• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.59-68
• /
• 2018

Opto-acoustic systems provide structural and functional information regarding biological tissues. Conventional opto-acoustic systems typically employ continuous or pulsed lasers as transmission sources. Compared to lasers, light emitting diodes (LEDs) are cost-effective and relatively portable excitation sources but are non, coherent. Therefore, in this study, a relatively low cost lens - a type of Ramsden eyepiece - was specially designed to theoretically calculate the illumination and achieve a constant brightness across the pupil of an eye. In order to verify the capability of the developed light-emitting diode-acoustic (LEDA) systems, we carried out experiments on bovine and bigeye tuna eyeball samples, which are of similar size to the human eye, using low frequency (10 MHz) and high frequency (25 MHz) ultrasound transducers. High frequency ultrasound transducers are able to provide higher spatial resolution compared to low frequency ultrasound transducers at the expense of penetration depth. Using the 10 MHz and 25 MHz ultrasound transducers, acceptable echo signals (3.82, 3.94, and 5.84 mV at 10 MHz and 282, 1557, 2356 mV at 25 MHz) from depth greater than 3 cm and 6 cm from the anterior surface of the eye were obtained. We thereby confirmed that the LEDA system using a pulsed LED with the designed Ramsden eyepiece lens, used in conjunction with low and high frequency ultrasound transducers, has the potential to be a cost-effective alternative method, while providing adequate acoustic signals from bovine and bigeye tuna ocular areas.

• 한국통신학회논문지
• /
• 제12권3호
• /
• pp.224-238
• /
• 1987

본 논문에서 제안된 스펙트럼 분석장치는 개루프 방식의 VCO를 모듈러 함수를 이용한 PLL 주파수 합성기로 대치시킴으로써 단일루우프의 주파수 합성기로 개개의 다른 주파수 대역 및 채널간격을 얻을 수 있었다. 스펙트럼의 추출은 자승검파방식을 이용함으로써 종래의 포락선 검파방식보다 입력감도를 개선할 수 있었고 Z80 마이크로프로세서를 이용한 제어기는 주파수 합성기를 제어하는 동시에 추출된 스펙트럼을 메모리에 저장함으로써 비주기성 신호의 분석을 가능케 하였다.

• 한국전자파학회지:전자파기술
• /
• 제10권3호
• /
• pp.39-47
• /
• 1999

This paper presents the survey of technical trend in AD converters for wireless communication systems. This paper provides explanations about the performance measure of ADC in wireless communication application and the relation ship between BER versus effective resolution and sampling speed. The survey suggests that at least one step analog frequency down conversion is required for software defined radio systems due to current technological limit.

• 소음진동
• /
• 제7권5호
• /
• pp.747-756
• /
• 1997

Wigner-Ville distribution which is a time-frequency analysis has a fatal drawback, when the signal has multiple components. This is the cross-talk and often causes a neagative value in the distribution. Wingner-Ville distriution is an expression of power, therefore the cross-talk must be avoided. Smoothing the Wigner-Ville distribution by convoluting it with a window, is most commonly used to reduce the cross-talk. There can be infinite number of distributions depending on the windows. But, the smoothing reduces resolution in time-frequency plane; this motives to design a more effective window in reducing cross-talk while remaining resolution. The domain in which the cross-talk and legitimate components can be easily distinguished, is the ambiguity function. In the ambiguity function domain, the legitimate components appear as linear lines passing through the orgine. But, the cross-talk is widely distributes in the ambiguity function plane. Based on the relative distributions of cross-talk and legitimate components, rotating window can be designed to minimize cross-talk. Applying the rotating window to the ambiguity function corresponds to smoothing the Wigner-Ville distribution. Therefore, the effects of rotating window is estimated in terms of the bias error due to smooting the Wigner-Ville distribution. By applying the rotating window, not only the Wigner-Ville distribution but also its properties are changed. The properties of the new distribution are checked, in order to complete analyzing the rotating window.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.585-590
• /
• 2000

Recently, It is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic Signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of Ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research, considering a thin film below the limit of ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic Signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness, sound velocity, and step height, regardless of interference phenomenon. Numeral information was deduced and quantified effective information from the image. Also, pattern recognition of a defected input image was performed by neural network algorithm. Input pattern of various numeral was composed combinationally, and then, it was studied by neural network. Furthermore, possibility of pattern recognition was confirmed on artifical defected input data formed by simulation. Finally, application on unknown input pattern was also examined.

• 전자공학회논문지S
• /
• 제34S권3호
• /
• pp.55-62
• /
• 1997

For the effective removal of artifacts and the extraction of an improved evoked potential response, we propose the averaging method usin gthe shrinkag eof wavelet coefficients. The wavelet analysis decomposes the measured evoked potentials into scale coefficients with low frequency components and wavelet coefficients with high ones as a resolution level, respectively. and in the course of synthesis evoked potentials, the presented method shrinks the wavelet coefficients, and then reproduces the evoked potentials, and lastly averages it. We measured visual evoked potentials to simulate the averaging method using the shrinkage of wavelet coefficients, and compared it with aveaged signal. As a result of simulations, the proposed method gets improved VEP about 0.2-1.6dB in comparison with the averaging method with daubechies wavelet in the resolution level four.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.166-172
• /
• 2021

The purpose of this study is to identify the impact of informatization minds of college students majoring in sports on information development efforts and academic achievement. Accordingly, a survey was conducted on 200 college students majoring in physical education at D University, and 197 students were selected as the final effective samples. Data processing was conducted using SPSS 23 for frequency analysis, reliability analysis, correlation analysis, and regression analysis. The results are as follows: First, recognition of the necessity of informatization education, a subfactor of the informatization mind, has a positive impact on informatino development efforts. Second, recognition of the necessity of informatization education, understanding and utilization of informatization concepts among sub-factors of informatization minds have a positive impact on the major learning achievement. Third, all the conversational factors in the informatization mind have a positive impact on study problem resolution. Fourth, information development efforts have a positive impact on the major learning achievement and the study problem resolution. Therefore, efforts are needed to increase the information mindset of college students major in sports.

• Advances in aircraft and spacecraft science
• /
• 제4권5호
• /
• pp.543-553
• /
• 2017

Vibration is a source of performance degradation in all optical imaging systems. Performance of high resolution remote sensing payloads is often limited due to satellite platform vibrations. Effects of Linear and high frequency sinusoidal vibrations on the system MTF are known exactly in closed form but the low frequency vibration effects is a random process and must be considered statistically. Usually the vibration MTF budget is defined based on the mission requirements and the overall MTF limitations. For analyzing low frequency effects, designer must know all the systems specifications and parameters. With a good understanding of harmful vibration frequencies and amplitudes in the system preliminary design phase, their effects could be removed totally or partially. This procedure is cost effective and let the designer to eliminate just harmful vibrations and avoids over-designing. In this paper we have analyzed the effects of low-frequency platform vibrations on the payload's modulation transfer function. We have used a statistical analysis to find the probability of imaging with a MTF equal or greater than a pre-defined budget for different missions. The worst and average cases have been discussed and finally we have proposed "look-up figures". Using these look-up figures, designer can choose the electro-optical parameters in such a way that vibration effects be less than its pre-defined budget. Furthermore, using the results, we can propose a damping profile based on which vibration frequencies and amplitudes must be eliminated to stabilize the payload system.

• 대한공간정보학회지
• /
• 제14권3호
• /
• pp.3-11
• /
• 2006

최근 고해상도 위성영상이 다양한 분야에서 활발하게 이용하게 됨에 따라 지형자료의 정확한 경계검출에 대한 필요성이 대두되고 있다. 위성영상을 이용한 도로 경계 검출은 교통정보시스템을 포함한 도로계획, 도시계획 등의 지형 공간정보의 필수 연구로 인식되고 있다. 본 연구는 IKONOS 영상에서 도로 경계 검출을 위한 고주파와 저주파 필터링 비교분석에 관한 연구이다. 분석결과 저주파 필터링과 고주파 필터링은 입력영상의 경계부분에서 영상을 선택적으로 강조할 수 있었다. 저주파 필터링과 같은 영상강화 기법에서는 추출 가능한 경계부의 위치를 변화시키거나 영상의 화소값이 전체영상을 대상으로 변화시켜 비교적 도로 폭이 넓은 경우 효과적이었다. 고주파 필터링은 세부적인 영상정보를 선택적으로 강조할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.197-206
• /
• 2003

It is intended to retrieve the time history of displacement from measured acceleration signal. In this study, the word retrieving means reconstructing the time history of original displacement signal from already measured acceleration signal not just extracting various information using relevant signal processing techniques. Unlike extracting required information from the signal, there are not many options to apply to retrieve the time history of displacement signal, once the acceleration signal is measured and recorded with given sampling rate. There are two methods, in general, to convert measured acceleration signal into displacement signal. One is directly integrating the acceleration signal in time domain. The other is dividing the Fourier transformed acceleration signal by the scale factor of - $\omega$$^2$and taking the inverse Fourier transform of it. It turned out both the methods produced a significant amount of errors depending on the sampling resolution in time and frequency domain when digitizing the acceleration signals. A simple and effective way to convert the time history of acceleration signal into the time history of displacement signal without significant errors is studied here with the analysis on the errors involved in the conversion process.