• 제목/요약/키워드: electron optics

검색결과 188건 처리시간 0.029초

초소형 전자칼럼의 제작 및 특성 연구 (New Fabrication Method of the Electron Beam Microcolumn and Its Performance Evaluation)

  • 안승준;김대욱;김영철;안성준;김영정;김호섭
    • 한국재료학회지
    • /
    • 제14권3호
    • /
    • pp.186-190
    • /
    • 2004
  • An electron beam microcolumn composed of an electron emitter, micro lenses, scan deflector, and focus lenses have been fabricated and tested in the STEM mode. In this paper, we report a technique of precisely aligning the electron lenses by the laser diffraction patterns instead of the conventional alignment method based on aligner and STM. STEM images of a standard Cu-grid were observed using a fabricated microcolumn under both the retarding and accelerating modes.

Using Magnetic Quadrupoles in Cathode-Ray Tubes

  • Sluyterman, A.A.S.
    • Journal of Information Display
    • /
    • 제3권3호
    • /
    • pp.30-34
    • /
    • 2002
  • CRTs can be improved by means of magnetic quadrupoles. Areas of improvement are convergence, spot shape, image-flatness and space charge compensation.

Soft contact lens에 있어서 천연보존제와 합성보존제의 살균효과 : 주사 전자현미경적 관찰 (Effects of natural and chemical disinfectants on soft contact lens infected with Pseudomonas aeruginosa : Scanning Electron Microscopic study)

  • 김인숙
    • 한국안광학회지
    • /
    • 제8권2호
    • /
    • pp.65-69
    • /
    • 2003
  • 본 연구는 천연보존제인 자몽씨 추출물과 합성보존제인 $H_2O_2$를 사용하여 soft contact lens 착용시 각막염의 원인중 하나인 Gram negative bacteria인 Pseudomonas aeruginosa 대한 살균효과를 알아보았다. Pseudomonas aeruginosa는 4주간 배양하여 포낭 형태를 이루게 한 다음 $7{\times}10^6CFU/m{\ell}$의 현탁액에 soft contact lens를 오염시킨 후 천연보존제와 합성보존제의 살균 효과를 비교하였다. 현탁액에 담군 120분후 균의 생존률은 천연보존제는 $1{\times}10^3CFU/m{\ell}$ 합성보존제는 $0.5{\times}10^2CFU/m{\ell}$으로 나타나 유의한 차이는 없었다. 하지만 합성보존제의 경우 눈에 자극감이나 화학적 안 외상을 줄 수 있는 점을 고려하면 자몽씨 추출액과 같은 인체에 무독한 천연 보존제의 개발이 필요한 것으로 나타났다.

  • PDF

Ablation of Polypropylene for Breathable Packaging Films

  • Sohn, Ik-Bu;Noh, Young-Chul;Choi, Sung-Chul;Ko, Do-Kyeong;Lee, Jong-Min;Choi, Young-Jin
    • 한국레이저가공학회지
    • /
    • 제9권3호
    • /
    • pp.15-21
    • /
    • 2006
  • A Polypropylene (PP) film was ablated using a femtosecond laser with a center wavelength of 785 nm, a pulse width of 184 fs and a repetition rate of 1 kHz. Increments of both pulse energy and the shot number of pulses lead to co-occurrence of photochemical and thermal effect, demonstrated by the spatial expansion of rim on the surface of PP. The shapes of the laser-ablated PP films were imaged by a scanning electron microscope (SEM) and measured a 3D optical measurement system (NanoFocus). And, the oxygen transmission rate (ORT) of periodically laser-ablated PP film were characterized by oxygen permeability tester for modified atmosphere packaging (MAP) of fresh fruit and vegetable. Our results demonstrate that femtosecond pulsed laser is efficient tools for breathable packaging films in modifying the flow of air and gas into and out of a fresh produce container, where the micropatterns are specifically tailored in size, location and number which are easily controlled by laser pulse energy and pulse patterning system.

  • PDF

RF 스퍼터와 전자빔 조사를 이용한 ITO/Au/ITO 가스센서 제조 및 특성 평가 (Fabrication and Characterization of the ITO/Au/ITO Thin Film Gas Sensor by RF Magnetron Sputtering and electron Irradiation)

  • 허성보;이학민;김유성;채주현;유용주;김대일
    • 열처리공학회지
    • /
    • 제24권2호
    • /
    • pp.87-91
    • /
    • 2011
  • Single layer Sn doped $In_2O_3$ (ITO) films and ITO 50 nm / Au 10 nm / ITO 40 nm (IAI) multilayer films were prepared with electron beam assisted magnetron sputtering on glass substrates. The effects of the Au interlayer, post-deposition atmosphere annealing and intense electron irradiation on the methanol gas sensitivity were investigated at room temperature. As deposited ITO films did not show any diffraction peaks in the XRD pattern, while the IAI films showed the diffraction peak for $In_2O_3$ (400). In this study, the gas sensitivity of ITO and IAI films increased proportionally with the methanol vapor concentration and an intense electron beam irradiated IAI film shows the higher sensitivity than the others film. From the XRD pattern, it is supposed that increased crystallization promotes the gas sensitivity. This approach is promising in gaining improvement in the performance of IAI gas sensors used for the detection of methanol vapor at room temperature.

Germination and Seedling Growth in Response to Ionizing Radiation in Creeping Bentgrass (Agrostis palustris Huds.)

  • Lee, Yong Jin;Hong, Min Jeong;Kim, Dae Yeon;Lee, Tong Geon;Kim, Dong Sub;Kim, Jin Baek;Lee, Byung Cheol;Han, Young Hwan;Seo, Yong Weon
    • 한국육종학회지
    • /
    • 제40권1호
    • /
    • pp.15-21
    • /
    • 2008
  • It was previously pointed out that mutation is the ultimate source of variation. Adequate variation is needed for plant breeding if there is a limitation in natural genetic resources. When the ionizing radiation has been known to cause chromosomal and genomic alternations, it is widely used for inducing mutagenesis. The electron beam as an ionizing radiation is the principal physical mutagens that induces mutation and effectively used in plant breeding. Since dose-response relationships of electron beam in plant species are rarely known, we investigated the seed germination rate and early seedling growth of irradiated seeds of creeping bentgrass (Agrostis palustris Huds., cv Penn-A1) with various electron beam irradiating conditions (1, 1.3, 2 MeV at both 0.03 mA and 0.06 mA with dose of 100 Gy (Gray) and 0.03, 1, 1.3, 2 MeV at 0.03 mA with dose of 200 Gy, respectively) using electron accelerator at Korea Atomic Energy Research Institute. The growth parameters in terms of shoot length, primary root length, and secondary root length showed similar response between 0.06 / 1 (mA / MeV) at 100 Gy and 0.03 / 0.3 (mA / MeV) at 200 Gy. Bentgrass seed germination was mainly affected by the intensity of irradiated dose (Gray). Germination rate was lowered as the irradiated dose increased. On the other hand, early seedling growth was mainly governed not by the dose of radiation but by voltage.

마이크로 칼럼의 전자 방출원 위치 오차의 영향 (Effect of the Off-axis distance of the Electron Emitting Source in Micro-column)

  • 이응기
    • 반도체디스플레이기술학회지
    • /
    • 제9권1호
    • /
    • pp.17-21
    • /
    • 2010
  • Currently miniaturized electron-optical columns find their way into electron beam lithography systems. For better lithography process, it is required to make smaller spot size and longer working distance. But, the micro-columns of the multi-beam lithography system suffer from chromatic and spherical aberration, even when the electron beam is exactly on the symmetric axis of the micro-column. The off-axis error of the electron emitting source is expected to become worse with increasing off-axis distance of the focusing spot. Especially the electron beams far from the system optical axis have a non-negligible asymmetric intensity distribution in the micro-column. In this paper, the effect of the off-axis e-beam source is analyzed. To analyze this effect is to introduce a micro-column model of which the e-beam emitting source is aligned with the center of the electron beam by shifting them perpendicular to the system optical axis. The presented solution can be used to analysis the performance of the multi-electron-beam system. The performance parameters, such as the working distances and the focusing position are obtained by the computational simulations as a function of the off-axis distance of the emitting source.

TEM 관련 이론해설 (3): 영상 형성이론과 회절이론 (Theory of Imaging And Diffraction)

  • 이확주
    • Applied Microscopy
    • /
    • 제33권3호
    • /
    • pp.169-178
    • /
    • 2003
  • 영상이론과 회절 이론을 같은 비중으로 다루고 이들과의 관계를 나타내는 wave optics 이론을 소개하였다. 결맞는 파동 이론과 결 안맞는 파동이론 사이의 차이를 나타내고 Abbe이론과 여러 가지 phase contrast 이론들을 small angle 근사로 접근하였다. 마지막으로 다중 성분 시스템에 대한 파동 광학의 수학적인 방법의 적용을 소개하였다.