• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.941-944
• /
• 1997

In this paper, new algorithm is proposed to transform the heuristically approximated eigenvalue calculation procedure of the AESOPS algorithm to the Newton Rahpson method. The new algorithm is directly calculated from the original eigenvalue calculation of the AESOPS and thus a large number of the same data of the AESOPS algorithm can be used efficiently in this method.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.385-398
• /
• 1997

High order finite element have a greater convergence rate than low order finite elements, and in general produce more accurate results. These elements have the disadvantage of being more computationally expensive and often require a longer time to solve the finite element analysis. High order elements have been used in this paper to obtain a new eigenvalue solution with out re-solving the new model. The optimisation of the eigenvalue via the differentiation of the Rayleigh quotient has shown that the additional nodes associated with the higher order elements can be condensed out and solved using the original finite element solution. The higher order elements can then be used to calculate an improved eigenvalue for the finite element analysis.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1394-1400
• /
• 1999

This paper presents and efficient improvement of the iterative eigenvalue calculation method and the selection of initial values in AESOPS algorithm. To determine the initial eigenvalues of the system, system state matrix is constructed with the two-axis generator model. From the submatrices including synchronous and damping coefficients, the initial eigenvalues are calculated by the QR method. Participation factors are also calculated from the above submatrices in order to determine the generators which have a important effect to the specific oscillation mode. Also, the heuristically approximated eigenvalue calculation method in the AESOPS algorithm is transformed to the Newton Raphson Method which is largely used in the nonlinear numerical analysis. The new methods are developed from the AESOPS algorithm and thus only a few calculation steps are added to practice the proposed algorithm.

• 한국인터넷방송통신학회논문지
• /
• 제13권4호
• /
• pp.39-46
• /
• 2013

단일 노드 스펙트럼 센싱과 비교했을 때, 협력스펙트럼 센싱은 스펙트럼 센싱의 신뢰도를 크게 향상 시킬 수 있다. 또한 고유값(Eigenvalue)기반의 스펙트럼 센싱 기법은 에너지 검출 기반의 센싱 기법에 비해 센싱 성능을 제공할 수 있기 때문에 최근 많은 관심을 끌고 있다. 고유값(Eigenvalue)기반의 스펙트럼 센싱 기법의 성능은 smoothing factor (SF)가 증가함에 따라 더 좋은 센싱 결과를 얻을 수 있으나, SF값이 증가함에 따라 더 긴 센싱 시간이 요구된다. 더나가 협력 스펙트럼의 경우, 노드수가 증가함에 따라 더 많은 전송시간이 요구됨으로, 고유값(Eigenvalue)기반의 협력 스펙트럼 센싱의 경우 SF값이 센싱 시간을 결정하는 중요한 요소가 된다. 이에 본 논문에서는 센싱 시간을 증가하지 않고 SF값을 증가시킬 수 있는 고유값 및 중첩기반의 협력 스펙트럼 센싱 기법을 제안한다. 제안된 방식에서는 SF값을 증가시키기 위하여 전송(reporting) 시간을 활용한다. 시뮬레이션을 통해 제안된 방식이 기존 고유값 (Eigenvalue)기반의 센싱기법에 비교하여 더 작은 센싱 시간을 유지하면서 국부(local) 센싱값 및 전체(global) 센싱값을 향상 시킬 수 있음을 보였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권3호
• /
• pp.127-133
• /
• 2002

This paper presents an efficient improvement of the iterative eigenvalue calculation method of the AESOPS algorithm. The intuitively and heuristically approximated iterative eigenvalue calculation method of the AESOPS algorithm is transformed to the Second Order Newton Raphson Method which is generally used in numerical analysis. The equations of second order partial differentiation of external torque, terminal and internal voltages are derived from the original AESOPS algorithm. Therefore only a few calculation steps are added to transform the intuitively and heuristically approximated AESOPS algorithm to the Second Order Newton Raphson Method, while the merits of original algorithm are still preserved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.319-321
• /
• 1994

When a few eigenvalues and eigenvectors are desired, Rayleigh Quotient Iteration(RQI) is widely used. The ROI, however, cannot give maximum or minimum eigenvalue/eigenvector. In this paper, Modified Rayleigh quotient Iteration(MRQI) is developed. The MRQI can give the maximum or minimum eigenvalue/eigenvector regardless of tile initial starting vector.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.593-600
• /
• 2003

Structural optimization often requires the evaluation of design sensitivities. The Semi Analytic Method(SAM) fur computing sensitivity is popular in shape optimization because this method has several advantages. But when relatively large rigid body motions are identified for individual elements. the SAM shows severe inaccuracy. In this study, the improvement of design sensitivities corresponding to the rigid body mode is evaluated by exact differentiation of the rigid body modes. Moreover. the error of the SAM caused by numerical difference scheme is alleviated by using a series approximation for the sensitivity derivatives and considering the higher order terms. Finally the present study shows that the refined SAM including the iterative method improves the results of sensitivity analysis in dynamic problems.

• Interaction and multiscale mechanics
• /
• 제1권2호
• /
• pp.211-230
• /
• 2008

Owing to the growing size of the eigenvalue problem and the growing number of eigenvalues desired, solution methods of iterative nature are becoming more popular than ever, which however suffer from low efficiency and lack of proper convergence criteria. In this paper, three efficient iterative eigenvalue algorithms are considered, i.e., subspace iteration method, iterative Ritz vector method and iterative Lanczos method based on the cell sparse fast solver and loop-unrolling. They are examined under the mode error criterion, i.e., the ratio of the out-of-balance nodal forces and the maximum elastic nodal point forces. Averagely speaking, the iterative Ritz vector method is the most efficient one among the three. Based on the mode error convergence criteria, the eigenvalue solvers are shown to be more stable than those based on eigenvalues only. Compared with ANSYS's subspace iteration and block Lanczos approaches, the subspace iteration presented here appears to be more efficient, while the Lanczos approach has roughly equal efficiency. The methods proposed are robust and efficient. Large size tests show that the improvement in terms of CPU time and storage is tremendous. Also reported is an aggressive shifting technique for the subspace iteration method, based on the mode error convergence criteria. A backward technique is introduced when the shift is not located in the right region. The efficiency of such a technique was demonstrated in the numerical tests.

• Tribology and Lubricants
• /
• 제11권2호
• /
• pp.56-62
• /
• 1995

The anisotropic pressure distribution of the hydrodynamic bearing may generate the unstable vibration phenomenon over a certain speed. These vibrations, known as whirl, whip or rotor instability, cannot be sustained over a wide range of rotational spees. Besides these vibrations not only perturb the normal operation of a rotating machine, but may also cause serious damage to the machinery system. And, it is really impossible to change one parameter without changing others, or difficult to fabricate the modified non-circular type bearing, with all the other cures used just now, In this study, hybrid bearing with magnetic exciter is designed for stability improvement of hydrodynamic bearing rotor system without changing mechanical parameters. For stability study, eigenvalue study of the bearing-rotor system is executed by finite element method and results of analyses and experiments show the possibilities of the stability improvement of the hydrodynamic bearing system by using the electricmagnetic force.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1064-1066
• /
• 1997

This paper proposes an efficient algorithm of designing PSS and CSS. First, the stabilizer input variable is selected using the participation matrix. Secondly, the stabilizer constants are decided using first order eigenvalue sensitivity. The proposed method was validated to sample power system.