• 제목/요약/키워드: eigenvector

검색결과 343건 처리시간 0.03초

지진하중을 받는 철근콘크리트 골조 구조물의 모드 해석 (Model Analysis of R/C Framed Structures to Earthquake Excitations)

  • 장극관;이리형
    • 콘크리트학회지
    • /
    • 제6권3호
    • /
    • pp.180-189
    • /
    • 1994
  • 모드좌표를 이용한 R/C 골조구조물의 근사적인 비선형 동적해석법을 제안하였다. 과거에도 비선형 문제를 푸는데 있어서 모드좌표에서의 해석이 부분적으로 이용되어 왔으나 각 하중증분에 따른 구조물의 강성변화로 인하여 고유치를 재계산하여야 하기 때문에 그리 널리 사용되지 못하였다. 여기서 제안된 방법은 동적해석 수행중에 산정된 제한된 수만의 고유치를 산정하였다. 그리하여 일정한 수의 고유치만으로 동적해석에서 반복하여 사용하였다. 부재의 소성힌지영역에서의 강성변화 및 핀치효과등을 부재의 이력모델에 의해서 표현되었으며 이러한 알고리즘은 휨변형이 지배하는 R/C 골조구조물의 예비해석에 유용하게 사용될 수 있다. 본 연구에서는 철근콘크리트 부재의 비선형 구조모델의 구성방법 및 그 특성 그리고 모드해석법의 알고리즘을 제안하고 그 효율성을 입증하였다.

IS-2000 1X 신호 환경하에서의 고유공간 방법에 근간한 그래디언트 온-오프 빔평성 알고리즘 (Gradient On-Off Beamforming Algorithm Based On Eigen-Space Method For a Smart Antenna In IS-2000 1X Signal Environment)

  • 이정자;이원철;최승원
    • 한국통신학회논문지
    • /
    • 제28권10C호
    • /
    • pp.949-957
    • /
    • 2003
  • 본 논문은 이동통신 환경하에서 각도퍼짐(Angle Spread)이 증가하여도 우수한 성능을 유지하는 그래디언트 온-오프 빔형성 알고리즘을 제안한다. 제안된 방법은 수신 벡터신호의 자기상관행렬의 최대 고유치에 대응하는 고유벡터를 이용하되 상대적으로 큰 고유치에 대응하는 2개 고유벡터를 이용하여 다이버시티 이득을 얻음으로써 하나의 고유벡터 하나만 이용하는 방법[1]보다 우수한 성능을 나타난다. 본 제안된 방법을 IS-2000 1X신호환경에서 모의실험 결과 각도퍼짐이 증가하여도 기존의 하나의 고유벡터 하나를 사용하는 알고리즘보다 성능이 우수함을 확인 하였다.

MIMO 시스템에서 최적 검출 기법을 위한 궤환 Semi-Definite Relaxation 검출기 (Feedback Semi-Definite Relaxation for near-Maximum Likelihood Detection in MIMO Systems)

  • 박수빈;이동진;변윤식
    • 한국통신학회논문지
    • /
    • 제33권12C호
    • /
    • pp.1082-1087
    • /
    • 2008
  • MIMO 시스템에서 ML 검출 기법은 많은 다른 검출기들보다 우수한 성능을 보인다. 그러나 ML 검출기법은 NP-hard 문제로 인해 실제 시스템에서 사용하기 어려운 단점을 가지고 있다. 이것은 polynomial-time 안에 최적의 해 (optimal solution)를 찾을 수 없음을 의미한다. 본 논문에서는 ML problem을 적용한 SDR (Semi-Definite Relaxation)에 궤환기법을 통한 검출 알고리즘을 제안한다. 이는 SDR에 의해 구한 최적의 해를 spectral decomposition을 이용해 우세한 eigenvector를 찾아 송신 신호의 확률 분포를 구하고, 이를 수신 신호에 궤환 시킨다. 이는 또 다른 ML problem으로써 다시 SDR를 통해 최적의 해를 구하고 우세한 eigenvector에 해당하는 송신 신호 확률을 구한다. 이 확률은 ML problem에 해당하는 최적의 값으로 추정 송신 신호를 검출할 수 있다. 이러한 기법을 통해 최적 성능을 갖는 ML 검출 기법의 성능에 보다 더 가깝게 접근하였다.

Experimental damage evaluation of prototype infill wall based on forced vibration test

  • Onat, Onur
    • Advances in concrete construction
    • /
    • 제8권2호
    • /
    • pp.77-90
    • /
    • 2019
  • This paper aims to investigate vibration frequency decrease (vibration period elongation) of reinforced concrete (RC) structure with unreinforced infill wall and reinforced infill wall exposed to progressively increased artificial earthquake load on shaking table. For this purpose, two shaking table experiments were selected as a case study. Shaking table experiments were carried on 1:1 scaled prototype one bay one storey RC structure with infill walls. The purpose of this shaking table experiment sequence is to assess local behavior and progressive collapse mechanism. Frequency decrease and eigen-vector evolution are directly related to in-plane and out-of-plane bearing capacities of infill wall enclosure with reinforced concrete frame. Firstly, frequency decrease-damage relationship was evaluated on the base of experiment results. Then, frequency decrease and stiffness degradation were evaluated with applied Peak Ground Acceleration (PGA) by considering strength deterioration. Lastly, eigenvector evolution-local damage and eigenvector evolution-frequency decrease relationship was investigated. Five modes were considered while evaluating damage and frequency decrease of the tested specimens. The relationship between frequency decrease, stiffness degradation and damage level were presented while comparing with Unreinforced Brick Infill (URB) and Reinforced Infill wall with Bed Joint Reinforcement (BJR) on the base of natural vibration frequency.

특성 벡터를 이용한 얼굴 인증 시스템에서 변환된 생체 정보 데이터의 가역성에 대한 보안 문제 분석 (The Security Problem Analysis for Reversibility of Transformed Biometric Information Data on Eigenvector-based face Authentication)

  • 김군순;강전일;양대헌;이경희
    • 정보보호학회논문지
    • /
    • 제18권3호
    • /
    • pp.51-59
    • /
    • 2008
  • 생체 정보 인식은 사용자의 인증을 위한 수단으로써 많은 연구가 진행 되어 오고 있다. 그 중 얼굴 인식 분야에서 특성벡터를 이용한 사용자의 얼굴 인식 기법이 존재한다. 이 기법은 전체 얼굴 데이터 집합에서 벡터 공간을 만들어 내고 생체정보 템플릿을 사상시켜 추상화된 데이터를 생성하는 기법이다. 그러나 생체 정보의 보안성을 일컫는 개념인 취소 가능한 특성(Cancelable Feature)을 기대 할 수 는 없다. 이 논문에서는 특성 벡터를 이용한 얼굴 인증 시스템에서 변환된 생체정보 데이터의 복원에 대한 보안 문제를 지적하고, 예상 가능한 공격 시나리오를 실험을 통해 보인다.

Performance Analysis of the Anti-Spoofing Array Antenna with Eigenvector Nulling Algorithm

  • Lee, Kihoon;Song, Min Kyu;Lee, Jang Yong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제11권3호
    • /
    • pp.181-189
    • /
    • 2022
  • The public open signals from Global Navigation Satellite System (GNSS) including Global positioning system (GPS) are used widely by many peoples in the world except for the public regulated restriction signals which are encrypted. Nowadays there are growing concerns about GNSS signal spoofing which can deceive the GNSS receivers by abusing these open services. To counter these spoofing threats, many researches have been studied including array antenna techniques which can detect the direction of arrival by means of Multiple Signal Classification (MUSIC) algorithm. Originally the array antenna techniques were developed to countermeasure the jamming signal in electronic warfare by using the nulling or beamforming algorithm toward a certain direction. In this paper, we study the anti-spoofing techniques using array antenna to overcome the jamming and spoofing issues simultaneously. First, we will present the theoretical analysis results of spoofing signal response of Minimum Variance Distortionless Response (MVDR) algorithm in array antenna. Then the eigenvector algorithm of covariance matrix is suggested and verified to work with the existing anti-jamming method. The modeling and simulation are used to verify the effectiveness of the anti-spoofing algorithm. Also, the field test results show that the array antenna system with the proposed algorithms can perform the anti-spoofing function. This anti-spoofing method using array antenna is very effective in the view point of solving both the jamming and spoofing problems using the same array antenna hardware.

An Analysis of Eigenvalues and Eigenvectors for V-notched Cracks in Pseudo-isotropic Dissimilar Materials

  • Kim, Jin-kwang;Cho, Sang-Bong
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제3권2호
    • /
    • pp.33-44
    • /
    • 2002
  • The problem of eigenvalues and eigenvectors is obtained from a v-notched crack in pseudo-isotropic dissimilar materials by the traction free boundary and the perfect bonded conditions at interface. The complex stress function of the two-term William's type is used. The eigenvalues are solved by a commercial numerical program, MATHEMATICA. Stress singularities for v-notched cracks in pseudo-isotropic dissimilar materials are discussed. The RWCIM(Reciprocal Work Contour Integral Method) is applied to the determination of eigenvector coefficients associated with eigenvalues with egenvalues. The RWCIM algorithm is also coded by the MATHEMATICA.

감쇠 시스템의 고유진동수와 모드의 개선된 만감도 기법 (Improved Sensitivity Method for Natural Frequency and Mode Shape of Damped Systems)

  • 조홍기
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
    • /
    • pp.176-183
    • /
    • 2000
  • A simplified for the eigenpair sensitivities of damped systems is presented. This approach employs a reduced equation to determine the sensitivities of eigenpairs of the damped vibratory systems with distinct eigenvalues. The derivatives of eigenpairs are obtained by solving an algebraic equation with a symmetric coefficient matrix of (n+1) b (n+1) dimension where n is the number of degree of freedom. This is an improved method of the previous work of Lee and Jung. Two equations are used to find eigenvalues derivatives and eigenvector derivatives in their paper. A significant advantage of this approach over Lee and Jung is that one algebraic equation newly developed is enough to compute such eigenvalue derivatives and eigenvector derivatives. Simulation results indicate that the new method is highly efficient in determining the sensitivities of engenpairs of the damped vibratory systems with distrinct eigenvalues.

  • PDF

감성 측정평가 시뮬레이터의 설비 배치 (Layout of simulator for measuring and evaluating human sensibility)

  • 김채복;박세진;김철중
    • 대한인간공학회지
    • /
    • 제18권2호
    • /
    • pp.121-132
    • /
    • 1999
  • This paper investigates the methodology to develop a layout of the simulator for measuring and evaluating human sensibility. Since the simulator layout is different from general building layouts in that it is organized in order to communicate systematically between facilities, laboratories to evaluate human sensibility and equipments to support experiments in simulator, two approaches based on eigenvector and cut tree are applied to develop a simulator layout. Qualitative input data (relationship chart. space requirements for each laboratory and equipment) are obtained and transformed into quantitative data. The information obtained by two approaches provides several meaningful clues to generate the simulator layout. The simulator layout is presented based on the obtained information by two approaches. Extracted quantitative data by using eigenvector and cut tree are meaningful of generating the simulator layout.

  • PDF

A Novel Eigenstructure Assignment for Linear Systems with Probabilistic Uncertainties

  • Seo, Y.B.;Choi, J.W.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.7-12
    • /
    • 2003
  • In this paper, S(stochastic)-eigenvalue concept and its S-eigenvector for linear continuous-time systems with probabilistic uncertainties are proposed. The proposed concept is concerned with the perturbation of eigenvalues due to the probabilistic variable parameters in the dynamic model of a plant. S-eigenstructure assignment scheme via the Sylvester equation approach based on the S-eigenvalue concept is also proposed. The proposed design scheme is applied to the longitudinal dynamics of open-loop-unstable aircraft with possible uncertainties in aerodynamic and thrust effects as well as separate dynamic pressure.

  • PDF