Browse > Article
http://dx.doi.org/10.14579/MEMBRANE_JOURNAL.2016.26.2.87

Development Trend of Membrane Filter Using Ceramic Fibers  

Kim, Deuk Ju (Department of Materials Engineering and Convergence Technology, Engineering Research Institute, Gyeongsang National University)
Lee, Jeong Woo (Department of Materials Engineering and Convergence Technology, Engineering Research Institute, Gyeongsang National University)
Nam, Sang Yong (Department of Materials Engineering and Convergence Technology, Engineering Research Institute, Gyeongsang National University)
Publication Information
Membrane Journal / v.26, no.2, 2016 , pp. 87-96 More about this Journal
Abstract
Ceramic materials have attracted increasing attention in the last 10 years because of their high thermal stability and high permeation property compared with polymeric nanofiber membranes. Recently, novel nanofiber ceramic membranes with high porosity and flux have been fabricated from metal oxide nanofibers. To improve the performance of ceramic membranes and reduce their costs, a new ceramic membrane with a selective separation layer made of nanofibers was fabricated by electrospinning process and modification process for filtration system. This review summarizes the research trends for the development of ceramic nanofiber membrane over the past few years.
Keywords
Ceramic fiber; Membrane; Electro spinning; Porosity;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 M. Fukushima, Y. I. Yoshizawa, and T. Ohji, "Macroporous ceramics by gelation-freezing route using gelatin", Adv. Eng. Mater., 16, 607 (2014).   DOI
2 M. F. Sanches, N. Vitorino, C. Freitas, J. C. C. Abrantes, J. R. Frade, J. B. R. Neto, and D. Hotza, "Cellular ceramics by gelatin gelcasting of emulsified suspensions with sunflower oil", J. Eur. Ceram. Soc., 35, 2577 (2015).   DOI
3 S. Vijayan, R. Narasimman, and K. Prabhakaran, "A urea crystal templating method for the preparation of porous alumina ceramics with the aligned pores", J. Eur. Ceram. Soc., 33, 1929 (2013).   DOI
4 G. Frank, E. Christian, and K. Dietmar, "A novel production method for porous sound-absorbing ceramic material for high-temperature applications", Int. J. Appl. Ceram. Technol., 8, 646 (2011).   DOI
5 S. Meille, M. Lombardi, J. Chevalier, and L. Montanaro, "Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior", J. Eur. Ceram. Soc., 32, 3959 (2012).   DOI
6 R. Stanculescu, C. E. Ciomaga, L. Padurariu, P. Galizia, N. Horchidan, C. Capiani, C. Galassi, and L. Mitoseriu, "Study of the role of porosity on the functional properties of (Ba, Sr) $TiO_3$ ceramics", J. Alloy. Compd., 643, 79 (2009).
7 S. R. Shin, S. H. Han, and J. H. Kim, "Synthesis and characterization of soluble co-polyimides for biogas purification", Membr. J., 25, 231 (2015).
8 S. H. Kwon and J. W. Rhim, "Facilitated transport separation of carbon dioxide using aminated polyetherimide membranes", Membr. J., 25, 248 (2015).   DOI
9 J. Roscow, Y. Zhang, J. Taylor, and C. R. Bowen, "Porous ferroelectrics for energy harvesting applications", Eur. Phys. J.-Spec. Top., 224, 2949 (2015).   DOI
10 J. M. Lee, M. G. Lee, S. J. Kim, H. C. Koh, and S. Y. Nam, "Characterization of gas permeation properties of polyimide copolymer membranes", Membr. J., 25, 223 (2015).   DOI
11 M. Liu, H.-Q. Zhou, M. Liu, Z.-X. Yue, and H.-K. Zhu, "Effects of various fillers on sintering, microstructures and properties of Ca-Ba-Al-B-Si-O glass/ceramic composites", J. Cent. South Univ., 21, 843 (2014).   DOI
12 P. Colombo, "Conventional and novel processing methods for cellular ceramics, Philosophical Transactions of the Royal Society of London A: Mathematical", Philos. Trans. R. Soc. A-Math. Phys. Eng. Sci., 364, 109 (2006).   DOI
13 A. R. Studart, U. T. Gonzenbach, E. Tervoort, and L. J. Gauckler, "Processing routes to macroporous ceramics: a review", J. Am. Ceram. Soc., 89, 1771 (2006).   DOI
14 V. G. Resmi, J. P. Deepa, V. Lakshmi, T. P. D. Rajan, C. Pavithran, and B. C. Pai, "Processing of porous SiC by aluminum-derived binders and sacrificial porogen leaching method", Int. J. Appl. Ceram. Technol., 12, 967 (2015).   DOI
15 U. T. Gonzenbach, A. R. Studart, E. Tervoort, and L. J. Gauckler, "Macroporous ceramics from particle-stabilized wet foams", J. Am. Ceram. Soc., 90, 16 (2007).   DOI
16 J. H. Lee, G. H. Ryu, J. H. Cho, T. K. Song, M. H. Kim, T. G. Park, D. Do, S. S. Kim, Y. S. Sung, andS. Baik, "A-site effects on the dielectric and the piezoelectric properties of (Na0. 50+x K0.50-x)(Nb0. 55Ta0. 45) O3 ceramics", J. Korean Phys. Soc., 60, 297 (2012).   DOI
17 B. V. M. Kumar and Y. W. Kim, "Processing of polysiloxane-derived porous ceramics: a review", Sci. Technol. Adv. Mater., 11, 044303 (2010).   DOI
18 L. Y. Zhang, D. L. Zhou, Y. Chen, B. Liang, and J. B. Zhou, "Preparation of high open porosity ceramic foams via direct foaming molded and dried at room temperature", J. Eur. Ceram. Soc., 34, 2443 (2014).   DOI
19 http://www.pall.co.kr, April 12 (2016).
20 K. R. Cummer and R. C. Brown, "Ancillary equipment for biomass gasification", Biomass Bioenerg., 23, 113 (2002).   DOI
21 S. Heidenreich, "Hot gas filtration- A review", Fuel, 104, 83 (2013).   DOI
22 Z. Zhang, X. Li, C. Wang, L. Wei, Y. Liu, and C. Shao, "ZnO hollow nanofibers: fabrication from facile single capillary electrospinning and applications in gas sensors", J. Phys. Chem. C, 113, 19397 (2009).   DOI
23 F. Yang, R. Murugan, S. Wang, and S. Ramakrishna, "Electrospinning of nano/micro scale poly (L-lactic acid) aligned fibers and their potential in neural tissue engineering", Biomaterials, 26, 2603 (2005).   DOI
24 Q. Fan and M. S. Whittingham, "Electrospun manganese oxide nanofibers as anodes for lithium-ion batteries", Electrochem. Solid State Lett., 10, A48 (2007).   DOI
25 H. Li, W. Zhang, B. Li, and W. Pan, "Diameter-dependent photocatalytic activity of electrospun $TiO_2$ nanofiber", J. Am. Ceram. Soc., 93, 2503 (2010).   DOI
26 A. Yang, X. Tao, G. K. H. Pang, and K. G. G. "Siu, Preparation of porous tin oxide nanobelts using the electrospinning technique", J. Am. Ceram. Soc., 91, 257 (2008).
27 C. Ban, N. A. Chernova, and M. S. Whittingham, "Electrospun nano-vanadium pentoxide cathode", Electrochem. Commun., 11, 522 (2009).   DOI
28 Y. He, T. Zhang, W. Zheng, R. Wang, X. Liu, Y. Xia, and J. Zhao, "Humidity sensing properties of $BaTiO_3$ nanofiber prepared via electrospinning", Sens. Actuator B-Chem., 146, 98 (2010).   DOI
29 S. K. Choi, S. Kim, S. K. Lim, and H. Park, "Photocatalytic comparison of $TiO_2$ nanoparticles and electrospun $TiO_2$ nanofibers: effects of mesoporosity and interparticle charge transfer", J. Phys. Chem. C, 114, 16475 (2010).   DOI
30 T. Yin, D. Liu, Y. Ou, F. Ma, S. Xie, J.-F. Li, and J. Li, "Nanocrystalline thermoelectric $Ca_3Co_4O_9$ ceramics by sol-gel based electrospinning and spark plasma sintering", J. Phys. Chem. C, 114, 10061 (2010).   DOI
31 S. H. Park, S. M. Lee, H. S. Lim, J. T. Han, D. R. Lee, H. S. Shin, Y. Jeong, J. Kim, and J. H. Cho, "Robust superhydrophobic mats based on electrospun crystalline nanofibers combined with a silane precursor", ACS Appl. Mater. Interfaces, 2, 658 (2010).   DOI
32 T. Pirzada, S. A. Arvidson, C. D. Saquing, S. S. Shah, and S. A. Khan, "Hybrid silica PVA nanofibers via sol-gel electrospinning", Langmuir, 28, 5834 (2012).   DOI
33 Y. Gu, F. Jian, and X. Wang, "Synthesis and characterization of nanostructured $Co_3O_4$ fibers used as anode materials for lithium ion batteries", Thin Solid Films, 517, 652 (2008).   DOI
34 P. S. Archana, R. Jose, T. M. Jin, C. Vijila, M. M. Yusoff, and S. Ramakrishna, "Structural and electrical properties of Nb doped anatase $TiO_2$ nanowires by electrospinning", J. Am. Ceram. Soc., 93, 4096 (2010).   DOI
35 C.-J. Li and J.-N. Wang, "Electrospun $SrRe_{0.6}$ $Fe_{11.4}$ $O_{19}$ magnetic nanofibers: Fabrication and characterization", Mater. Lett., 64, 586 (2010).   DOI
36 L. Li, P. Zhang, J. Liang, and S.M. Guo, "Phase transformation and morphological evolution of electrospun zirconia nanofibers during thermal annealing", Ceram. Int., 36, 589 (2010).   DOI
37 P.-C. Yu, R.-J. Yang, Y.-Y. Tsai, W. Sigmund, and F.-S. Yen, "Growth mechanism of single-crystal a-$Al_2O_3$ nanofibers fabricated by electrospinning techniques", J. Eur. Ceram. Soc., 31, 723 (2011).   DOI
38 X. B. Ke, Z. F. Zheng, H. W. Liu, H. Y. Zhu, X. P. Gao, L. X. Zhang, N. P. Xu, H. Wang, H. J. Zhao, and J. Shi, "High-flux ceramic membranes with a nanomesh of metal oxide nanofibers", J. Phys. Chem. B, 112, 5000 (2008).   DOI
39 B.-Y. Lee, K. Behler, M. E. Kurtoglu, M. A. Wynosky-Dolfi, R. F. Rest, and Y. Gogotsi, "Titanium dioxide-coated nanofibers for advanced filters", J. Nanopart. Res., 12, 2511 (2010).   DOI
40 C. Feng, K. C. Khulbe, T. Matsuura, S. Tabe, and A. F. Ismail, "Preparation and characterization of electro-spun nanofiber membranes and their possible applications in water treatment", Sep. Purif. Technol., 102, 118 (2013).   DOI
41 Q. Wang, Y. Bai, J. Xie, Q. Jiang, and Y. Qiu, "Synthesis and filtration properties of polyimide nanofiber membrane/carbon woven fabric sandwiched hot gas filters for removal of PM 2.5 particles", Powder Technol., 292, 24 (2016).
42 R. A. Lopes and A. M. Segadaes, "Microstructure, permeability and mechanical behaviour of ceramic foams", Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 209, 149 (1996).   DOI
43 L. Gan, M. Zhou, D. Yang, and X. Qiu, "Adsorption characteristics of carboxymethylated lignin at a hydrophobic solid/water interface", Iran. Polym. J., 23, 47 (2014).   DOI
44 S. Alkoy, H. Yanik, and B. Yapar, "Fabrication of lead zirconate titanate ceramic fibers by gelation of sodium alginate", Ceram. Int., 33, 389 (2007).   DOI
45 S. Li, C.-A. Wang, and J. Zhou, "Effect of starch addition on microstructure and properties of highly porous alumina ceramics", Ceram. Int., 39, 8833 (2013).   DOI
46 K.-Y. Lim, Y.-W. Kim, and I.-H. Song, "Porous sodium borate-bonded SiC ceramics", Ceram. Int., 39, 6827 (2013).   DOI
47 R. L. Menchavez, C. R. M. Adavan, and J. M. Calgas, "Starch consolidation of red clay-based ceramic slurry inside a pressure-cooking system", Mater. Res., 17, 157 (2014).   DOI
48 H.-C. Yen, "A new slurry-based shaping process for fabricating ceramic green part by selective laser scanning the gelled layer", J. Eur. Ceram. Soc., 32, 3123 (2012).   DOI
49 B. Elyassi, M. Sahimi, and T. T. Tsotsis, "A novel sacrificial interlayer-based method for the preparation of silicon carbide membranes", J. Membr. Sci., 316, 73 (2008).   DOI
50 T.-H. Yoon, H.-J. Lee, J. Yan, and D.-P. Kim, "Fabrication of SiC-based ceramic microstructures from preceramic polymers with sacrificial templates and lithographic techniques-A review", J. Ceram. Soc. Jpn., 114, 473 (2006).   DOI
51 J. S. Han, C. W. Gal, J. H. Kim, and S. J. Park, "Fabrication of high-aspect-ratio micro piezoelectric array by powder injection molding", Ceram. Int., 42, 9475 (2016).   DOI
52 J. Deckers, J.-P. Kruth, L. Cardon, K. Shahzad, and J. Vleugels, "Densification and geometrical assessments of alumina parts produced through indirect Selective Laser Sintering of alumina-polystyrene composite powder", Strojniski Vestn.-J. Mech. Eng., 59, 646 (2013).
53 E. Mostafavi and A. Ataie, "Destructive interactions between pore forming agents and matrix phase during the fabrication process of porous $BiFeO_3$ ceramics", J. Mater. Sci. Technol., 31, 798 (2015).   DOI
54 R. Liu, T. Xu, and C.-A. Wang, "A review of fabrication strategies and applications of porous ceramics prepared by freeze-casting method", Ceram. Int., 42, 2907 (2016).   DOI
55 B. Su, D. Zhang, and T. W. Button, "Embossing of ceramic micro-pillar arrays", J. Eur. Ceram. Soc., 32, 3345 (2012).   DOI
56 D. A. Hall, J. D. S. Evans, S. J. Covey-Crump, R. F. Holloway, E. C. Oliver, T. Mori, and P. J. Withers, "Effects of superimposed electric field and porosity on the hydrostatic pressure-induced rhombohedral to orthorhombic martensitic phase transformation in PZT 95/5 ceramics", Acta Mater., 58, 6584 (2010).   DOI
57 J. Hur, J. H. Kim, T. G. Lee, I. T. Seo, D. H. Kim, S. Nahm, and C. Y. Kang, "Structural and piezoelectric properties of (1-x)Pb(Zr1-yTiy)$O_3$-xPb $(Zn_{0.4}Ni_{0.6})1/3Nb_2/3O_3$ ceramics near triple point", J. Am. Ceram. Soc., 98, 2887 (2015).   DOI
58 Y.-S. Cho, S.-Y. Choi, Y.-K. Kim, and G.-R. Yi, "Bulk synthesis of ordered macroporous silica particles for superhydrophobic coatings", J. Colloid Interface Sci., 386, 88 (2012).   DOI
59 B. Yuan, H. Wu, X. Sun, G. Wang, and H. Li, "Fabrication of porous alumina green bodies from suspension emulsions by gelcasting", Mater. Lett., 81, 151 (2012).   DOI