• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.326-328
• /
• 1993

Modelling theory, based on differential equations, is not an adequate tool for solving the problems of complex system. Identification of complex system using GMDH(group method of data handling) is more appropriate for this problems. In this paper, GMDH algorithm is used to identify the nonlinear plant and to design model following nonlinear control system. Simulation for the DC motor show the good performance of model following nonlinear control system.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.139-141
• /
• 1995

In this paper, we proposed digitalized low cost data logger system. In the past, data logger system which use analog method had many problems, inconvenience of measurement, unsatisfied accuracy, and had difficulty in storing data. Proposed system overcome these problems by using one-chip microcontroller which detects abnormal satus and saves it in RAM card. Saved data are transmitted to personal computer by serial communication port and by parallel interface card. Field experiment results validate the performances of the proposed system.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.119-121
• /
• 1997

This paper suggests a design method of the robust model following PD control system using genetic algorithm. This PD control system is designed by applying genetic algorithm with reference model to the optimal determination of proportional and derivative gains that are given by PD servo controller. These proportional and derivative gains are optimized simultaneously in the search domain guaranteeing the robust stability of closed-loop system satisfying different stability margins. The effectiveness of this PD control system is verified by computer simulation.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.356-360
• /
• 2009

A novel method to derive a Nominal States Relationship (NSR) of a control system is proposed. The obtained relationship is used to design a sliding surface which can have the characteristic of a nominal system. With this sliding surface, a Sliding Mode Control (SMC) system which has the characteristics of the nominal system controlled by pole placement is designed for an uncertain system.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.313-316
• /
• 2002

The need to protect a main information and control a personal access using Biometrics in the intelligent building system is extended with growing the information and communication technologies in recent years. The fingerprint recognition technology is one of the biometrics methods available that has been widely used in various applications. But the present architecture of fingerprint recognition system has many of the problems because of centralized control network architecture. But we can solve the problems with distributed control network architecture. In this paper, the fingerprint recognition system uses the merit of the LonWorks. it is able to easily modularize the system and make up for the weak points in the typical fingerprint recognition system.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.190-197
• /
• 2002

The goal of this paper is to propose a virtual instrumentation system based on three dimensional current coordinates for monitoring power quality. A developed system with various experimental graphic screens and numerical results is made up 586-PC and DSP(digital signal processor) board, power quality analyzing and evaluating software for windows. Power parameters are analyzed using correlation signal processing techniques based on the correlation between voltage and current waveforms. Analysis results are visualized by 3-D current coordinates, and it is compared and evaluated with conventional time/frequency domain. To verify the validity of the proposed system, power and harmonic parameters of single phase induction motor drive system is analyzed and verified.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.128-130
• /
• 2001

This paper proposes the design of LQ-PSS(linear quadratic power system stabilizer) for improving power system stability using genetic algorithm(GA). We are tuned weighting matriecs of LQ-PSS using GA. To evalute the usefulness of the proposed method. we performed the nonlinear simulation on a single machine infinite system. As results of the simulation. the proposed method shows the better control performance than CPSS(conventional power system stabilizer) in trems of settling time and damping effects.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2556-2558
• /
• 2002

In this paper, the design guideline of communication interrace module for home-appliances is proposed. The requirements of the interface between white-goods and communication module are analyzed. Finally, the proposed interface structure is implemented using PLC technology.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.151-152
• /
• 2006

Multi-hop system has advantage of low power consumption, improved cell capacity, and enlarged service coverage. Most of previous researches show that multi-hop relaying beyond dual-hop relaying does not improve system performance significantly. This leads most researches are focused on dual-hop relaying system. In this paper, we propose an optimal boundary condition to support maximal data rate for fluctuation of traffic load in single cell dual-hop relay system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.78-83
• /
• 2006

In this study, we analyzed the influence or electrical pole by FEM(Finite Element Method) and developed protective system by designing and interpreting protective system for electrical pole when abnormal strength worked on messenger wire. Protective system did not shed messenger wire under wind pressure and discontent load but did assign a part to preventing rupture of electrical pole through automatically shed messenger wire over fred strength. Structure of protective system analysis by FEM and prove property by measuring tensile strength for practical product.