• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.53-55
• /
• 2008

In high speed applications, the slotless permanent magnet(PM) motors appear an attractive solution, being almost insensitive to magneto-motive force harmonics and to pulse width modulation(PWM) current ripple and exhibiting lower stator iron losses and rotor losses (significant with square wave current control). So, this paper deals with methods for design of permanent magnet synchronous motor/generator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.113-118
• /
• 2010

In This Paper, at the PSPICE model is presented by Piezoelectric Transformer and CCFL and equivalent circuit of fluorescent light. Highly effective fluorescent light release for next generation is developed for 35W supremacy model three wave length T5 fluorescent lamps. Lighting a candle experiment of T5 fluorescent lamps is carried out by employing Piezoelectric Transformer power-factor improvement circuit and inverter. PLL method is used for supplying a correct frequency of Piezoelectric Transformer operating.

• Applied Science and Convergence Technology
• /
• v.25 no.2
• /
• pp.36-41
• /
• 2016

Similarity and diversity of various quantum ring structures are investigated by classifying energy dispersions of three different structures: an electrostatic quantum ring, a magnetic quantum ring, and a magnetic-electric quantum ring. The wave functions and the eigenenergies of a single electron in the quantum ring structures are calculated by solving the Schrdinger equation without any electron-electron interaction. Magnetoconductance is studied by calculating a two-terminal conductance while taking into account the backscattering via the resonance through the states of the quantum rings at the center of a quasi-one dimensional conductor. It is found that the energy spectra for the various quantum ring structures are sensitive to additional electrostatic potentials as well as to the effects of a nonuniform magnetic field. There are also characteristics of similarity and diversity in the energy dispersions and in the single-channel magnetoconductance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.779-786
• /
• 1986

Hot-wire anemometer with constant temperature hot-wire anemometer bridge, linearizer, D.C. stabilization electric power source and square-wave generater has been constructed for trial and the test has been carried out. As a result the test showed the overall frequency response of 6KHz over the change of air flow and the noise of approximately 1cm/s in an air flow of 10m/s. The accuracy of the lienarizer stands comparison with the existing anemometer and turned out to be relatively good operational characteristics.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.1
• /
• pp.26-31
• /
• 2011

Numerical modeling is used to investigate the perturbation of a single Langmuir probe (0.2 mm diameter shielded with 6 mm insulator) inserted along the center axis of a cylindrical inductively coupled plasma chamber filled with Ar at 10 mTorr and driven by 13 MHz. The probe was driven by a sine wave. When the probe tip is close to a substrate by 24.5 mm, the probe characteristics was unperturbed. At 10 mm above the substrate, the time averaged electric potential distribution around the tip was severly distorted making a normal probe analysis impossible.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.766-768
• /
• 1988

Electron mobility which is a basic parameter to represent gas state, is calcurated using equation assumed Lorentz gas. This equation is applied to 30mm 20W fluorescent lamp. In order to obtain electric field strength of positive column, lamp and cathode fall voltage wave form is measuread using indirect voltage measuring methode. To obtain electron density, used the calculation of S.C Peek and D.E Spencer. The result which is applaied 38mm fluorescent lamp at 400mA, $20^{\circ}C$ is displayed.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.250-257
• /
• 2000

The feasibility of synthesizing SiC-AlN solid solution by field-activated combustion synthesis was demonstrated. At lower fields of 8-16.5V/cm, composites of AlN-rich and SiC-rich phases were synthesized, but at fields of 25-30 V/cm, the product was a 2H structure solid solution. Combustion synthesis of the solid solution by nitridation of aluminum with silicon carbide under a nitrogen gas pressure of 4-8 MPa was also investigated. The maximum combustion temperature and wave propagation velocity were found to be influenced by the electric field in the field-activated combustion synthesis, and by the green density and nitrogen pressure in the combustion nitridation. In both cases the formation of solid solutions is complete within seconds, considerably faster than in conventional methods which require hours.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.7
• /
• pp.412-417
• /
• 2000

This paper offer fundamental materials about Partial Discharge(PD) detection by electromagnetic waves. All spectrum data-usually used as grape- can be used as numbers. And then the average of background noise spectrum strength was made. Average value subtract from every data. Then average value appeared, graphed. The graph was compared with the magnitude of charge. The shape of changes is similar, and the change of electric field strength could be seen in one sight. When the magnitude of charge is over than 100[pC], antenna can detect partial discharge. So this method will be very useful to diagnosis of insulation. It the performance of the antenna used in this experiment is analyzed, good results can be obtained.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.10
• /
• pp.481-486
• /
• 2003

It is well known that a discharge in oil is the source of various physical phenomena. Ultrasonic-wave detection is a useful method to the diagnosis of the transformer-insulation condition. Conventionally, ultrasonic waves are detected by Piezo-electric transducer, and we use optical method that has many advantages. In this paper, we constructed a Mach-Zehnder interferometer with optical fiber and investigated the principle of operation. Test arrangement is based on the needle-plane electrode system in oil and applied AC high voltage. Ultrasonic waves were detected and analyzed with wavelet transform.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.305-307
• /
• 2001

In this paper, the household AC power line network is characterized for the low bit rate power line communication (PLC) in the frequency range from 10kHz to 450kHz. Various types of electric apparatus and the power lines constitute the network topology, and the PLC channel transfer function and the channel impedance are derived based on the constructed network topology. The channel characteristics derived with the lumped circuit model and the distributed circuit model are compared using the computer simulations. The effect of the wave reflection and signal distortions are also investigated.