• 제목/요약/키워드: electrical resistivity change

검색결과 248건 처리시간 0.022초

문턱스며들기 이하 카본블랙 충진 폴리에칠렌기지 복합재료의 전기전도 특성 (Electrical Conduction Property of the Carbon Black-Filled Polyethylene Matrix Composites Below the Percolation Threshold)

  • 신순기
    • 한국재료학회지
    • /
    • 제20권5호
    • /
    • pp.271-277
    • /
    • 2010
  • In this paper two aspects of the percolation and conductivity of carbon black-filled polyethylene matrix composites will be discussed. Firstly, the percolation behavior, the critical exponent of conductivity of these composites, are discussed based on studying the whole change of resistivity, the relationship between frequency and relative permittivity or ac conductivity. There are two transitions of resistivity for carbon black filling. Below the first transition, resistivity shows an ohmic behavior and its value is almost the same as that of the matrix. Between the first and second transition, the change in resistivity is very sharp, and a non-ohmic electric field dependence of current has been observed. Secondly, the electrical conduction property of the carbon black-filled polyethylene matrix composites below the percolation threshold is discussed with the hopping conduction model. This study investigates the electrical conduction property of the composites below the percolation threshold based on the frequency dependence of conductivity in the range of 20 Hz to 1 MHz. There are two components for the observed ac loss current. One is independent of frequency that becomes prevalent in low frequencies just below the percolation threshold and under a high electrical field. The other is proportional to the frequency of the applied ac voltage in high frequencies and its origin is not clear. These results support the conclusion that the electrical conduction mechanism below the percolation threshold is tunneling.

전기비저항 탐사를 이용한 매립지의 재주입 침출수 모니터링 (Monitoring of Reinjected Leachate in a Landfill using Electrical Resistivity Survey)

  • 이철희;전수인;김영규;김원기
    • 지구물리와물리탐사
    • /
    • 제27권3호
    • /
    • pp.159-170
    • /
    • 2024
  • 매립된 폐기물의 빠른 분해 및 안정화를 위해 매립지에 침출수를 재주입하는 바이오리액터 공법은 많은 장점을 가지고 있어, 여러 매립지에서 시도되고 적용되고 있다. 매립지에 바이오리액터 공법을 성공적으로 적용하기 위해서는 주입된 침출수의 거동 특성을 파악하는 것이 중요하다. 본 논문에서는 바이오리액터 공법이 적용된 국내 매립장에서 침출수 거동을 파악하기 위해 전기비저항 모니터링을 수행하였다. 전기비저항 모니터링은 침출수가 주입되기 전인 2013년 8월에 기준 탐사를 수행하였고, 이후 주입에 따른 시간 경과 모니터링 탐사를 4회 수행하였다. 전기비저항 모니터링 결과로부터 침출수 주입에 따른 매립지 전기비저항 감소를 확인하였고, 시간에 따른 변화양상을 파악하였다. 또한, 전기비저항 변화비를 새롭게 정의하고 적용함으로써 침출수의 시간에 따른 공간적 분포 및 거동을 효과적으로 파악하였다. 향후에는 자료획득 최적화 연구와 다양한 기법들을 활용한 복합 모니터링 연구가 추가로 진행되어야 할 것으로 판단된다.

원심모형실험을 위한 전기비저항 탐사 시스템 구축 (Development of Electrical Resistivity Survey System for Geotechnical Centrifuge Modeling)

  • 조형익;방은석;이명종;추연욱;김동수
    • 한국지반공학회논문집
    • /
    • 제30권10호
    • /
    • pp.19-31
    • /
    • 2014
  • 원심모형실험 중 지반모형의 상태 변화를 입체적으로 파악하기 위한 방법으로 전기비저항 탐사를 시도하였다. 탐사 시스템은 현장에서 널리 사용되는 검증된 상용 장비를 바탕으로 하였다. 컴퓨터 원격 조정으로 실험 시설 내에 설치된 탐사 장비를 통제하고 실시간 해석을 통해 결과 영상을 원심 모형실험 중에 바로 확인할 수 있도록 구성하였다. 구축된 탐사 시스템의 안정적 구동 여부를 점검하기 위해 불포화상태로 조성된 모형 지반 상단에 염수를 떨어뜨려 지반 내부로 이동하게 하고 전기비저항 탐사를 수행하였다. 10g로 원심력을 가한 상태에서 실험을 수행하고 시간대별 염수 침투상황을 전기비저항 영상으로 확인하였으며 일반 중력장에서 동일하게 실험한 결과와 비교하였다. 실험 종료 뒤 모형지반 수직 절단면을 이용하여 직접 측정한 전기비저항 값과 획득한 영상을 비교함으로써 신뢰성을 검증하였다.

Bottom Ash의 전기적 특성과 일축압축강도 (The Electrical Properties and Unconfined Compression Strength of Bottom Ash)

  • 김태완;손영환;박재성;노수각;봉태호
    • 한국농공학회논문집
    • /
    • 제56권1호
    • /
    • pp.21-30
    • /
    • 2014
  • The objective of this study is to find the electrical properties of Bottom ash from thermoelectric power plants in Korea. By using Parallel Plate Method, the electrical resistivity and dielectric constant were measured at the frequency from 20 Hz to 10 MHz. Also, unconfined strength test, XRF and sieve analysis were performed for finding the relationship between strength, physiochemical properties and electrical properties. In the result, the change of electrical resistivity and dielectric constant of bottom ash against frequency was similar to that of general soil. The proportion of fine grain in bottom ash had the positive correlation with dielectric constant and negative correlation with electrical resistivity. Chloride and sulfur trioxide were proportional to dielectric constant and the more bottom ash had chloride content, the lower electrical resistivity appeared in bottom ash. Unconfined strength of bottom ashes had a range from 200 kPa to 780 kPa and strength was inverse proportional to electrical resistivity.

임계점 부근에서 LCMO의 전도 특성에 대하여 (A Study on the Conducting Behavior of La-Ca-Mn-O in the vicinity of Phase Transition Temperature)

  • 송하정;김우진;권순주
    • 한국자기학회지
    • /
    • 제8권4호
    • /
    • pp.179-184
    • /
    • 1998
  • 일반적으로 페로브로스카이트 구조의 망간 산화물에서 많이 관찰되어온 초거대 자기 저항 현상은 임계점 (큐리온도) 부근에서 온도 변화에 의한 상자성-강자성 상전이와 동반한 전기 전도 기수 변화에 따른 급격한 저항 변화와 매우 밀접한 광계가 있다. 본 논문에서는 이러한 전기 저항-온도 거동을 모사하기 위해, 온도에 따른 상분율 변화 함수를 유효매질 이론(effective media theory)을 이용하여 모형식을 마련하엿다. 미 모형식은 실제 La0.7Ca0.3MnO3의 저항-온도 거동을 매우 정확하게 모사하였다.

  • PDF

시험탐사 결과에 따른 전기비저항 탐사 분석 (Resistivity Protecting analysis due to test survey result)

  • 김재홍;홍원표;박철숙;임은상
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.1285-1289
    • /
    • 2008
  • Increasing the flood control capacity's link that is enforcing to existing dam by unusual change of weather, While build planing construction by exiting spillway of tunnel type to dam, could know that part bed rock is formed as is different with design. Grasped topography of research area and geology state to definite distribution aspect of different bed rock, Place that achieved Surface geological Survey and correct Survey is difficult in some section enforced Electrical resistivity dipole-dipole investigation. Grasped stratigraphy distribution confirmation and fracture or weathering zone making out siding 2D-Resistivity Electrical resistivity diagram and Reverse analysis diagram, examining closely soil weathered rock rock's distribution state, established stability countermeasure plan

  • PDF

전기비저항, 바크하우젠노이즈 및 탄화물 분석법을 이용한 2.25Cr-1Mo 강의 열화도 평가 (Evaluation of degradation in aged 2.25CrMo steel by electrical resistivity, magnetic Barkhausen noise and carbide analysis)

  • 변재원;표승우;권숙인
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집A
    • /
    • pp.210-215
    • /
    • 2001
  • The ferritic 2.25CrMo steel has been used for high temperature structure applications such as turbine rotors, boilers and pressure vessels in fossil plant and petroleum chemical facilities. However, this steel is known to result in aging degradation due to temper embrittlement, carbide induced brittleness and softening of matrix after long time exposure to high temperature. This research investigated the microstructural and mechanical changes after artificial degradation treatment and evaluated the degree of degradation by several nondestructive methods. The decrease of electrical resistivity and increase of magnetic Barkhausen noise(RMS voltage) with increasing aging time were observed. The change of electrical resistivity and Barkhausen noise showed a good correlation with the ductile-brittle transition temperature.

  • PDF

Effect of Thermal Annealing on the Electrical Properties of In-Si-O/Ag/In-Si-O Multilayer

  • Yu, Jiao Long;Lee, Sang Yeol
    • Transactions on Electrical and Electronic Materials
    • /
    • 제17권4호
    • /
    • pp.201-203
    • /
    • 2016
  • Transparent conductive multilayers have been fabricated using transparent amorphous Si doped indium oxide (ISO) semiconductors and metallic Ag of ISO/Ag/ISO. The resistivity of a multilayer is dependent on the middle layer thickness of silver. The thickness of the Ag layer is fixed at 11 nm and takes into account cost and optical transmittance. As-deposited ISO/Ag (11 nm)/ISO multilayer shows a measured resistivity of 7.585×10−5 Ω cm. After a post annealing treatment of 400℃, the resistivity is reduced to 4.332×10−5 Ω cm. The reduction of resistivity should be explained that the mobility of the multilayer increased due to the optimized crystalline, meanwhile, the Hall concentration of the multilayer showed an obscure change because the carriers mainly come from the insert of the Ag layer.

매트릭스 강도, 섬유 형식 및 보강량에 강섬유 보강 시멘트 복합재료의 인발시 전기저항에 미치는 영향 (Effects of Matrix Strength, Fiber Type, and Fiber Content on the Electrical Resistivity of Steel-Fiber-Reinforced Cement Composites During Fiber Pullout)

  • ;김동주
    • 대한토목학회논문집
    • /
    • 제39권6호
    • /
    • pp.675-689
    • /
    • 2019
  • 자가응력 및 자가손상 감지능력을 모두 가지는 스마트 콘크리트의 개발은 아직까지 손상 감지 능력에 대한 원인 규명이 명확하지 않아 어려운 현실이다. 따라서, 본 연구에서는 매트릭스 강도, 섬유 형식 및 보강량이 강섬유 보강 시멘트 복합재료의 인발시 전기저항에 미치는 영향을 평가하였다. 실험으로부터 섬유와 매트릭스 사이 계면에서의 탈착으로 전기저항률이 감소한다는 사실을 알 수 있었다. 섬유와 매트릭스 사이 계면 부착강도가 높을수록 더 큰 전기저항률의 감소를 유발하였다. 따라서, 고강도 매트릭스, 황동 도금된 강섬유 그리고 변형된 강섬유를 사용시 높은 계면부착강도를 유발하고 그 결과 더 큰 전기저항률 감소를 유발하였다.

사질토 간극수의 이온 성분들에 따른 전기비저항값의 변화 (Variation of the Electrical Resistivity with ion Components of Pore Water in the Sand)

  • 유찬;윤춘경;이영남;이용길
    • 한국지반공학회논문집
    • /
    • 제15권1호
    • /
    • pp.185-196
    • /
    • 1999
  • 실내실험에 의하여 사질토 간극수의 이온 성분들사이 관계를 규명하기 위하여 흙의 비저항측정 상자와 STING-Rl비저항 측정기를 이용하여 분석을 수행하였다. 실험은 이온성분들의 농도를 변화시키면서 실시하였다. 또한 2~3가지 성분을 혼합한 경우에 대해서도 비저항값의 변화를 측정하였다. 실험결과는 성분중에서 비소(As)의 비저항값의 감소가 가장 컸으며, 나머지 성분들은 일반성분들과 큰 차이를 보이지는 않았다. 또한 혼합성분의 경우에는 비저항값의 범위가 간극수에 포함된 성분들의 비저항값에 따라 달라지는 것으로 나타났다.

  • PDF