• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.323-324
• /
• 2023

The properties of cement mortar mixed with manganese-doped titanium dioxide nanowires (TiO₂(Mn)-NWs) were investigated in this study. The TiO₂(Mn)-NWs were synthesized using solvo-thermal synthesis and electro-spinning techniques. The TiO₂(Mn)-NWs at weights of 1%, ₂%, and 3% of the cement were respectively mixed into the cement mortar. The results showed that as the amount of TiO₂(Mn)-NWs increased, the flow value of the cement mortar was decreased and the setting time of cement mortar was accelerated. Moreover, as the amount of TiO₂(Mn)-NWs increased, the compressive strength of cement mortar was increased and the efficiency of acetaldehyde removal was improved.

• 멤브레인
• /
• 제18권4호
• /
• pp.306-316
• /
• 2008

전기방사법을 이용하여 제조된 pelyestersulfone (PES)-bovin albumin serum (BSA) 친화막에 대하여 L-tryptophan에 대한 흡착특성을 연구하였다. FESEM과 Image Analyzer를 이용하여 방사조건에 따른 섬유의 직경분포를 비교분석 함으로써 섬유의 직경을 조절할 수 있음을 알았다. 또한, 2,2,3,4,4,4-Hexafluoro-1-butanol (HFB)와 BSA의 함량증가에 따른 미세섬유 발생빈도가 높아져서 Darcy 투과도, 기계적 물성, 발수성이 증가한다는 것을 알았다. L-tryptophan의 용출량은 tris-HCl 완충용액보다 borate-DMSO 완충용액에서 높았으며, A 8022형 BSA보다 A 7906형 BSA가 높은 용출량을 보였다. 이러한 결과는 BSA의 종류에 따른 그 특성에 기인하는 것으로 A 7906형은 A 8022형보다 순도가 높고 분자량 분포가 고르며, 사용 pH 환경이 더욱 안정적이기 때문이다.

• 공업화학
• /
• 제24권4호
• /
• pp.402-406
• /
• 2013

본 연구에서는 납사 크래킹 잔사유로부터 용융전기방사용 핏치가 열처리 개질 방법에 의하여 제조되었다. 개질된 핏치의 연화점과 물성은 질소유량, 열처리 온도 및 반응시간 같은 개질 조건에 따라 영향을 받았다. 이중에서 열처리온도가 핏치의 분자량 분포 및 연화점에 큰 영향력을 미쳤다. 열처리 온도가 증가함에 따라서 표면 작용기들의 분해와 고리화 반응으로 C/H 몰비와 평균분자량이 증가하였다. 또한, 벤젠 불용분(BI)과 퀴놀린 불용분(QI)값이 감소되었고, 분자량 분포의 폭이 더 좁아지는 것으로 보여주었다. 연화점이 $155^{\circ}C$인 개질 핏치로부터 용융전기방사법을 이용하여 $4.8{\mu}m$의 직경을 갖는 탄소섬유를 얻을 수 있었다. 용융전기방사법이 저섬경화 섬유를 제조하는데 기존의 용융방사법보다 더 용이할 것으로 여겨진다.

• 폴리머
• /
• 제32권5호
• /
• pp.409-414
• /
• 2008

전기방사법으로 이온염을 함유하는 TFE/증류수 혼합용매를 이용하여 젤라틴 나노섬유를 제조하였으며, 얻어진 나노섬유의 평균직경은 $110{\sim}125\;nm$였다. 이온염의 농도가 증가할수록 비드의 발생이 줄어들고 균일한 나노섬유 제조가 가능하였다. 이는 이온염의 첨가에 의한 젤라틴 용액의 점도 및 전도도가 증가함에 기인하는 것으로 확인되었다. 특히 일가이온보다 이가이온을 사용할 경우 점도 및 전도도의 증가에 더 효과적이었으며 이들 이온염은 분자간 소수성 상호작용뿐만 아니라 젤라틴 분자의 입체구조 정렬에도 영향을 주었다. 그러나 이온염 농도에 따른 나노섬유의 직경변화는 관찰되지 않았다. 제조된 나노섬유를 이용한 XRD분석 결과 이온염의 농도가 증가할수록 젤라틴 분자의 재결정화에 의해 나노섬유의 결정화도가 높아졌다.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.125-132
• /
• 2011

Fibrous chitosan membranes were fabricated as a substrate for skin applications using an electro-spinning process with different solvents and varying concentrations. Scanning electron microscopy (SEM) images confirmed that the formation of the chitosan fibrous membrane in trifluoroacetic acid was better than that in acetic acid. Fourier transform infrared spectroscopy showed that the chitosan fibers were cross-linked with glutaraldehyde, and that the cytotoxicity of the aldehyde groups was reduced by glycine and washing by NaOH and DI water. Chitosan cross-linked fibrous membranes were insoluble in water and could be washed thoroughly to wash away glycine and excess NaOH and prevent the infiltration of other water soluble bio-toxic agents using DI water. MTT assay method was employed to test the cytotoxicity of chitosan membranes during fabricating, treating and washing processes. After the dehydration of cell cultured chitosan membranes, cell attachment behavior on the material was evaluated using SEM method. Effect of the treatment processes on the biocompatibility of the chitosan membranes was shown by comparing of filopodium and lamellipodium of fibroblast cells on grown washed and unwashed chitosan fibrous membrane. The MTT assay and SEM morphology confirmed that the washed chitosan fibrous membrane increased cell attachment and cell growth, and decreased toxicity compared to results for the unwashed chitosan fibrous membrane.

• 산업기술연구
• /
• 제38권1호
• /
• pp.15-19
• /
• 2018

In this study, hyaluronic acid (HA) was electro-spun to fabricate nanofibrous membranes for support materials. Because HA is very hygroscopic, it is difficult to obtain enough viscosity to apply electrospinning method. Therefore, we mixed HA with polyethylene oxide (PEO) to obtain proper viscosity and added adipic acid (ADH) to promote cross-linking of PEO/HA during electrospinning. The morphology of PEO/HA membrane was optimized according to PEO/HA concentration ratio and spinning rate. Finally, we fabricated gold-nanoparticle-embedded PEO/HA membranes and their catalyst activities were evaluated in tetramethylbenzidine (TMB) oxidation.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.35-41
• /
• 2005

Research and development of nano fiber products is very active over the world. Physical characteristics and dyeing properties of nylon 66 nano fiber were investigated in this study. X-ray diffraction, DSC, analysis of amino end group, and water absorption were performed to get information concerning physical properties of nano fiber. Nylon 66 nano fiber was dyed with high molecular mass acid dyes. Effects of dyeing temperature, pH of dyeing solution, and concentration of acid dyes on dyeing properties such as rate of dyeing and the extent of exhaustion, were examined and compared to those of regu­lar fiber. It was found that nano fiber adsorbed acid dyes at lower temperature, got rapidly dyed, and its extents of exhaustion at specific dyeing temperature were higher than regular fiber. It was also observed that nano fiber could adsorb a large amount of acid dye without a significant loss in the extent of exhaustion. Washing fastness of the dyed nano fiber was lower by $1/2\~1$ grade, light fastness by 1 grade than the dyed regular fiber.

• Macromolecular Research
• /
• 제13권1호
• /
• pp.62-67
• /
• 2005

This paper investigated the effect of biodegradation behavior on the oxidation of cellulose nanofiber mats. The cellulose mats were produced through electro spinning. The diameter of an electrospun fiber varied from 90 to 240 nm depending on the electrospinning parameters, such as the solution concentration, needle diameter, and rotation speed of a grounded collector. Oxidized cellulose (OC).mats containing different carboxyl contents were prepared using $NO_2$ as an oxidant. The total carboxyl content of the cellulose nanofiber mats obtained after oxidation for 20 h was $20.6\%$. The corresponding carboxyl content was important from a commercial point of view because OC containing $16-24\%$ carboxyl content are used widely in the medical field as a form of powder or knitted fabric. Degradation tests of the OC mats were performed at $37^{\circ}C$ in phosphate-buffered saline (pH 7.4). Microscopy techniques were introduced to study the morphological properties and the degradation behavior of the OC mats. Morphological changes of the mats were visualized using optical microscopy. Within 4 days of exposure to PBS, the weight loss of the OC mats was $>90\%$.

• 멤브레인
• /
• 제26권2호
• /
• pp.87-96
• /
• 2016

세라믹 소재는 고분자 나노섬유 분리막과 비교하여 우수한 열안정성과 고투과 물성을 가짐으로써 지난 10여 년간 많은 주목을 이끌어왔다. 최근 들어 높은 다공도와 유량을 가지는 세라믹 섬유 분리막이 금속 산화물을 이용하여 주로 전기방사법에 의해 제조되어 왔는데, 이러한 세라믹 분리막의 제조 단가를 감소하며 성능을 향상시키기 위해 나노섬유의 선택층을 가지는 세라믹 분리막들이 전기방사 공정과 개질 과정을 통해 개발되었다. 본 리뷰에서는 최근 수년간 세라믹 섬유 분리막의 개발을 위한 연구 동향에 대하여 정리하였다.

• Macromolecular Research
• /
• 제15권5호
• /
• pp.424-429
• /
• 2007

A procedure for the surface hydrolysis of an electrospun poly(${\epsilon}$-caprolactone) (PCL) fibrous scaffold was developed to enhance the adhesion and proliferation of osteoblasts. The surface hydrolysis of fibrous scaffolds was performed using NaOH treatment for the formation of carboxyl groups on the fiber surfaces. The hydrolysis process did not induce deformation of the fibers, and the fibers retained their diameter. The cell seeding density on the NaOH-treated PCL fibrous scaffolds was more pronounced than on the non-treated PCL fibers used as a control. The alkaline phosphatase activity, osteocalcin and a mineralization assay strongly supported that the surface-hydrolyzed PCL fibrous scaffolds provided more favorable environments for the proliferation and functions of osteoblasts compared to the non-treated PCL fibrous scaffolds use as a control.