• Analytical Science and Technology
• /
• v.34 no.2
• /
• pp.56-67
• /
• 2021

Due to the difficulty of grading visualized fingerprints with previously known evaluation methods for the comparison of split fingerprints, a preliminary study was performed with the densitometric image analysis (DIA) method as a potential quantitative and supplementary evaluation method. Each image of inked split fingerprints was divided into 4 zones for analysis. Weekly intra- and inter- analysis by two analysts with three whole fingerprints that were constructed by combining inked split fingerprints showed that the average area values and the ranges of difference fluctuation were not significantly different between strong fingerprints and strong-weak pairs, while they were different in weak fingerprints and weak-weak pairs. In the case of weak fingerprints, the exact acquisition of ridges was difficult and this seemed to influence the results. An additional study is needed for the improved reliability using DIA method with weak fingerprints such as 8 zones division rather than 4 zones. In addition, the analysis results performed by several analysts at different times should be used to improve the reliability of the analysis method further. Based on the above result, it can be judged that utilizing the DIA method as a secondary evaluation method of the existing scoring system would be effective with the additional studies especially on weak fingerprints.

• The Journal of the Korean dental association
• /
• v.57 no.6
• /
• pp.316-324
• /
• 2019

The new medical technology assessment system has a basic goal of protecting the public's health rights and promoting the development of the new medical technology with safe and effective medical technology that has been scientifically proven. The purpose of this study is to contribute to the activation of the new medical technology evaluation system by analyzing the application cases of the dental field after the implementation of the new medical technology evaluation system and proposing an efficient approach to approach the new medical technology evaluation system. The number of related literature and medical technology evaluation results are not significant in dental applications, the number of cases and the length of follow-up period of the relevant medical technology adopted as the new medical technology was far higher. As the speed of medical technology development increases, medical technology is expected to develop in the dental field as well. To introduce the medical technology to the clinical site, access to the correct direction of evidence is required to collect and objectify data at the medical site in order to prepare a literary basis for the medical technology.

• Journal of Korea Multimedia Society
• /
• v.24 no.7
• /
• pp.913-921
• /
• 2021

After arranging the general usability evaluation criteria of existing VUI researchers, this study verified how appropriate these criteria are for AI VUI specialized in navigation and the priority of their suitability. The VUI used in this study was analyzed through a survey from a total of 195 Chinese users after analyzing the navigation VUI used in China. As a result of the analysis, the usability evaluation criteria of the navigation VUI were extracted from three sub-factors of 'task accuracy', 'function satisfaction', and 'information reliability' in verifying conformance with general VUI evaluation criteria. With the recent advent of self-driving cars, safety and response speed are becoming very important, so Chinese users also ranked responsiveness as the top priority in VUI design, and the importance was also found to be high. Also, both men and women have the highest reactivity and the lowest multiplicity. VUI requires a convenient and natural interface to understand the intention between two objects through usability evaluation and verification in order to have effective interaction between humans and machines.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.31-41
• /
• 2022

As the environmental impacts of fossil fuel energy sources increase, the South Korean government has tried to change non-environmental-friendly enery sources to environmental-friendly energy sources in order to mitigate environmental effects, which lead to global warming and air pollution. With both a limited budget and limited time, it is essential to accurately evaluate the economic and environmental effects of renewable energy projects for the efficient and effective operation of renewable energy plants. Although the traditional economic evaluation methods are not ideal for evaluating the economic impacts of renewable energy projects, they can still be used for this purpose. Renewable energy projects involve many risks due to various uncertainties. For this reason, this study utilizes a real option method, the Geske compound model, to evaluate the renewable energy projects on Jeju Island in terms of economic and environmental values. This study has developed an economic evaluation model based on the Geske compound model to investigate the influences of flexibility and uncertainty factors on the evaluation process. This study further conducts a sensitivity analysis to examine how two uncertainty factors (namely, investment cost and wind energy production) influence the economic and environmental value of renewable energy projects.

• Earthquakes and Structures
• /
• v.22 no.5
• /
• pp.487-502
• /
• 2022

China is prone to earthquake disasters, and the higher seismic performance is required by many existing civil buildings. And seismic evaluation and retrofit are effective measures to mitigate seismic hazards. With the development of performance-based seismic design and diverse retrofit technology for buildings, advanced evaluation methods and retrofit strategies are in need. In this paper, we introduced the evolution of seismic performance objectives in China combined with performance-based seismic design. Accordingly, multi-phase evaluation methods and comprehensive seismic capacity assessment are introduced. For buildings with seismic deficiency or higher performance requirements, the retrofit technologies are categorized into three types: component strengthening, system optimization, and passive control. Both engineering property and social property for the retrofit methods are discussed. The traditional seismic retrofit methods usually are costly and disturbing, and for example in Beijing, seismic strengthening costs approx. 1000 RMB/m² (for 160 USD/m²), for hospital building even more expensive as 5000 RMB/m²(for 790 USD/m²). So cost-efficient and little disturbance methods are promising techniques. In the end, some opinions about the retrofit strategy and schemes category are shared and wish to discuss the situation and future of seismic retrofit in China.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.521-529
• /
• 2017

In this study, analyzed the effective width of concrete unfilled composite steel grid deck which has different shear connector details from that of composite bridge. The effective width of concrete unfilled composite steel grid deck according to effective width calculation method, load size and main bearing bar spacing-span ratio was evaluated. As a result of analysis, it is analyzed that the effective width is calculated to be nearly equal to the actual effective width by idealizing the stress shape as a trapezoidal shape. In addition, shear hole penetration reinforcing bars applied to increase the shear strength is shown to increase the effective width. From the results of the analysis of the effective width according to main bearing bar spacing-span ratio, proposes the correction factor that can calculate the effective width ratio of the unfilled steel composite steel grid deck.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.9
• /
• pp.431-439
• /
• 2001

This Paper illustrates a new numerical analysis method using a nodal effective load model for nodal probabilistic production cost simulation of the load point in a composite power system. The new effective load model includes capacities and uncertainties of generators as well as transmission lines. The CMELDC(composite power system effective load duration curve) based on the new effective load model at HLll(Hierarchical Level H) has been developed also. The CMELDC can be obtained from convolution integral processing of the outage capacity probabilistic distribution function of the fictitious generator and the original load duration curve given at the load point. It is expected that the new model for the CMELDC proposed in this study will provide some solutions to many problems based on nodal and decentralized operation and control of an electric power systems under competition environment in future. The CMELDC based on the new model at HLll will extend the application areas of nodal probabilistic production cost simulation, outage cost assessment and reliability evaluation etc. at load points. The characteristics and effectiveness of this new model are illustrated by a case study of MRBTS(Modified Roy Billinton Test System).

• Journal of Food Hygiene and Safety
• /
• v.25 no.3
• /
• pp.278-280
• /
• 2010

This study was aimed to develop a novel qualitative multiplex polymerase chain reaction (PCR) for simultaneous detection of genetically modified (GM) soy and maize within a single reaction. The specific primers designed to detect four respective GM events (A2704-12, MON88017, Bt11, and MON863) were included in the tetraplex PCR system. Each of PCR products for four GM events could be distinguished by agarose gel based on their different lengths. The specificity and reproducibility of this multiplex PCR were evaluated. This multiplex PCR consistently amplified only a fragment corresponding to a specific inserted gene in each of the four GM events and also amplified all four of the PCR products in the simulated GM mixture. These results indicate that this multiplex PCR method could be an effective qualitative detection method for screening GM soy and maize in a single reaction.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.3
• /
• pp.19-26
• /
• 2013

As the Medical Serious Games are recently proven effective, the quality evaluation of the game has become an important issue. In quality evaluation, objective criteria and evaluation elements are important. Quality evaluation of the serious game is divided into two areas : the technical (from the point of view of Program) and the non-technical (from the point of view of Content). In this study, we developed the quality evaluation element of the non-technical area to the psychotherapy and the health & rehab game according to developing process of quality evaluation model. We extracted five evaluation elements from the two kinds of medical games, and interviewed with medical experts in order to ensure the validity of them. The goodness of fit tests for the elements mentioned above were verified by conducting. Chi-square test results for the two groups did not differ significantly. In conclusion, we expect to take advantage of the results of this study to design and develop serious games for medical treatment.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.6
• /
• pp.421-428
• /
• 2019

This study developed an evaluation system of adaptation countermeasures for climate change in the water resources sector using the Analytic Hierarchy Process (AHP), and the assessment procedures were applied to the Second Chungcheongnam-do Climate Change Adaptation Implementation Plan (Chungnam Implementation Plan). Firstly, the evaluation criteria are composed of two levels according to the hierarchical structure, and AHP gives priority to 4 evaluation criteria of the first level and 16 alternative indicators of the second level. Secondly, after the importance of the evaluation criteria or indicators has been determined, the significance of each measure was evaluated by applying it to the water-sector measures of the Chungnam Implementation Plan, and the effectiveness of the evaluation system was validated. The Chungnam case study shows that the evaluation system will be more effective and efficient when it is applied during development phase rather than after the implementation plan is finalized. It is also expected that the evaluation system will be used to evaluate and prioritize climate change adaptation policies in other regions, and then to compare the means of adaptation to climate change in various regions and to select recommendation policies.