• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.429-429
• /
• 2008

Li$[Ni_{1/2}Co_{1/2}]O_2$ powder were synthesized from co-precipitation spherical metal oxide, $[Ni_{1/2}Co_{1/2}](OH)_2$. The preparation of metal hydroxide was significantly dependent on synthetic conditions, such as pH, amount of chelating agent, stirring speed, etc. The optimized condition resulted in $[Ni_{1/2}Co_{1/2}](OH)_2$, of which the particle size distribution was uniform and the particle shape was spherical, as observed by scanning electron microscopy. Calcination of the uniform metal hydroxide with LiOH at higher temperature led to a well-ordered layer-structured Li$[Ni_{1/2}Co_{1/2}]O_2$, as confirmed by X-ray diffraction pattern. Also these materials have ${\alpha}-NaFeO_2$ ($R\bar{3}m$) structure. Due to the homogeneity of the metal hydroxide, $[Ni_{1/2}Co_{1/2}](OH)_2$, the final product, Li$[Ni_{1/2}Co_{1/2}]O_2$, was also significantly uniform, i.e., the average particle size was of about 10 to 15 ${\mu}m$ in diameter and the distribution was relatively narrow. As a result, the corresponding tap-density was also high approximately 2.41 $gcm^{-3}$, of which the value is comparable to that of commercialized $LiCoO_2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.456-456
• /
• 2008

In the past few years, the deposition and characterization of cadmium sulfide semiconducting thin films has received a considerable amount of interest due to their potential application in the area of electronic and opto-electronic devices fabrications. Polycrystalline CdS thin films posses good optical transmittance, wide band-gap and electrical properties makes it as one of the ideal material for their application to solar cell fabrication. Cadmium sulfate thin films were deposited by the chemical bath deposition method using tartaric acid and triethanolamine as a complexing agent. Deposition parameters such as pH, temperature, deposition time and concentration of the reactant species were optimized so as to obtain reflecting, good adherent uniform thin films on the glass substrate. Reaction mechanism of the thin film formation is also reported. The crystallographic structure and the crystallite size were studied by the X-ray diffraction pattern. The optical band-gap of deposited film is identified by measuring the transmittance in the visible region. Temperature dependence of resistivity confirmed the semiconducting behavior of the film. Scanning electron micrographs (SEM) showed the presence of grain particles of size 50 nm.

• 에너지공학
• /
• 제19권1호
• /
• pp.16-20
• /
• 2010

본 연구에서는 바이오매스로 커피원두를 이용하여 합성한 카본재료에 도전재로 주석을 이용하였다. 주석을 첨가하는 방법에 따라 단순 혼합, 화학적인 방법을 이용하여 혼합체를 만들어 시료를 합성하였다. 시료에 대한 XRD를 이용하여 주석과 탄소가 혼합된 구조를 가지고 있음을 확인하였고 SEM을 통한 합성된 시료구입자크기($12{\sim}85\;{\mu}m$)와 형태를 확인하였다. 충 방전 테스트를 실시하여 15사이클에서 카본블랙을 사용했을 때(105 mAh/g)보다 주석을 화학적으로 혼합을 시킨 시료의 경우(191 mAh/g)가 방전용량이 더 높게 나타나는 것을 볼 수 있었고, 주석을 단순 혼합을 실시한 경우에서는 카본블랙과 비슷한 용량(131 mAh/g)을 보였다.

• 한국물환경학회지
• /
• 제21권6호
• /
• pp.637-642
• /
• 2005

The focus of this study was to examine the phosphorus removal characteristic by zirconium mesoporous structured material synthesized on various conditions. The zirconium sulfate-surfactant mesoporous structured material(ZS) was synthesized by hydro-thermal synthesis. The material has regular hexagonal array of surfactant micelles and sulfate ion ($HSO_4{^-}$). We confirmed that sulfate ion in zirconium mesoporous structured material can be ion-exchanged with phosphate ion ($H_2PO_4{^-}$) in phosphoric acid solution. On the X-ray diffraction (XRD) pattern of ZS, three peaks which shows the important characteristics of hexagonal crystal lattice were observed at (100), (110) and (200). The transmission electron micrograph (TEM) show high crystallization with pore size about $47{\AA}$. The maximum adsorption capacity of ZS was as great as 3.2 mmol-P/g-ZS. From the adsorption isotherm, correlation coefficients were higher for the Langmuir isotherm than the Freundlich isotherm. With the respect of chain length of surfactant, the adsorption capacity for phosphate synthesized with C12 was higher than C16 and C18. The highest amount of adsorbed phosphate on ZS was observed at the surfactant-to-zirconium molar ratio of 0.5 to 1.

• 한국진공학회지
• /
• 제5권1호
• /
• pp.14-24
• /
• 1996

We have investigated atomic and electronic structures of a clean Pd(111) surface using low energy electron diffraction (LEED) and angle-resolved photoemission spectroscopy (ARPES). A typical clean LEED pattern with a 3-fold symmetry has been observed, corresponding to that for an fcc (111) surface. ARPES measurements have been performed along the $\Gamma-M,\Gamma-K,\Gamma-M$TEX> symmetry lines, from which the experimental band structure of Pd(111) has been determined. The experimental band structure and work function of Pd(111) surface are found to agree well with the calculated band structure of bulk Pd and the calculated work function of Pd(111), respectively. However, the peak positions in the experimental band structure are located closer to the Fermi level than in the theoretical band structure by 0.1~0.8 eV, depending on the $\kappa$-points in the Brillouin zone. In additin, the experimental band widths are narrower than the theoretical band widths by about 0.5eV. The effects of the localized surface Pd 4d states and the Coulomb interaction between Pd 4d bulk electrons have been discussed as possible origins of such discrepancies between experiment and theory.

• 한국진공학회지
• /
• 제6권2호
• /
• pp.172-176
• /
• 1997

Si(111)7×7표면에 In을 증착시킬 때 기판온도와 증착량에 따른 표면구조의 변화를 RHEED(Reflection High Energy Electron Diffraction) 상(pattern)과 RHEED상의 회절반점 (spot)강도 변화를 관찰하여 조사하였다. Si(111) 기판온도를 400℃로 유지하면서 In을 증착 시킬 때 증착량이 약 0.1, 0.3, 0.5ML에서 각각 {{{{ SQRT { 3} }}× {{{{ SQRT { 3} }}, {{{{ SQRT { 31} }}× {{{{ SQRT { 31} }}, 4×1구조가 관찰 시작하였다. 기판온도 300°에서는 증착량이 약 0.2ML에서부터 4×1구조가 나타나고 0.8ML이상에서부터는 4×1+{{{{ SQRT { 3} }}× {{{{ SQRT { 3} 가 관찰되기 시작하였다. Si(111)-{{{{ SQRT { 3} }}× {{{{ SQRT { 3} 기판온도를 실온으로 유지하면서 In를 착시킬 때 증착량이 0.25, 0.7ML에서 각각 2×2, {{{{ SQRT { 7} }}× {{{{ SQRT { 3} 기 시작하였다. RHEED 반점의 강도변화를 이용하여 Si(111)-{{{{ SQRT { 7} }}× {{{{ SQRT { 3} n원자의 이탈 과정을 조사한 결과 이탈 에너지는 2.84eV로 조사되었다.

• 한국산학기술학회논문지
• /
• 제5권3호
• /
• pp.197-203
• /
• 2004

나노미터 크기의 임의형상 패턴을 새기기 위하여 노광기술이 사용된다. 광노광에서 자외선과 엑스레이 같은 전자기파가 나노미터 크기로 형상을 새긴 마스크 위에 조사되면 회절현상은 필연적으로 발생하며 마스크의 상이 불명확하게 웨이퍼 위에 맺히도록 한다. 볼록렌즈만이 프리어변환기 역할을 한다고 알려져 있으며 마스크 위에 패턴의 크기가 전자기파의 파장에 비교하여 매우 클 때에도 볼록렌즈를 사용하면 프리어변환시키는 것이 가능하다. 본 논문에서 설명하는 방법으로 마스크를 준비하여 렌즈 앞에 놓고 레이저 빔으로 조사하면 프리어 평면이라 알려진 평면 위에서만 나노미터 크기의 패턴이 형성된다. 이 방법은 매우 단순한 장치로 구성되어 있고, 현재 혹은 차세대 노광인 자외선/극자외선 및 전자투사노광으로 제작한 최소선폭과 비교해 볼 때 손색이 없다. 여기서는 프리어광학을 이용하여 이론적인 연구결과를 보이고 있지만 가까운 장래에 실험결과로 이론적인 접근을 증명할 수 있을 것이다.

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.550-555
• /
• 2007

The effective fracture toughness testing of materials intended for application in Micro Electro Mechanical Systems (MEMS) devices is required in order to improve understanding of how micro sized material used in device may be expected to perform upon the micro scale. ${\gamma}$-TiAl based materials are being considered for application in MEMS devices at elevated temperatures. Especially, in Alloy 4, both ${\alpha}_2$ and ${\gamma}$ lamellae were altered markedly in 3,000 h, $700^{\circ}C$ exposure. Parallel decomposition of coarse ${\alpha}_2$ into bunches of very fine (${\alpha}_2+{\gamma}$) lamellae. Parallel decomposition of coarse ${\alpha}_2$ into bunches of very fine (${\alpha}_2+{\gamma}$) lamellae. The materials were examined 2 types Alloy 4 on heat exposed specimen($700^{\circ}C$, 3,000 h) and no heat exposed one. Micro sized cantilever beams were prepared mechanical polishing on both side at $25{\sim}30{\mu}m$ and electro final stage polishing to observe lamellar orientation of same colony with EBSD (Electron Backscatter Diffraction Pattern). Through lamellar orientation as inter-lamellae or trans-lamellae, Cantilever beam was fabricated with Focused Ion Beam(FIB). The directional behavior of the lamellar structure was important property in single material, because of the effects of the different processing method and variations in properties according to lamellar orientation. In MEMS application, it is first necessary to have a reliable understanding of the manufacturing methods to be used to produce micro structure.

• Applied Biological Chemistry
• /
• 제34권2호
• /
• pp.94-101
• /
• 1991

멥쌀보리(늘쌀보리, 무등쌀보리, 새쌀보리) 전분과 찹쌀보리(수원 236호) 전분의 이화학적 성질을 비교한 결과는 다음과 같다. 멥쌀보리와 찹쌀보리 전분 입자의 모양은 둥근형이었으며, X선회절도에 의한 전분의 결정형은 전형적인 A형이었다. 물결합 능력, 팽윤력, 용해도는 찹쌀보리 전분이 멥쌀보리 전분보다 높게 나타났다. 0.1% 전분 현탁액의 광투과도는 찹쌀보리 전분의 경우 $60^{\circ}C$ 이후부터 급격히 증가하였고, 멥쌀보리 전분은 $65^{\circ}C$이후부터 서서히 증가하였다. 아밀로그라프에 의한 호화개시온도는 찹쌀보리 전분이 $62.5^{\circ}C$, 멥쌀보리 전분이 $68.2-73.5^{\circ}C$였다. DSC에 의한 호화 엔탈피는 멥쌀보리 전분이 1.12-1.58cal/g, 찹쌀보리 전분이 0.85cal/g 으로 나타났다.

• 한국표면공학회지
• /
• 제42권2호
• /
• pp.86-94
• /
• 2009

Various types of multilayer coatings including Al/$Al_2O_3$ structure have been prepared on Nd-Fe-B permanent magnet to modify the morphology of the coating and to enhance the corrosion resistance of the magnet. Magnetron sputtering has been employed to make the multilayer coatings. $Al_2O_3$sputtering conditions were optimized in reactive sputtering by varying the deposition parameters. The formation of $Al_2O_3$ film was confirmed from the binding energy shift measured by electron spectroscopy for chemical analysis. 3 types of coating structures were designed and prepared by magnetron sputtering. The coating structures consist of (1) single Al coating, (2) modified coatings having oxide or plasma treated layer in the middle of coating structure, and (3) Al/$Al_2O_3$ multilayer coatings. Surface and cross-sectional morphologies showed that Al/$Al_2O_3$ multilayer grew as a layered structure, and that very compact Zone 3 like structure were formed. X-ray diffraction peak showed that the crystal orientations of multilayer coatings were similar to that of the bulk powder pattern. Hardness increased drastically when the Al thickness was around 1im in the Al/$Al_2O_3$ multilayer. From the salt spray test and pressure cooker test, it has been shown that the multilayer coatings showed good corrosion resistance compared to Al single or modified layer coatings.