• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• 지구물리와물리탐사
• /
• 제12권2호
• /
• pp.183-191
• /
• 2009

탄성파 수치 모형 계산에 있어서 널리 사용되는 엇갈린 격자 방법이 아니라 회전된 엇갈린 격자 방법을 사용하여 탄성파 수치 모사를 수행하였다. 표준 엇갈린 격자 방법에서는 특별한 자유 경계조건을 적용하여야 하는 단점이 있지만 회전된 격자 방법에서는 물성으로 진공 또는 공기층을 부여함으로써 자유 경계조건을 실현가능하다는 것을 확인할 수 있었다. 파동전파에 있어서 유한 경계 조건에서 발생하는 인공 반사파를 제거하기 위해 PML (Perfectly Matched Layer)의 파동식 분해라는 단점을 극복할 수 있고 좋은 성능을 보이는 CPML (Convolutional Perfectly Matched Layer)법을 회전된 엇갈린 격자법(RSG: Rotatged Staggered Grid)에 적용하였다. 회전된 격자 유한 차분법에서 CPML의 고주파수 흡수 특성과 에너지 흡수율 조사, Cerjan법의 감쇠를 비교한 결과 흡수경계조건으로 좋은 성능을 확인하였다. 유체와 고체의 모형에 대한 경계에 대하여서도 매우 효과적으로 경계면에서 발생하는 반사파를 제거할 수 있음을 알 수 있었다.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.5-18
• /
• 1997

일반적으로 포화지반의 동적거동을 정확히 예편하기 위해서는 다공성(multi-phase) 재료모델과 그 모델을 이용하는 수치해석 프로그램의 개발이 필요하다. 본 논문에서는 높은 동하중을 받는 다공질 재료의 이론적인 거동해석 연구결과와 함께 기존 MPDAP(multi-phase dynamic analysis program)에 JWL(Jones-Withins-Lee) 모델을 삽입시켜 개발한 MPDAP에 대해 다루었다. JWL모델은 기존 모델과는 달리 폭약의 종류 및 특성 등을 고려할 수 있는 모델이다. 또한 본 논문에서는 개발된 프로그램의 적합성을 조사하기 위하여 몇몇 예제에 대한 검증해석을 수행하였다. 검증결과, 단일매체 (single-phase medium)에서의 탄성구형파의 전파특성 해석의 경우 해석결과와 이론해는 거의 일치하는 결과를 나타내었고, 일차원 선형 압밀해석의 경우과잉 간극수압은 Terzaghi의 이론해와 해석된 결과가 비교적 일치하는 경향성을 보여 주었다. 또한 포화지반에서의 평면 압축파 해석의 경우도 해석결과와 이미 검증된 프로그램 또는 완전해의 해석결과는 거의 유사하게 나타나는 것을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.419-422
• /
• 1995

In this paper, we propose two methods for AE source location on the material with unknown AE wave velocity. By this method, we can apply this method to arbitrary material of which properties are not known exactly. Also, in this paper, the mechanism of error generation in both methods are discussed and performances are compared by using computer simulation and experiments which uses a lead break as the AE source on the aluminum plate.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.86.6-86
• /
• 2002

This work presents a study on development of a practical and quantitative technique for assessment of the healthy state of a structure by piezoelectric impedance-based technique associated with longitudinal wave propagation measuring method. A truss structure embedded with piezoelectric patches is investigated for a fundamental study on estimation of the looseness of bolts in the joint. In order to evaluate the minute mechanical impedance change due to loosening bolt, a harmonic longitudinal elastic wave is applied to the structure by a pair of PZT patches and their electric impedance is measured simultaneously. According to the experimental results, the change of the electric impedance of P...

• The Journal of the Acoustical Society of Korea
• /
• 제19권1E호
• /
• pp.43-47
• /
• 2000

The paper describes a theoretical study on the speed of torsional elastic waves propagating in a circular rod whose material properties vary periodically as harmonic functions of the axial coordinate. An approximate solution for the phase speed has been obtained by using the perturbation technique for sinusoidal modulation of small amplitude. This solution shows that the wave speed in the nonuniform rod is dependent on the wave frequency as well as the periodic variation of the material properties. It implies that the torsional waves considered in this paper are dispersive even in the fundamental mode.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.440-444
• /
• 2006

In this paper an analytical study is carried out to improve the capacity of absorbing boundary using dashpot, one of the most widely used absorbing boundaries in FEM. Using harmonic plane wave equation, absorbing boundary condition is modified to maximize its capacity according to the incident angle. Validity of the modified absorbing boundary conditions is investigated by adopting the solution of Miller-Pursey which is the solution for the wave propagation in semi-infinite elastic media, and the absorption ratio is calculated according to various Poisson's ratios.

• 비파괴검사학회지
• /
• 제20권2호
• /
• pp.138-149
• /
• 2000

본 논문에서는 유한 고체내 초음파 전파 및 산란 현상의 해석을 위한 다양한 경계요소 모델링 기법이 제시되었다. 박판 재료내 유도초음파 전파에 대한 모드해석을 위해 비균질 적충 박판 구조물에 대한 탄성동역학 경계치 문제가 설정되었으며 이에 대한 수치해로부터 유도초음파의 전파특성을 나타내는 분산곡선이 얻어졌다. 파동 산란시 발생되는 기하학적 복잡성과 모드변환 문제를 수치적으로 모델링하기 위해 탄성 동역학 경계요소법을 적용하였고 이를 박판내 유도초음파의 이론적 직교 모드의 중첩해와 결합시킨 혼합형 경계요소법으로 확장하여 유한 고체내 다중 모드변환의 효율적 모델링법이 제안되었다. 주파수 영역의 수치해로부터 시간 의존 문제의 파동신호 예측을 위해 역 푸리에(Fourier) 변환을 통한 시간 영역 파동산란 신호가 얻어졌다. 이와 함께 실제 초음파 탐상조건에 보다 가까운 파동산란 문제의 모델링을 위해 3차원 경계요소법을 소개하고, 개발중인 3차원 경계요소 프로그램을 이용하여 유한 직경을 갖는 봉재내의 파동 전파를 수치적으로 해석하여 해석해와 비교 검증하였다. 본 논문에서 제시된 탄성파동 모델링 기법은 정량적 비파괴 평가법을 확립하는데 다양하게 응용될 수 있을 것으로 기대된다.

• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.949-957
• /
• 2006

In this Paper, reduction of noise and vibration in ship cabins by using floating floor is studied. Two theoretical models are presented and predicted insertion losses of floating floor are compared to experimental results, where measurements have been done in mock-up built for simulating typical ship cabin structures. In ships, mineral wool is usually used as the impact absorbing materials. The first model (M-S-Plate Model) is that upper plate and mineral wool are assumed as a one-dimensional mass-spring system, which is in turn attached to the simply supported elastic floor. The second model (Wave-Plate Model) is that mineral wool is assumed as an elastic medium for wave propagation. The comparisons show that M-S-Plate model is in good agreement with experimental results when density of mineral wool is 140K, and fiber direction is horizontal. For higher density and vertical fiber direction, Wave-Plate model shows good agreements with measurements. It is found that including the elastic behavior of the floor is essential in improving accuracy of the prediction for low frequency ranges below $100{sim}200Hz$.

• Structural Engineering and Mechanics
• /
• 제13권5호
• /
• pp.543-556
• /
• 2002

A dynamic elastic local buckling analysis is presented for a pile subjected to an axial impact load. The pile is assumed to be geometrically perfect. The interactions between the pile and the surrounding soil are taken into account. The interactions include the normal pressure and skin friction on the surface of the pile due to the resistance of the soil. The analysis also includes the influence of the propagation of stress waves through the length of the pile to the distance at which buckling is initiated and the mass of the pile. A perturbation technique is used to determine the critical buckling length and the associated critical time. As a special case, the explicit expression for the buckling length of a pile is obtained without considering soil resistance and compared with the one obtained for a column by means of an alternative method. Numerical results obtained show good agreement with the experimental results. The effects of the normal pressure and the skin friction due to the surrounding soil, self-weight, stiffness and geometric dimension of the cross section on the critical buckling length are discussed. The sudden change of buckling modes is further considered to show the 'snap-through' phenomenon occurring as a result of stress wave propagation.