• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.182-188
• /
• 1994

Poly(butadiene-g-MMA) was synthesized by grafting methyl metharcylate on polybutadiene which is intrinsically incompatible with poly(mothy methacrylate)(PMMA) and this graft copolymer was blended with PMMA. Mechanical properties of PMMA-poly(butadiene-g-MMA) blends and PMMA-polybutadiene blends, such as impact strength, tensile strength and haze were determined. Morphological changes of the blends as a function of graft percentage were observed by scanning electron microscopy. Mechanical properties of PMMA-poly(butadiene-g-MMA) blends were better than PMMA-polybutndiene blends. Especially, mechanical properties of PMMA-poly(butadiene-g-MMA) blends were improved nth increasing graft percentage of MMA.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.184-188
• /
• 2016

Highly ordered $SnO_2$ and NiO nanocolumns have been successfully achieved by glancing-angle deposition (GLAD) using an electron beam evaporator. Nanocolumnar $SnO_2$ and NiO sensors exhibited high performance owing to the porous nanostructural effect with the formation of a double Schottky junction and high surface-to-volume ratios. When all gas sensors were exposed to various gases such as $C_2H_5OH$, $C_6H_6$, and $CH_3COCH_3$, the response of the highly ordered $SnO_2$ nanocolumn were over 50 times higher than that of the $SnO_2$ thin film. This work will bring broad interest and create a strong impact in many different fields owing to its particularly simple and reliable fabrication process.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.25-25
• /
• 2010

8 wt.% 망간 (Mn) 이 함유된 마르텐사이트계 고 Mn강은 고강도용 강재로 산업현장에 적용될 수 있는 유용한 재료이다. 그러나, 다량의 망간의 함유로 인한 용접성 저하로 상용화를 위해서는 용접성 평가가 필요하다. 본 연구에서는 gleeble simulator 를 통해 열영향부를 재현한 후 local brittle zones(LBZs) 을 규명하였다. 모재는 Electron Probe Micro Analyzer (EPMA) 및 X-Ray Diffractometer(XRD) 로 분석결과 다량의 Mn 함유로 인해 lath마르텐사이트 미세조직과 소량의 잔류 오스테나이트로 구성되어 있었다. 용접부에서 모재까지 Vickers 경도계로 경도 분포를 측정한 결과 coarse-grained heat affected zone (CGHAZ) 에서 fine-grained heat affected zone (FGHAZ) 까지 경도 증가 후 subcritical heat affected zone (SCHAZ) 까지 급격한 경도 감소 거동을 보였다. 열영향부의 미세조직은 투과전자현미경 (TEM)으로 분석하였다. 연성취성천이온도 (DBTT) 측정을 위해 온도 구간을 상온, $0^{\circ}C$, $-20^{\circ}C$, $-40^{\circ}C$, $-60^{\circ}C$, $-80^{\circ}C$으로 설정하여 charpy impact test를 시행하였다. 그 결과 coarse-grained heat affected zone(CGHAZ) 에서 조대한 결정립으로 인해 낮은 충격값을 보였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.3
• /
• pp.145-152
• /
• 2003

Electrical gate and drain characteristics of double heterostructure InAlAs/InGaAs pseudomorphic HEMTs have been investigated under sub-bandgap photonic excitation ($hv). Drain $(V_{DS})-,{\;}gate($V_{DS})-$, and optical power($P_{opt}$)-dependent variation of the abnormal gate leakage current and associated physical mechanisms in the PHEMTs have been characterized. Peak gate voltage ($V_{GS,P}$) and the onset voltage for the impact ionization ($V_{GS.II}$) have been extracted and empirical model for their dependence on the $V_{DS}$ and $P_{opt} have been proposed. Anomalous gate and drain current, both under dark and under sub-bandgap photonic excitation, have been modeled as a parallel connection of high performance PHEMT with a poor satellite FET as a parasitic channel. Sub-bandgap photonic characterization, as a function of the optical power with $h\nu=0.799eV$, has been comparatively combined with those under dark condition for characterizing the bell-shaped negative humps in the gate current and subthreshold drain leakage under a large drain bias.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.41-45
• /
• 2003

Impurities transmuted in GaN thin film and GaN nanowires after neutron irradiation are studied in this work. The structural properties of GaN nanowires were shown using by Transmission Electron Microscope(TEM). Transmuted impurities that are expected to be doped into GaN thin film and GaN nanowires are then confirmed by photoluminescence(PL). Transmuted atom in GaN materials is Ge atom, Ge-related peaks in GaN thin film lead to emit at 2.9eV, 2.25eV. But emission bands at 2.9eV, 2.25eV are not shown in PL spectra of GaN nanowires. Our experimental results are expected to give deep impact on nano-material doping technology for the achievement of the fabrication of nano-devices.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.93-106
• /
• 1993

Fragmentation patterns on electron impact of 8 chlorinated organophosphorus pesticides were investigated. In most cases, characteristic ions could e identified and the peak clusters due to the $^{35}Cl$ and $^{37}Cl$ isotopes in the fragment ions were found to be highly characteristic. The fragmentation patterns of phosphorus moiety were coincident with previous report in the aspect of mechanism.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.5
• /
• pp.614-621
• /
• 2012

Silver nanoparticles production by the green chemistry approach was investigated using an isolated marine actinomycetes strain. The isolated strain was identified as Streptomyces albidoflavus based on chemotaxonomic and ribotyping properties. The strain revealed production of silver nanoparticles both extracellular and intracellularly. Surface Plasmon Resonance analysis with the function of time revealed that particle synthesis by this strain is reaction time dependent. The produced particles were spherical shaped and monodispersive in nature and showed a single surface plasmon resonance peak at 410 nm. Size distribution histograms indicated production of 10-40-nm-size nanoparticles with a mean size of 14.5 nm. FT-IR spectra of nanopartilces showed N-H, C-H, and C-N stretching vibrations, denoting the presence of amino acid/peptide compounds on the surface of silver nanoparticles produced by S. albidoflavus. Synthesized nanoparticles revealed a mean negative zeta potential and electrophoretic mobility of -8.5 mV and -0.000066 $cm^2/Vs$, respectively. The nanoparticles produced were proteinaceous compounds as capping agents with -8.5 mV zeta potential and revealed antimicrobial activity against both Gram-negative and -positive bacterial strains. Owing to their small size, these particles have greater impact on industrial application spectra.

• Archives of Pharmacal Research
• /
• v.23 no.4
• /
• pp.374-380
• /
• 2000

Propentofylline (PPF, 3-methyl-1-(5-oxohexyl)-7-propylxanthine) has been reported to be a compound for treatment of both vascular dementia and dementia of the Alzheimer type. The short half-life (about 15 min) of PPF at the terminal elimination phase and poor bioavailability after oral administration of PPF to rabbits (Kim et al., 1992) suggest in part that this drug takes the extensive first-pass metabolism in the liver. In addition, the metabolic pathway for PPF remains unclear. The objective of this experiment is to identify urinary metabolites of PPF in rats. For the identification of the metabolites, rat urine was collected after oral administration of 100${m}g/kg$ PPF. PPF metabolite, 3-methyl-1-(5-hydroxyhexyl)-7-propylxanthine, was synthesized and confirmed by gas chromatography/mass spectroscopy (GC/MS) and $^1H$ nuclear magnetic resonance spectroscopy. The urinary metabolites of PPF were extracted with diethyl ether and identified by electron impact and chemical ionization GC/MS. One urinary metabolite was confirmed to be 3-methyl-1-(5-hydroxyhexyl)-7-propylxanthine by synthesized authentic compound. Several metabolites of monohydroxy- and dihydroxy-PPF were identified based on mass fragmentation of both intact and trimethylsilylated derivatives of PPF metabolites and the novel structure of these metabolites is suggested based on mass spectra.

• Advances in nano research
• /
• v.8 no.2
• /
• pp.95-102
• /
• 2020

In this work the properties of iron oxide magnetic nanoparticles (MNPs) synthesized by electrochemical method using different water-alcohol proportions and alcohols have been investigated. The syntheses were carried out using 99% iron foils acting electrodes in a 0.04 M NaCl solutions at room temperature applying 22 mAcm^-2 on the working electrode, mostly obtaining magnetite nanoparticles. The impact of the electrolyte in the size of the synthesized MNPs has been evaluated by transmission electron microscopy (TEM), X-ray diffraction (XRD), chronopotentiometric studies, and magnetic characterization. The results have shown that nanoparticles can be obtained in the range of 6 to 26 nm depending on the type of alcohol and the proportions in the mixture of water-alcohol. The same trend has been observed for all alcohols. As the proportion of these in the medium increases, the nanoparticles obtained are smaller in size. This trend is maintained until a certain proportion of alcohol: 50% for methanol, and 60% for the rest of alcohols, proportions where obtaining a single phase of magnetite is not favored.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.712-720
• /
• 2013

Microwave assisted syntheses of Zn(II), Cd(II) and Hg(II) complexes with 3-aminopyridine (3AP) and nitrite ($NO_2{^-}$) ions have been reported. The metal complexes were characterized by elemental analyses, molar conductance, IR, Far-IR, electronic, NMR ($^1H$, $^{13}C$), thermal and electron impact mass spectral studies. The spectroscopic studies reveal the composition, the nature of nitrite ligand in the complexes, electronic transitions, chemical environments of C and H atoms thermal degradation of the complexes. On the basis of characterization data, distorted tetrahedral geometry is suggested for Zn(II), Cd(II) and Hg(II) complexes. The organic ligand (3AP) and their metal complexes were screened against gram negative pathogenic bacteria and fungi in vitro. The results are compared with our previous report J. Korean Chem. Soc. 2013, 57, 341 on 4-aminopyridine and nitrite ion complexes of the same metal ions.