• Tribology and Lubricants
• /
• 제36권5호
• /
• pp.262-266
• /
• 2020

Herein, we present a numerical investigation of wear analysis of sliding systems with a constant speed subjected to Archard's wear law. For this investigation, we compared two methods: eigen-wear analysis and adaptive meshing technique. The eigen-wear analysis is advantageous to predict the evolution of contact pressure due to wear using the initial contact pressure and contact stiffness. The adaptive meshing technique in finite element analysis is employed to obtain transient wear behavior, which needs significant computational resources. From the eigen-wear analysis, we can determine the appropriate element size required for finite element analysis and the time increment required for wear evolution by a dimensionless variable above a certain value. Since the prediction of wear depends on the maximum contact pressure, the finite element model should have a reasonable representation of the maximum contact pressure. The maximum contact pressure and wear amount according to this dimensionless variable shows that the number of fine meshes in the contact area contributes more to the accuracy of the wear analysis, and the time increment is less sensitive when the number of contact nodes is significantly larger. The results derived from a two-dimensional wear model can be applied to a three-dimensional wear model.

• 융합신호처리학회논문지
• /
• 제3권3호
• /
• pp.47-53
• /
• 2002

본 논문은 동영상의 대표프레임에서 eigen value와 휘도 성분을 이용한 내용기반 검색 기법에 관한 연구이다. video를 shot단위로 분할하여 shot을 대표하는 대표프레임을 얻어내고, 그 대표프레임을 Eigen Component Analysis(ECA)를 이용하여 데이터베이스를 생성하여 shot들의 휘도값 분포를 구한다. 생성된 코드북과 각 대표 프레임에 대한 코드북 인덱스 값, 휘도값을 database화하여 질의 영상과 video database간의 저장된 비디오들의 코드북과 코드워드간의 유클리디안 거리를 이용하여 유사도 높은 비디오를 찾고, 검색되어진 video에 포함된 대표프레임들의 코드북 인덱스 값과 입력 영상의 코드북 인덱스 값을 비교하여 입력 영상의 특징과 가장 유사한 대표프레임을 얻어낸다. 실험결과 제안된 방법이 검색에 있어서 영상의 형태에 대한 전체적인 특징을 제공하는 대표프레임의 eigen value와 휘도 성분을 이용함으로서 보다 검색 결과가 우수하며, 영상의 통계적인 특성을 이용함으로서 시간과 메모리 공간을 줄일 수 있음을 확인하였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.195-202
• /
• 2016

In this paper, crack detection method using eigen value analysis is presented. Three methods are used: theoretical analysis, finite element method with the cracked beam elements and finite element method with three dimensional continuum elements. Finite element formulation of the cracked beam element is introduced. Additional term about stress intensity factor based on fracture mechanics theory is added to flexibility matrix of original beam to model the crack. As using calculated stiffness matrix of cracked beam element and mass matrix, natural frequencies are calculated by eigen value analysis. In the case of using continuum elements, the natural frequencies could be calculated by using EDISON CASAD solver. Several cases of crack are simulated to obtain natural frequencies corresponding the crack. The surface of natural frequency is plotted as changing with crack location and depth. Inverse analysis method is used to find crack location and depth from the natural frequencies of experimental data, which are referred by another papers. Predicted results are similar with the true crack location and depth.

• 한국통신학회논문지
• /
• 제33권4C호
• /
• pp.336-341
• /
• 2008

본 논문에서는 신호의 반 파장 간격으로 안테나 소자를 배치한 빔형성 시스템에서 다이버시티 이득을 얻을 수 있는 빔형성 알고리즘을 제안한다. 제안된 알고리즘은 수신 신호 공간을 스팬(span)하는 고유 벡터들을 이용하여 빔형성 한다. 본 논문에서는 채널 추정을 위한 최적의 고유 공간 차수를 정하기 위한 기준도 제안한다. 제안된 알고리즘을 적용한 빔형성 시스템은 기존의 빔형성 시스템과는 달리 각 퍼짐이 증가함에 따라 다이버시티 이득을 얻어 그 성능이 개선된다. 본 논문은 제안된 알고리즘의 설명과 함께 다양한 컴퓨터 시뮬레이션을 통한 제안 알고리즘의 성능 분석을 제공한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.195-201
• /
• 1996

This paper is mainly forcused on the application of modal analysis In analyze the geometrically non-linear buckling behaviors of large span spatial structures, and the evaluation of each eigen mode affected post-buckling behaviors and buckling loads. Modal analysis is applied . to derivation of the system matrices transforming actual displacement space into generalized coordinates space represented by coefficients multiplied in the linear combination of eigen modes which are independent and orthogonal each other. By using modal analysis method, it will be expected to save the calculating time by computer extremely. For example, we can obtain the satisfactorily good results by using about 7% of total eigen modes only in case of single layer latticed dome. And we can decrease the possibility of divergence on the bifurcation point in the calculation of post-buckling path. Arc-length method and Newton-Raphson iteration method are used to calculate the nonlinear equilibrium path.

• 한국기계가공학회지
• /
• 제9권3호
• /
• pp.28-34
• /
• 2010

The suggested coupled system was analyzed using FRF and mode analysis. The eigen-mode of FRF analysis is consistent with that of conventional FFT in spectrum. Also, three numerical responses of second order system, which are coupled, was obtained using the Runge-Kutta Gill method. The displacement, velocity and acceleration response were calculated for the numerical analysis of coupled system and the displacement response was used for the calculation of FRF of this system. Using the mixed response of 1st and 2nd mode in example, the FRF was analysed for the analysis of mixed mode coupled system. Also, its mode shape was acquired by solving the eigen problem of coupled system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.316-318
• /
• 2003

An eigen-analysis of the coherency matrix provides the polarimetric scattering mechanisms with the matrix characterizing parameters. In this paper, the coherency matrices of deciduous and coniferous vegetation are calculated using the analytical method. The Generalized Rayleigh-Gans approximation is used to model backscattering from distributed coniferous and deciduous leaves. The characteristics of eigen-parameters of simulated coherency matrix for deciduous and coniferous leaves with respect to the leaf shapes and orientations are illustrated.

• 한국기계가공학회지
• /
• 제9권3호
• /
• pp.35-41
• /
• 2010

In this study, a mode analysis of uncoupled system was discussed using FRF. The eigen-mode range of FRF analysis is consistent with conventional FFT in spectrum. Also, the numerical response of second order uncoupled system was obtained using the Runge-Kutta Gill method. The displacement, velocity and acceleration response were calculated after numerical analysis and its response was used for the calculation of FRF for uncoupled system. Using the separated and mixed response of 1st and 2nd mode in example, its FRF was analysed for the prediction of the uncoupled systems and its mode shape was calculated by solving the eigen problem.

• 소음진동
• /
• 제10권5호
• /
• pp.800-805
• /
• 2000

To determine the modal matrix and modal frequency of engine mount system, we most solve so-called eigen-value problem. However eigen-value problem of engine mount system with hydraulic mount can not be solved by general eigne-analysis algorithm because the properties of hydraulic mount vary with frequency. so in this paper the method for modal analysis of rigid body motions of an engine supported by hydraulic mount is proposed. Natural frequencies and mode shapes of this nonlinear system are obtained by using complex exponential method and Laplace transformation method. In time domain, impulse response functions are calculated by (two-sided) discrete inverse Fourier Transformation of forced frequency response functions achieved by Laplace transformation of the differential equation of motion. Considering the fact that frequency response functions synthesized by modal parameters form proposed method are in good agreement with original FRFs, it is proved that the proposed method is very efficient and useful for the analysis of eigne-value problem of hydraulic engine mount system.

• Journal of information and communication convergence engineering
• /
• 제3권2호
• /
• pp.67-71
• /
• 2005

Interference occurs by signals received from directions that were different from the signals of the users in a mobile communication system. Various studies have been undertaken, including diversity, equalizer, etc., in order to reduce interference. In this study, the weighted value of the array antenna was obtained to improve signal-to-noise ratio. The weighted value was obtained as an eigen value and an eigen vector by using the correlation coefficient of the signal. The weighted value obtained was then applied to the CDMA system to increase system performance and capacity. Both QPSK and OQPSK modulation systems were applied to analyze performance.