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.1
• /
• pp.17-21
• /
• 2010

Currently miniaturized electron-optical columns find their way into electron beam lithography systems. For better lithography process, it is required to make smaller spot size and longer working distance. But, the micro-columns of the multi-beam lithography system suffer from chromatic and spherical aberration, even when the electron beam is exactly on the symmetric axis of the micro-column. The off-axis error of the electron emitting source is expected to become worse with increasing off-axis distance of the focusing spot. Especially the electron beams far from the system optical axis have a non-negligible asymmetric intensity distribution in the micro-column. In this paper, the effect of the off-axis e-beam source is analyzed. To analyze this effect is to introduce a micro-column model of which the e-beam emitting source is aligned with the center of the electron beam by shifting them perpendicular to the system optical axis. The presented solution can be used to analysis the performance of the multi-electron-beam system. The performance parameters, such as the working distances and the focusing position are obtained by the computational simulations as a function of the off-axis distance of the emitting source.

• Applied Microscopy
• /
• v.33 no.3
• /
• pp.169-178
• /
• 2003

In this review, theoretical approaches of imaging and diffraction in electron microscopy are introduced which allows the diffraction patterns and images to be treated with equal facility and emphasized the relationships between them. The coherent wave optics, incoherent wave imaging theory were introduced. The idea of Abbe theory was also introduced. Varoius phase contrast theories in small angle approximation were derived including the wave theory on Multi-component system.