• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.52-57
• /
• 2018

Surface dielectric barrier discharge (SDBD), which is widely used to control turbulence in aerodynamics, has a significant effect on the radar cross-section (RCS). A four-way linearly synthesized SDBD air plasma actuator is designed to bolster the plasma effects on electromagnetic waves. The diffraction angle is calculated to predict the RCS because of the periodic structure of staggered electrodes. The simplified plasma modeling is utilized to calculate the inhomogeneous surface plasma distribution. Monostatic RCS shows the diffraction in the plane perpendicular to the electrode array and the notable distortion by plasma. In comparison, the overall pattern is maintained in the parallel plane with minor plasma effects. The trends also appear in the bistatic RCS, which has a significant difference in the observation plane perpendicular to the electrodes. The peaks by Bragg's diffraction are shown, and the RCS is reduced by 10 dB in a certain range by the plasma effect. The diffraction caused by the actuator and the inhomogeneous air plasma should be considered in designing an SDBD actuator for a wide range of application.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.43-46
• /
• 2003

This paper presents capacity characteristics of the indoor LOS(Line-Of-Sight) propagation channel for MIMO system at 5GHz. The distance between antenna elements, their moving path, and number of transmitting and receiving antennas can be determined by wanted eigen-vlaue, and channel capacity of the MIMO communication channel using only reliable simulation without measurements. The simulation uses 3D Ray tracing and patch scattering model to which electromagnetic material constants are applied. As distance between antenna elements increases, distribution of the eigen-value show a tendency to decrease, but channel capacity increases in LOS environment. However, despite of short distance between antenna elements, large value of channel capacity is obtained in positions which have high AS. When the position of receiver antennas are shifted, channel capacity hardly changed, and as number of antenna elements increases, channel capacity also increases regularly.

• Journal of electromagnetic engineering and science
• /
• v.17 no.4
• /
• pp.169-177
• /
• 2017

The role of electromagnetic (EM) waves in magnetic fusion plasma-ranging from radio frequency (RF) to microwaves-has been extremely important, and understanding of EM wave propagation and related technology in this field has significantly advanced magnetic fusion plasma research. Auxiliary heating and current drive systems, aided by various forms of high-power RF and microwave sources, have contributed to achieving the required steady-state operation of plasmas with high temperatures (i.e., up to approximately 10 keV; 1 eV=10000 K) that are suitable for future fusion reactors. Here, various resonance values and cut-off characteristics of wave propagation in plasmas with a nonuniform magnetic field are used to optimize the efficiency of heating and current drive systems. In diagnostic applications, passive emissions and active sources in this frequency range are used to measure plasma parameters and dynamics; in particular, measurements of electron cyclotron emissions (ECEs) provide profile information regarding electron temperature. Recent developments in state-of-the-art 2D microwave imaging systems that measure fluctuations in electron temperature and density are largely based on ECE. The scattering process, phase delays, reflection/diffraction, and the polarization of actively launched EM waves provide us with the physics of magnetohydrodynamic instabilities and transport physics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.440-448
• /
• 1999

This paper describes a full wave analysis of the scattering from electromagnetic absorbers which can be approximated as infinite periodic structure using hybrid finite element method. By introducing fictitious boundaries, equivalent finite region is defined and proper boundary conditions of each boundary are obtained by Floquet theorem. Since higher-order Floquet modes are employed, the method presented in this paper can be readily applied to the periodic structure haying a relatively long period. To reduce difficulty in evaluating the surface integral, the normal component to the surface were represented with the tangential component to the surface. Comparisons of calculated results with analytical or published ones show the validation of the method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.320-326
• /
• 2011

Comparative study on the total transmission(zero reflection) has been done between two FSS structures which are coqmposed of the resonant aperture and the nonresonant aperture. It has been found that, the FSS of the resonant aperture has much larger ratio ${\lambda}$/T of wavelength ${\lambda}$ to array periodicity T than that of the FSS of the nonresonant aperture for the total transmission(or zero reflection). Also the operating frequency can be made to be significantly reduced by using such a resonant structure. This physical situation is thought to be similar to that of EOT(Extraordinary Optical Transmission) phenomenon, in optics area.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1486-1492
• /
• 2015

The following study carried out the characteristic analysis based on the magnet segment of Interior Permanent Magnet Synchronous Motor(IPMSM) for the urban railway vehicles. IPMSM affects the electromagnetic characteristics through the change in magnetic flux based on the rotor structure, and significantly influences the structural features through the change of pressure. Therefore, satisfied by the demanded traction force of the IPMSM, magnet segment derived three different model types. The 1-segment PM model consisted an undivided permanent magnet. The 2-Bridge model consisted a divided permanent magnet with the application of Bridge. The 3-Bridge model consisted additional dividing with one more Bridge applied. The electromagnetic characteristics of the three models were compared and analyzed along with the structural features regarding the scattering of permanent magnet based on strong centrifugal force from the rotation of the rotor at high speed. In conclusion, the final model with electromagnetic characteristics and structural features most suitable of IPMSM for the urban railway vehicles was derived, and the effectiveness was verified through the characteristic experiments after the production of the derived model.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.146-150
• /
• 2001

Electromagnetic simulation was compared to the measurement with a network analyzer in the cavity resonator method which has been used for determining microwave quality factor. Scattering matrix $S_{12}$ obtained from the network analyzer was compared to the $S_{12}$ obtained from the simulation. The effects of the pore and the secondary phase of the dielectric resonator on the microwave quality factor were studied. From the simulated results, the dominant resonant $TE_{01\delta}$ mode was determined and the quality factor was observed to decrease with the pore and the secondary phase in the dielectrics.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.6-12
• /
• 2019

An IE-FFT algorithm is implemented and applied to the electromagnetic (EM) solution of perfect electric conducting (PEC) scattering problems. The solution of the method of moments (MoM), based on the magnetic field integral equation (MFIE), is obtained for PEC objects with closed surfaces. The IE-FFT algorithm uses a uniform Cartesian grid to apply a global fast Fourier transform (FFT), which leads to significantly reduce memory requirement and speed up CPU with an iterative solver. The IE-FFT algorithm utilizes two discretizations, one for the unknown induced surface current on the planar triangular patches of 3D arbitrary geometries and the other on a uniform Cartesian grid for interpolating the free-space Green's function. The uniform interpolation of the Green's functions allows for a global FFT for far-field interaction terms, and the near-field interaction terms should be adequately corrected. A 3D block-Toeplitz structure for the Lagrangian interpolation of the Green's function is proposed. The MFIE formulation with the IE-FFT algorithm, without the help of a preconditioner, is converged in certain iterations with a generalized minimal residual (GMRES) method. The complexity of the IE-FFT is found to be approximately $O(N^{1.5})$and $O(N^{1.5}logN)$ for memory requirements and CPU time, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.585-591
• /
• 2014

An improved numerical scattering model with the 2-dimensional moment method including roof-top basis and a modified window-function to reduce edge-effect is presented in this study. The roof-top basis function is used to depict randomly positioned surface currents and increase an efficiency of the moment method. To reduce the edge-effect which occurs at the end of numerically generated surfaces, an enhanced window-function which is weighted by incident angle variable is proposed. To validate an proposed 2-dimensional scattering model and numerical analysis techniques for randomly rough surfaces, computational results are compared and analyzed to SPM(Small Perturbation Model) as well.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1124-1131
• /
• 2011

In this paper, image reconstruction algorithm for breast cancer detection using MT(Microwave Tomography) was investigated. The breast cancer detection system under development uses 16 transmit/receive antennas. The signal waveform was a sinusoidal wave at 900 MHz. To solve the 2D inverse scattering problem, we used the 2D FDTD (Finite Difference Time Domain) method for forward calculation and LMA(Levenberg-Marquardt Algorithm) for optimization. The result of the image reconstruction using the numerical phantom by MRI(Magnetic Resonance Imaging) obtained from real patient of breast cancer showed that we can detect the position of the tumor accurately.