• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.899-915
• /
• 2018

In this study, in order to construct an eco-friendly advanced road transportation network, the multi-layer tunnel, which is a small-sized car road, is designed to have a height of less than 60 cm. However, the shape of the tunnel is low and the height of the traffic sign is small. In order to solve these problems, traffic sign characters were designed in three dimensions, and the possibility of applying the design of the three - dimensional sign that can obtain greater visibility than the existing signs at the same distance and the possibility verification through virtual simulation were performed. The three-dimensional sign is horizontally installed on the ceiling of the multi-layer tunnel. To be seen vertically, it is enlarged by a certain ratio by the perspective, and the width and height are enlarged. Respectively. In addition, 3D simulation was performed to verify the visibility of the stereoscopic signs when the driver ran through the stereoscopic sign design specifications. As a result of the design and experimental study, it was confirmed that the stereoscopic sign could be designed through the theoretical formula and that it could provide the driver with a larger traffic sign character because there is no limitation of the facility limit compared to the existing vertical traffic sign. Also, we confirmed that it can be implemented in the side wall by using the stereoscopic sign design principle installed on the ceiling part. It was confirmed that the design of the stereoscopic sign can be designed to be smaller as the distance that the driver visually recognizes the sperm is shorter, the height of the protrusion vertically at the lower part of the stereoscopic sign becomes higher. As a result of 3D simulation running experiment based on the design information of the stereoscopic sign, it was confirmed that the stereoscopic sign is visually the same as the vertical sign at the planned distance. Although the detailed research and institutional improvement of stereoscopic signs have not been made in Korea and abroad, it is evolved into a core technology of new road traffic facilities through various studies through the possibility of designing and applying stereoscopic signs developed through this study Expect.

• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.639-645
• /
• 2018

The objective of the study is to analyze the impact of zone adjustment by comparing the changes from 2011 to 2018 of social and environmental factors such as the special-purpose area, actual construction activities including building development, land use environment, and officially assessed individual land price in the areas released from the National Park Zone during the second National Park Zone adjustment during 2010 to 2011 with the social and environmental factors in the areas that remained in the National Park Zone during the same period. We intended to investigate the problems of the second National Park Zone adjustment and explore alternative implications for the third National Park Zone adjustment. As for the special-purpose area, 80.4% of the released areas were converted to planned, production, and conservation area while 15.6% changed to the agricultural area, and 4.0% remained as the natural environmental conservation area. Regarding the change in building development scale, the average size of construction in the released area since 2011 was $106m^2$ while that in the retained areas was $91m^2$. For the land use environment, the rate of change from the natural area to developed area was 1.9% in the released area and 0.7% in the retained area. The officially assessed individual land price increased by 11,911 won in the released area and 4,413 won in the retained area. Although both areas showed an increase in the land price, the difference of officially assessed individual land prices was about 2.5 times. The problem concerning the private property rights of local residents in the national parks is still a challenge, but the second National Park Zone adjustment has resolved the problem significantly. Accordingly, it is necessary to offer the benefits for the residents in the national park area by analyzing the park zoning and park facility planning to present the rational alternative. It is also necessary to establish a support system that encourages the collaborative cooperation between the park authority and residents and assures that the residents to have pride in the national park.

• Journal of Climate Change Research
• /
• v.2 no.4
• /
• pp.283-295
• /
• 2011

Many actions against climate change have been taken to reduce greenhouse gases (GHGs) emissions at home and abroad. As of 2007, the GHGs emitted from buildings accounted for about 23 % of Korea's total GHGs emission, which is the second largest GHG reduction potential following industry. In this study, we introduced Carbon Zero Building (CZB), which was constructed by the National Institute of Environmental Research to cut down GHGs from buildings in Korea, and evaluated the main applied technologies, the amount of energy load and reduced energy, and economic values for CZB to provide data that could be a basis in the future construction of this kind of carbon-neutral buildings. A total of 66 technologies were applied for this building in order to achieve carbon zero emissions. Applied technologies include 30 energy consumption reduction technologies, 18 energy efficiency technologies, and 5 eco-friendly technologies. Out of total annual energy load ($123.8kWh/m^2$), about 40% of energy load ($49kWh/m^2$) was reduced by using passive technologies such as super insulation and use of high efficiency equipments and the other 60% ($74.8kWh/m^2$) was reduced by using active technologies such as solar voltaic, solar thermal, and geothermal energy. The construction cost of CZB was 1.4 times higher than ordinary buildings. However, if active technologies are excluded, the construction cost is similar to that of ordinary buildings. It was estimated that we could save annually about 102 million won directly from energy saving and about 2.2 million won indirectly from additional saving by the reduction in GHGs and atmospheric pollutants. In terms of carbon, we could reduce 100 ton of $CO_2$ emissions per year. In our Life Cycle Cost (LCC) analysis, the Break Even Point (BEP) for the additional construction cost was estimated to be around 20.6 years.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.11-19
• /
• 2018

This study was conducted to develop the manufacturing method of biochar using pruned stems of pear tree and its application effect on the crop growth and soil physico-chemical properties. In this study, biochar derived from pruned stems of pear tree at heating temperature of $300^{\circ}C$, $500^{\circ}C$ and $700^{\circ}C$ in heating times of 2, 3 and 4 hours, were tested in the changes of their chemical properties during biochar processing. The pH, Exch. K, Exch. Mg and cation exchange capacity (CEC) increased as the pyrolysis temperature increased during the production of biochar, and the change of these properties rapidly occurred at $500^{\circ}C$. However, as the pyrolysis temperature increased, ash content increased and total carbon (T-C), yield decreased. And the change of the properties in response to the heating time was not shown. It was thought that it would be desirable to set the production conditions of biochar at $500^{\circ}C$ for 2 hours in consideration of the change of chemical properties and the ash content and yield. And also, were conducted the experiments to establish manufacturing method of farm-made biochar using drum biochar manufacturing machine and investigate the application effects of biochar on the cultivation of chinese cabbage and tomato. Application of biochar derived from pruned stems of pear tree could enhance pH, organic matter (OM), total carbon (T-C) of soil. On the other hand, soil electrical conductivity (EC), NO3-N were lowered compared to the control which has no application. The bulk density, porosity and aggregate formation of soil were improved by biochar application. The fresh matter yields of chinese cabbage and tomato were significantly increased in proportion to the application rate of biochar. This study demonstrated the effect of the biochar derived from agricultural byproduct to be as a low cost potential soil ameliorant by physico-chemical properties in eco-friendly greenhouse cultivation.

• Korean Journal of Poultry Science
• /
• v.46 no.2
• /
• pp.55-63
• /
• 2019

This study was conducted to evaluate animal welfare approved farms in three housing systems (open, windowless, and free-range). The survey was conducted in 25 animal welfare approved farms, and 10 farms were surveyed for distribution status. The main breed in all animal welfare approved farms of laying hens was Hy-Line Brown variety. In the case of open house, laying hens were bred in traditional and panel houses simultaneously; however, the ratio of panel house was 58.3%, which was higher than that of the traditional house. All the windowless houses were made of panels and more than 15,000 laying hens were housed in a single windowless house. In the case of free-range house, it was maintained on a small scale of less than 12,000 birds. Fifty-six percent of the surveyed farms were breeding at $7{\sim}8birds/m^2$. In terms of male and female ratios, most farms maintained 1 male:15 females, but there was a farmhouse that switched 17 or 20 females to 1 male. The daily dietary allowance was 110~170 g, and 32% of the surveyed farms provided feed of more than 150 g/day, which showed that forage feed was important. The age of at the first egg was 123 days, 122 days, and 120 days, and the peak percent was 91.8%, 94.9%, and 86.5% in open, windowless and free-range houses, respectively. The average egg production rate was 74.0%, 84.6%, and 72.7% in open, windowless, and free-range houses respectively, thus, there was no correlation between feed intake and hen-housed eggs. Distribution of welfare certified eggs was mainly a direct deal with the consumer or through contract production. The ratio of direct transactions between large-scale marts and eco-friendly specialty stores of welfare approved eggs was higher than that of conventional eggs. The rate of contract sales of eggs in both the barn and free-range systems was high, and the percentage of courier sales farms was also high. Excluding courier services, price of eggs in the barn system rose to more than 30 won/egg in the second half of 2017 (after AI). Price of eggs in the free-range system rose to more than 50 won/egg in the second half of 2017 (after AI). In the case of courier sales, the same price of 500 won was maintained before and after AI. In conclusion, the results of this study can be used as basic data for improving the animal welfare certification system for laying hens in Korea.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.226-232
• /
• 2019

The biological wastewater treatment is more eco-friendly and can be used effectively in wastewater for a variety of purposes than that of the conventional treatment. In particular, the wastewater treatment using microalgae in biological treatment processes has attracted great attention due to its ability to remove economically nutrients from wastewater and have many advantages as a renewable energy source. This study was investigated to establish the optimal growth conditions for microalga Scenedesmus obliquus. Additionally, the removal efficiencies of nutrients (N, P) and heavy metals (Cu, Zn) from the synthetic wastewater were evaluated. As a results, the optimal growth conditions were established at $28^{\circ}C$, pH 7, and light and dark cycle of 14 : 10 h. In the evaluation of nutrient removal efficiencies at each concentrations of 500, 1,000, 5,000, and 10,000 mg/L, the removal rates were 17.6~70% N and 8.4~34% P in the single treatment and 12.0~58.0% N and 3.0~40.3% P in the binary mixture treatment. In addition, the evaluation of heavy metal removal efficiencies at each concentrations of 10, 30 and 50 mg/L, the removal rates were 13.7~40.3% Cu and 10.0~30.0% Zn in the single treatment and 16.0~40.0% Cu and 12.0~20.0% Zn in the binary mixture treatment. Based on the results of the study, it appears that Scenedesmus obliquus can be used for the removal of nutrients and heavy metals from the swine wastewater.

• Journal of Life Science
• /
• v.31 no.3
• /
• pp.305-313
• /
• 2021

This study verified the antioxidant and whitening activities of a Pinus koraiensis extract (PK) and a Hibiscus cannabinus L. extract (HC), and further evaluated the interaction of the extract ingredients when mixed at a 1:1 ratio (PKHC). The electron-donating and ABTS+ radical scavenging activities of the PKHC extract at 1,000 ㎍/ml concentration were 93.7% and 94%, respectively, indicating a higher efficacy than achieved with either extract alone. Measurements of the tyrosinase the activities in response to PK, HC, and PKHC extracts at 1,000 ㎍/ml concentrations showed inhibitions of 40%, 27.5%, and 43%, respectively, confirming a higher efficacy of the mixture due to the synergistic action of the ingredients. The cell toxicity values in melanoma cells treated with PK, HC, and PKHC at 1,000 ㎍/ml concentration were 87.4%, 80.2%, and 98%, confirming a higher viability in cells treated with the mixture due to antagonism. The expression of microphthalmia-associated transcription factor (MITF), tyrosinase-related protein-1 (TRP-1), tyrosinase-related protein-2 (TRP-2), and tyrosinase protein expression determined by Western blotting decreased by 53.9%, 64.8%, 67.3%, and 56.1%, respectively, when PKHC was administered at a concentration of 100 ㎍/ml. Reverse transcription-polymerase chain reaction (RT- PCR) results also showed that PKHC at a concentration of 100 ㎍/ml inhibited the mRNA expression of MITF, TRP-1, TRP-2, and tyrosinase mRNA by 54.4%, 64.9%, 66.6%, and 63.1%, respectively. Taken together, the data confirmed the antioxidant and whitening effect of the PKHC extract and verified the possibility that this extract mixture has great potential as a cosmetic ingredient.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.4
• /
• pp.77-85
• /
• 2020

This study analyzes the effects of mixed fermented organic fertilizer on chinese cabbage growth and soil properties in order to investigate the nutritional effects of organic fertilizers, which are developed as an alternative fertilizer for imported castor oil cake. In this study, four treatments were set up: 100% and 200% rate of nitrogen application (320 kg ha-1 for Chinese cabbage) on mixed fermented organic fertilizer A(FA) and mixed fermented organic fertilizer B(FB), respectively, 100% rates of the mixed expeller cake (MEC) fertilizer, and the untreated control. Results revealed that the growth and yield of Chinese cabbage increased as more fermented organic fertilizer was used. However, while there were no significant differences in growth characteristics between treatments of 100% rate of mixed fermented organic fertilizer and 100% rate of MEC, the impacts on yields resulted similar. The nitrogen use efficiency (NUE) of Chinese cabbage was measured a range of 20-31% depending on the response to treatment. The 100% FA showed the same as NUE and nitrogen absorption with 100% rate of MEC. Regarding soil properties after cultivation, there were no significant differences among the effects of fertilizers in pH, EC, soil organic matter, and available phosphate. However, the content of exchangeable cations(K, Ca, Mg) was higher in areas treated with mixed fermented organic fertilizer than in untreated areas. Furthermore, the bacterial population density in the soil was higher in areas treated with mixed fermented organic fertilizer than in untreated areas and increased as more mixed fermented organic fertilizer was used. There were no significant differences in the population density of actinomycetes and fungi when fertilizer was applied to the soil. These results also show that FA, as a alternative organic fertilizer for imported castor oil cake, has similar nutritional effects as that of MEC. Therefore, further research the appropriate amounts of fertilizer is required to achieve economical and eco-friendly nutrient management.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.262-273
• /
• 2020

Amending biopolymers such as β-glucan (BG) and Xanthan gum (XG) generally enhances soil strength by ionic and hydrogen bonds between soil particles. Thus, biopolymers have been studied as eco-friendly construction materials in levees. However, physiological responses of plants grown on soil amended with biopolymers are not fully understood. This study focuses on the effects of biopolymers on the growth of Camelina sativa L. (Camelina) under excess zinc (Zn) stress. The optimal concentrations of BG and XG were confirmed to have a 0.5% ratio in soil depending on the physiological parameters of Camelina under excess Zn stress. The Zn binding capacity of biopolymers was investigated using 1,5-diphenylthiocarbazone (DTZ). The reduction of Zn damage in Camelina was evaluated by analyzing the Zn content and expression of heavy metal ATPase (HMA) genes under excess Zn stress. Amendments of BG and XG improved Camelina growth under excess Zn stress. In DTZ staining and ICP-OES analysis, Camelina grown on BG and XG soil showed less Zn uptake than normal soil under excess Zn stress. The Zn-inducible CsHMA3 gene was not stimulated by either BG or XG amendment under excess Zn stress. Moreover, both BG and XG amendments in soil exhibit Zn-stress mitigation similar to that of Zn-tolerant CsHMA3 overexpres sed Camelina. These results indicate that biopolymer-amended soils may influence the prevention of Zn absorption in Camelina under excess Zn stress. Thus, BG and XG are proven to be suitable materials for levee construction and can protect plants from soil contamination by Zn.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.