• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.683-686
• /
• 2001

Electrochemically active lithium nickel cobalt oxide thin-film was not fabricated until now. The thin-film was deposited by RF magnetron sputtering at room temperature, and its initial phase was amorphous. By varying deposition condition, the different characteristics of thin-film were achieved. Using electrochemical analyses, the relationship between physical and electrochemical characteristics was identified. Crystallized thin-film by RTA (Rapid Thermal Annealing) was shown a good capacity and cycle property.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.02a
• /
• pp.169-169
• /
• 2007

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.997-1000
• /
• 2001

Pb(Zr$\sub$0.52/Ti$\sub$0.48/)O$_3$(PZT) thin films have been prepared by rf-magnetron sputtering methods and investigated the structural and electrical properties. In order to investigate the effects of sputtering conditions, input power was controlled during deposition. Crystallization process and microstructure of PZT thin films were largely affected by input power. Highly crystallized PZT films with the perovskite structure were successfully obtained on Pt/Ti bottom electrode. The dielectric constants and polarization of PZT thin films were increased with increasing input power, and the coercive electric field was decreased with increasing input power . The dielectric constant of PZT thin films with input power 150 W was 966 at 1 kHz. we, authors, proposed that preferred orientation of PZT thin films were controlled by input power in sputtering methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.135-138
• /
• 2001

We report the structural ,optical and electrical properties of ZnO thin films depending on the variation of the film thickness. The properties of the films deposited on sapphire (001) substrates using a pulsed laser deposition technique (PLD) were characterized with XRD, hall measurement and photoluminescence (PL). In our study, the increase of the thickness of ZnO thin films shows the improvement of the structural and optical properties. The electric properties of the films were also well matched with the structural and optical properties

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.167-170
• /
• 1998

The electrical characteristics of Stearic acid LB films were investigated to develop the gas sensor using Langmuir-Blodgett(LB) films. The deposition status of LB films were verified by the measurements of UV absorbance and I-V characteristics. The conductivity of Stearic acid LB films at room temperature was $10^{-8}[S/cm]$, which is typical of semiconductor. The conductivity was found to increase as the temperature was increased. The acitivation energy was about 1[eV].

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1081-1086
• /
• 2005

Dynamic behavior of carbon nanotubes (CNTs) in an electric field is directly observed by in-situ transmission electron microscopy (TEM). The CNT field emitters examined by in-situ TEM are multiwalled, double-walled and single walled CNTs. Threshold fields for electron emission and sustainable emission currents depending on the structure of CNTs are presented, and degradation mechanism of the CNT field emitters is discussed. In addition to the microscopy studies on individual CNTs, our recent development in surface treatment of CNT layers grown by chemical vapor deposition, which brings about high density of emission current and high uniformity, is also presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1470-1473
• /
• 2005

We proposed new triode-type Field Emitter Arays using Carbon NanoTubes(CNT-FEAs) as electron emission sources at low electric fields. The CNTs were selectively grown on the patterned catalyst layer by Plasma-Enhanced Chemical Vapor Deposition (PECVD). In this structure, gate electrodes are located underneath the cathode electrodes and extracted gate is surrounded by CNT emitters. Furthermore, in order to control density of CNTs, we investigated effect of using rapid thermal annealing (RTA).

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.33-36
• /
• 2009

In this paper, evaluation of physical properties was made for dielectric relaxation phenomena by the detection of the surface pressures and displacements current on the monolayer films of fatty acid monomolecular Arachidic Acid, Stearic Acid using compressing velocity. LB(Langmuir-Blodgett) thin films were manufacture by detecting deposition for the accumulation and the current was measured after the electric bias was applied across the manufactured MIM device. The physicochemical properties of the fatty acid monomolecular Arachidic Acid, Stearic Acid films surface structure has been studied by AFM. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is gas state, liquid state, solid state. Formation that prevent when gas phase state and liquid phase state measure but could know organic matter that molecules form equal and stable film when molecules were not distributed evenly, and accumulated in solid state only.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.489-490
• /
• 2008

As anodizing method using poly-Si (polycrystalline silicon) grown by LPCVD (Low Pressure Chemical Vapor Deposition), a ballistic electron emitter was made. An OPPS (Oxidized Porous Poly-Si) structure can generate ballistic electron which can pass through without scattering owing to electric field of oxide layer wrapped around nanocrystal due to applied voltage of between surface and bottom electrode. As electrode, (Al, Au and Pt/ti) were used. In this case, there were the better characteristics in Al and Pt/ti than in Al and Au.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.477-484
• /
• 2000

Microcontamination caused by particle deposition on the head disk interface threatens the reliability of hard disk drive. Design of slider rail to control contamination becomes an important issue in magnetic recording. In this paper, how particles adhere to the slider and the disk is examined. To investigate accumulation mechanism of the particles, trajectory of the particles in a slider/disk interface is simulated with considering various forces including drag force, gravitational force, Saffman lift force, and electrostatic force. It is found that the charged particles can easily adhere to the slider or disk surface, if an electric field exists between the slider and the disk. It is supposed that the vertical motion of the particles should be related with not only Saffman force but also electrostatic force.