• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.756-761
• /
• 2008

In this paper, silver slit yarns combined with cotton yarns were used to produce weft knits. The purpose of this study was to investigate the physical properties as well as the functional properties of weft knit with silver slit yarns. The six different weft knit fabrics were made from silver slit yarns varying knit structure and fabric density. One cotton weft knit was also knitted to compare the properties. Weft knits made from silver slit yarns were characterized by excellent antibacterial properties, electric magnetic shielding properties, UV-cut properties, anti-static properties, and air permeability. Although there were significant differences in the physical properties of different knit structure and the fabric density, weft knits with silver slit yarns were seen to have better end use properties and ideal for apparel than the cotton weft knits.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1602-1604
• /
• 2000

When insulators are operated near cement factories, some amount of cement powder may be stuck on the surface of insulators and decreases their electrical performances. Three kinds of insulators, such as, silicone EPDM and porcelain insulators, are tested in this paper. Testing Voltage of 25kV is applied to the samples, and surface leakage current is measured for 6 months after cement solvent of 10 vol% was stuck on the surface of each insulator in the laboratory. Insulation layers are cut from 3 and 6 month-aged insulators and tested for ac breakdown, impulse breakdown, contact angle. After aging, electrical properties are unchanged in silicone and EPDM insulators but show some changes in porcelain insulators.

• 전기화학회지
• /
• 제15권3호
• /
• pp.115-123
• /
• 2012

리튬이차전지의 수요가 소형 휴대용 전자기기에서 중대형 전기자동차와 에너지저장장치로 변화함에 따라, 요구되는 전지 특성도 크게 달라지고 있다. 10년 이상의 장기 신뢰성, 팩 수준의 안전성, 가격 경쟁력 확보 등 기존 소형 전지보다 크게 강화된 요구 조건뿐만 아니라, 고출력 특성도 함께 필요로 한다. 그런데, 출력을 측정하기 위해서는 전압과 전류가 동시에 측정 및 제어되어야 하기 때문에, 기존의 단위셀 용량 측정보다 훨씬 어렵다. 또한, 측정 방법의 선택뿐만 아니라 출력유지시간, 충전상태(State-of-Charge, SOC), Cut-off 조건, 측정온도 등의 측정 조건에 따라서도 그 측정값이 크게 달라지는 경향이 있다. 본 논문에서는 HPPC (Hybrid Pulse Power Characterization)법, J-pulse(Japan Electric Vehicle Association Standards, JEVS D 713)법, 정출력 측정법(Constant Power Measurement)의 측정 원리 및 실제 실험에 어떻게 적용해야 하는지 설명하고, HEV(Hybrid Electric Vehicle)용 단위셀을 이용해 출력법간 측정 결과를 비교 분석한다.

• 한국자기학회지
• /
• 제27권2호
• /
• pp.49-53
• /
• 2017

THz 대역 전파흡수체를 구현하기 위해 split cut wire(SCW)와 배면 도체로 구성되는 단위 셀 구조를 제안하였다. 배면이 금속으로 단락된 유전체 기판 상에 SCW가 배열된 메타소재에서 SCW의 길이와 폭을 조절하여 THz 대역에서 완전 전파흡수체(5.5~6.0 THz에서 반사손실 -20 dB 이하)의 구현이 가능하였고, 인덕턴스-커패시턴스 (L-C) 공진기 회로이론으로 이를 설명하였다. 길이가 서로 다른 두 개의 SCW를 하나의 단위 셀 안에 같이 배치함으로써 두 개의 흡수 피크를 얻을 수 있었다. SCW 간의 간격이 넓어짐에 따라 두 번째 공진주파수는 거의 변화가 없지만 첫 번째 공진주파수는 저주파로 이동하면서 반사손실 값이 현저히 감소하는 경향이 나타났다.

• Current Photovoltaic Research
• /
• 제9권2호
• /
• pp.31-35
• /
• 2021

Shingled module shows high ratio active area per total area due to more efficient packing without inactive space between cells. The module is fabricated by connecting the pre-cut cells into the string using electrically conductive adhesives (ECA). ECAs are used for electric and structural connections to fabricate the shingled modules. In this work, we investigated a correlation between ECA peel strength and the efficiency of pre-cut 5 cells module which are fabricated according to ECA interconnection conditions. The curing conditions are varied to determine whether ECA interconnection properties can affect module properties. As a result of the peel test, the highest peel strength was 1.27 N/mm in the condition of 170℃, the lowest peel strength was 0.89 N/mm in the condition of 130℃. The efficiency was almost constant regardless of the curing conditions at an average of 20%. However, the standard deviation of the fill factor increased as the adhesive strength decreased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.256-259
• /
• 2008

An micro-probe tip must be manufactured using thin film to evaluate integrity of the semiconductor with narrow distance between pads. In this study, fatigue tests were performed for BeCu thin film which is used in micro-probe tip of semiconductor test machine. The thin film was manufactured by electro plating process, and the specimens were fabricated by wire-cut electric discharge method to make hour glass type specimen of $5000{\mu}m$ width, $29200{\mu}m$ length and $30{\mu}m$ thickness. The fatigue test of load control with 10Hz frequency was performed, in ambient environment. The fatigue cycles were tension-tension with mean stress, at stress ratio, R=0.1.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.507-512
• /
• 2001

In this work, tool holder system has been designed and builted to measure cutting forces in diamond turning. This system design includes a 3-component piezo-electric tranducer. Initial experiments with tool holder system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Tool holder system is modeled by considering the element dividing, material properties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of structure is simulated by MSC/NASTRAN, for the purpose of developing the effective design. Many cutting experiments have been conducted on 6061-T6 aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool force. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.938-941
• /
• 2001

A tool holder system has been designed and builted to measure cutting forces in diamond turning. This system design includes a 3-component piezo-electric tranducer. Initial experiments with tool holder system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. In this research, tool holder system is modeled by considering the element dividing, material properties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of structure is simulated by MSC/NASTRAN, for the purpose of developing the effective design. In addition, tool holder system is verified by vibration test using accelerometer. Many cutting experiments have been conducted on 6061-T6 aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool force. Cutting velocity has been determined to have negligible effects between 4 and 21㎧.(6) Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a sample model may not be sufficient to describe the forces produced in the diamond turning process.

• 한국산학기술학회논문지
• /
• 제18권9호
• /
• pp.61-67
• /
• 2017

프레스금형 제작 시 사용목적에 맞는 적합한 소재선택과 빠른 가공방법에 대한 연구는 금형제작시간을 줄이고 금형원가를 절감하는데 절대적으로 필요한 연구분야이다. 특히 장수명 프레스금형을 개발하기 위해선 열에 대한 고찰이 반드시 이루어져야 한다. 일반적으로 프레스금형의 주요부품 소재로는 Cr, W계 저합금 공구강, 고탄소 고크롬강, 고속도강 등 냉간 금형용 합금공구강이 많이 쓰이고 있다. 프레스금형부품을 가공하는 데는 주로 공작기계와 와이어 컷 방전가공을 사용하고 있다. 가공공정에 따라 금형부품의 가공시간 및 수명이 많은 차이가 난다. 밀링가공과 연삭가공으로 제작된 부품의 경우 제작시간과 비용은 많이 드는데 비해 금형의 수명이 길고 밀링가공과 와이어 컷 방전가공을 사용하면 제작시간과 비용은 절감되는 반면 금형수명은 줄어드는 현상이 나타난다. 따라서 본 연구에선 가공시간과 비용이 절감되는 가공방법으로 열처리를 사용하여 금형의 사용수명을 향상시키는 방법에 대해 고찰하고자 한다. 밀링가공-연삭가공, 밀링가공-와이어 컷 방전가공, 밀링가공-와이어 컷-고온템퍼링, 3가지 가공방법으로 시편을 제작하여 가공표면과 중심부를 SEM, EDS분석 및 표면조도분석으로 문제점을 고찰하였고 밀링가공-와이어 컷 방전가공-고온템퍼링의 가공방법으로 밀링가공-연삭가공과 동일한 금형의 수명을 만드는 방법을 도출하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.715-718
• /
• 2002

This paper investigated that resonant frequencies of microstrip patch antenna were agile when piezoelectric materials were used as the antenna substrates. When the bias is applied on them, thickness of the substrate is varied according. to the piezoelectric phenomenon. The microstrip patch antenna using Quartz substrate was fabricated and designed by Ensemble v 7.0 simulator. We fabricated the microstrip antennas using Quartz(Y-cut) as its substrate. When the operating frequencies of the microstrip antenna were 7.045GHz, 7.773GHz 8.18GHz the frequency shifts versus electric field, Emax=4[kV/cm], were 21MHz, 26MHz and 28MHz, respectively.