• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1453-1454
• /
• 2007

A street light is an electrical equipment to improve the traffic safety and the security for people in night. However, many accidents due to electric shock have happened in recent, people were interested in the safety of electrical facilities. And people want to know the danger by touch and step voltages. When the electric power lines fall down on the ground, the fault current flows to ground rod and the potential near the ground rod is increased to induce the high touch and step voltages. In this paper, we installed different ground rods with a street light and investigated the electrical potential according to ground methods and the types of ground rod. Finally, we examined the electrical facilities with the experimental result and present the improved technical data for the safety from electric shock

• 에너지공학
• /
• 제19권2호
• /
• pp.92-102
• /
• 2010

플러그인 하이브리드 전기자동차(Plug-in Hybrid Electric Vehicle, PHEV)는 하이브리드 전기자동차(Hybrid Electric Vehicle, HEV)의 일종으로, 배터리 용량을 HEV보다 더욱 증대시키고 배터리의 충전을 전력망으로부터 할 수 있도록 한 자동차이며, 순수 배터리 전기자동차(Plug-in Battery Electric Vehicle, PBEV)는 전력망으로부터 전기를 배터리에 충전하여 저장하고 배터리에 저장된 전기만을 이용하여 운전가능한 자동차이다. 최근에 PHEV와 PBEV에 대한 관심과 개발이 전세계적으로 급속하게 증가하고 있다. 그러므로 이들 전력망 충전식 전기자동차가 전력망의 전력수요에 미치는 영향을 검토하는 것이 중요하다. 본 논문에서는 이들 PHEV와 PBEV 자동차의 보급으로 전력망의 전력수요, 이산화탄소 배출량과 차량구매자의 관점에서 운전비용에 미치는 영향을 분석하였다. 2020년경에 차량보급이 10%정도로 이루어질 것을 가정하여 영향을 분석하였다.

• 멤브레인
• /
• 제13권1호
• /
• pp.37-46
• /
• 2003

하전된 멤브레인 미세기공으로 유체가 흐르는 경우는 계면동전기 효과가 작용하게 된다. 비선형 Poisson-Boltzmann 전기장과 흐름에 의해 유발되는 전기장 사이의 정전상호작용을 운동방정식의 외부작용 힘으로 고려하였다. 유한차분법으로 정전위 분포를 우선 산출하고, 이어서 Green 함수로 슬릿형 기공에 대한 Navier-Stokes 식의 해석해를 구하였다. 계면동전기적 유동에 의한 흐름전위를 관련된 물리화학적 인자들의 함수로 유도되는 해석적인 명확한 표현으로 제시하였다. 전기이중층, 표면전위, 그리고 기공벽면의 하전조건의 영향에 따른 유속분포와 흐름전위 변화를 고찰하였다 계산결과, 전기이중층 두께나 표면전위가 증가함에 따라 평균유속은 감소하는 반면에 흐름전위는 증가하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.18-23
• /
• 2009

After the installation of electric cables at block, PE(pre-erection) and hull stages, the coating stains on the electric cable sheath were unavoidably occurred by additional painting process. According to class rules paint or coating applied on the electric cables shall not adversely affect the mechanical, chemical of fire resistant characteristics of the electric cable sheath. However, there has not been quantitatively studied about the effect of coating stains on properties of sheath materials. In this study, we tried to investigate the effect of coating stains on the performance and deterioration of sheath materials by using FTIR, SEM analysis, flame retardant, high potential voltage and tensile test. The results sowed that coating stains, which were occurred during painting work on site could not adversely affect on the performance and deterioration of sheath materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.466-467
• /
• 2008

In case of a line-to-ground fault at transmission lines, a portion of fault current will flow into the earth through the footings of the faulted tower causing electrical potential rise nearby the faulted tower footings. In this situation, any buried pipelines or structures nearby the faulted tower can be exposed to the electrical stress by earth potential rise. Although many research works has been conducted on this phenomena, there has been no clear answer of the required separation distance between tower footings and neary buried pipeline because of its dependancy on the soil electrical charactersics of the concerned area and the faulted system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.21-23
• /
• 1999

In this paper, the analysis of the electric field in the chamber of high voltage $SF_6$ GCB(Gas Circuit Breaker) is presented by using C-1 FEM. For this purpose, pre-processing program and post-processing program were developed for axisymmetirc 3 dimensional analysis and the electric field in cylindric chamber was analyzed. Important problem is that electric analysis must be considered coronal due to break-down of $SF_6$ when it is cutted off. To solve this problem, a procedure is needed to verify that the solution of Poisson's equation for scalar potential satisfy charge continuos condition because of using first order element os not satisfy the electric continuous condition, C-1 FEM is introduce to obtain electirc potential and electric field at the same time. Analysis of the distribution of electric field on model was done. It is confirmed that the developed program in this paper applicable to design and to analyze of characteristics in total program as electric characteristics analysis routine.

• Journal of Acupuncture Research
• /
• 제21권6호
• /
• pp.111-120
• /
• 2004

Objective : Assuming that the characteristic of meridian system has been similar to this of electric potentials in human body and that measurements of electric potential at well(井穴) and sea (合穴) points in branches of the twelve meridians(WSBTM) will be representative of measurements of the twelve meridians, to measure the electric potentials of 13 patients with Facial Hemiparalysis (구안와사<口眼蝸斜>, FH), to find out the characteristic of meridian system in patients with AK. Methods : Electric potentials of well and sea points in the meridians in twenty one patients with the pain in the lion diagnosed as FH were repeatedly measured by physiograph(PowerLab). Measurements of those electrical potentials were analyzed by factor analysis. Results : The electric potentials of WSBTM at the left side were divided into five factors. On the other hand those at the right side Were divided into four factors. Conclusions : In conclusion, their electrical potentials at the left and right side were each other five and four factors. Thus electrical potentials of well and sea points might be the representative meridian to show their characteristics.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.73-79
• /
• 2006

Conceptually, mechanical port of an electric machine can be doubled and the concept of dual-mechanical-port (DMP) will then give birth to a new breed of electric machines. In this paper, the various possible structures of DMP electric machine are discussed. Basic modeling and analysis issues related to the DMP electric machine are presented. An exemplary design of DMP machine is given and verified by FEM results. Potential applications and future research work are given to conclude the paper.

• 기술사
• /
• 제42권6호
• /
• pp.36-41
• /
• 2009

Smart Grid is grafting IT(information technology) techniques on existing electric power network, supplier and the consumer to do real-time exchange of information lead to both direction and energy efficiency optimization, it is a next potential electric power network method. Because of applying various distributed electric power sources, the electric power network system will follow in size and it is dispersive and it will operate independently, and it become the intelligent electric power network, which in consumer demand reacts at real-time, because of using various sensors. In this article explain concept, features, and contemporary background of Smart Grid, and describe improve reliability of the electric power quality.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1427-1434
• /
• 2017

Since the late 2000s, there has been growing preparation in South Korea for a sudden reunification of South and North Korea. Particularly in the power industry field, thorough preparations for the construction of a power infrastructure after reunification are necessary. The first step is to estimate the peak load demand. In this paper, we suggest a new peak demand estimation methodology by integrating existing correlation analysis methods between economic indicators and power generation quantities with a power supply interruption model in consideration of power consumption patterns. Through this, the potential peak demand and actual peak demand of the Nation, which experiences power supply interruption can be estimated. For case studies on North Korea after reunification, the potential peak demand in 2015 was estimated at 5,189 MW, while the actual peak demand within the same year was recorded as 2,461 MW. The estimated potential peak demand can be utilized as an important factor when planning the construction of power system facilities in preparation for reunification.