• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2009

For several decades, many researchers have been involved in developing recycling methods for FRP boats. There are four basic classes of recycling covered in the literature. Despite of environmental problems(safety hazards), mechanical recycling of FRP boats, which involves shredding and grinding of the scrap FRP, is one of the simpler and more technically proven methods than incineration, reclamation or chemical ones. Because FRP is made up of reinforced fiber glass, it is very difficult to break into pieces. It also leads to secondary problem in recycling process, such as air pollution and unacceptable shredding noise level. Another serious problem of mechanical FRP recycling is very limited reusable applications for the residue. This study is to propose a new and efficient method which is more wide range applications and environment friendly waste FRP regenerating system. New system is added with the cyclone sorting machine for airborne pollutions and modified cutting system for several glass fiber chips sizes. It also has shown the FRP chip fiber-reinforced concrete and fiber-reinforced secondary concrete applications with the waste FRP boat to be more eligible than existing recycling method.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.23-28
• /
• 2009

There is several ways of recycling methods for waste FRP boats. The main one is mechanical recycling that is one of the simple and technically proven methods. It recently has been reported that FRP can be recycled by separating into laminated glass fiber layers instead of crushing into powder. Even though the mechanical recycling is a good way for the eligibility of laminated glass fiber reinforced material, the system should have another option which can collect resin of FRP. Because the resin is still very useful renewable energy source, that cannot be discarded, But FRP is made up of laminated glass fiber(roving cloth layer) which is fire retardant substances and very hard to break into each layer. Due to the high cost of fossil energy the waste plastics should be regenerated to the source of renewable energy. Laminated glass fiber which is recyclable in a very limited way, is currently a serious barrier to waste FRP boat regenerating. This study is to propose a new extracting method which is efficient and environment friendly FRP waste regenerating system. The recycled glass fiber which is obtained by the separation of the roving layer from FRP waste has been found to be useful for concrete(FRC) products or concrete(FRC) structures as fiber reinforced material. And it can be successively applied to renewable energy applications using the waste resins of FRP residue without laminated glass fiber.

• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.272-278
• /
• 2016

Porous pavements are recommended as a Low-Impact Development (LID) method which is a strategy to develop a water cycle as close to a natural state as possible, and to solve the urban impervious surface problems. Porous pavements can yield a solution if it provides a more permeable surface with extra space to contain extra water from building roofs. But there are few applications in Korea because of a lack of recognition and experience. Highway engineers are mainly concerned about the infiltration of water into pavement structures. They worry about the weakening of the asphalt mixture and subgrade, and freezing during the winter season due to the infiltration of water. Meanwhile, hydrological experts doubt the effects of the amount of water to control during the flooding season, and environmental experts prefer a non-point pollution treatment system established beside highway. In this study, from reviewing the history and the body of literature about porous pavements, conclusions regarding the most advanced technologies were made. First, traditional thickness designs can be used for porous pavement, no extra distresses was found by weakening and freezing during the winter season. Second, hydrological design can be made by controlling the thickness of the pavement and the outlet of water. Third, the treatment efficiency of non-point pollution of porous pavements is not worse than any other method. Importantly, it's a more eco-friendly solution because of its lower requirement for de-icing agents.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.51-60
• /
• 2015

In Korea, 69.4 % of duck farms had utilized conventional plastic greenhouses. In this facilities, there are difficulties in controlling indoor environments for raising duck. High rearing density in duct farms also made the environmental control difficult resulting in getting more stressed making their immune system weaker. Therefore, a facility is needed to having structurally enough solidity and high efficiency on the environmental control. So, new design plans of duck house have recently been conducted by National Institute of Animal Science in Korea. As a study in advance to establish standard, computational fluid dynamics (CFD) was used to estimate the aerodynamic problems according to the designs by means of overall and regional ventilation efficiencies quantitatively and qualitatively. Tracer gas decay (TGD) method was used to calculate ventilation rate according to the structural characteristics of duck houses including installation of indoor circulation fan. The results showed that natural ventilation rate was averagely 164 % higher than typically designed ventilation rate, 1 AER ($min^{-1}$). Meanwhile, mechanically ventilated duck houses made 81.2 % of summer ventilation rate requirement. Therefore, it is urgent to develop a new duck house considering more structural safety as well as higher efficiency of environmental control.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.435-440
• /
• 2011

In this experiment, two inclusion levels (15 and 30% of diets, as-fed basis) of brown rice (BR) were tested against a control diet with 0% BR (51% wheat flour of diet). Six female Maltese (8~9 months age, initial mean body weight of $2.8{\pm}0.3$ kg) were assigned to treatments in replicated $3{\times}3$ Latin square design. Total tract digestibilities of DM, OM, acid hydrolyzed fat, CP and gross energy by dogs fed experimental diets responded quadratically (P<0.01 or <0.05) to BR inclusion levels. Similarly, quadratic responses (P<0.001, P=0.015) were observed for digestible energy and metabolizable energy values, respectively. Wet and dry fecal output also exhibited quadratic responses (P=0.006, P=0.014, respectively) but no differences were observed between control and BR 30% diets. Linear (P=0.008) effect was observed for fecal score in dogs fed BR, and fecal ammonia concentration increased linearly (P=0.001) in response to increasing BR inclusion levels. It seems that the increase in fecal ammonia concentration may be partially related to the decrease tendency (P=0.07) in short-chain fatty acid concentration. In this experiment, inclusion of BR in dog diet did not result in pronounced changes in the digestibility but in fecal score. Although inclusion of BR in diets showed profound positive effect on fecal score, it is confounded by the high inclusion level of poultry offal meal.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.4
• /
• pp.119-132
• /
• 2012

The unmanaged abandoned concrete roads are vulnerable toward the issues on soil and water pollution, which requires flexible managing method such as eco-corridor after the process of ecological restoration. Among various alternations of abandoned concrete-paved roads, ecological restoration technique may be the most suitable method in sites including high quality of natural environment. Therefore, as in Young dong province, GyungBu express highway (227.24~229.04km), which is near to Hwang-gan IC, the survey to measure its effect of soil under the paving and water pollution by abandoned concrete roads was discussed. Then, the restoration method of plantings of landscape trees and hydro-seeding methods of artificial soil media was appraised through consecutive monitoring. The soil adequacy analysis shows lower percentage of heavy metal substance in each depth level compared to standard limit stated by the Ministry of Environment, along with low concerns raised after the analysis on heavy metal content of the spilled water on the concrete roads. Meanwhile, Korean Weigela (Weigela subsessilis L.H. Baily) was found to be withered in small-scale landscape trees planting sites. Among the seeding plants. the family of leguminosae, Silene armeria, Dendranthema boreale, Caryopteris incana and Aster yomena show good establishment results. Overall studies on planting of small and large landscape trees, planting method of container plants, planting method of ground cover plants, and germination and development trend of seeding plants of the experimental restoration site on abandoned concrete roads are revealing specific trends in the way landscape woody plants establishment and growth. Finally, this study suggests further studies and survey on varied plant restoration methods on abandoned concrete-roads for developed design guidelines of their methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.716-722
• /
• 2017

In this paper, a fully printed NFC tag operating at 13.56 MHz was designed and fabricated using silver nano-paste and carbon ink. The proposed NFC tag has a printed coil with an inductance of $2.74{\mu}H$ on a PI film for application to an NFC tag IC with an internal capacitance of 50 pF. Screen printing technology used in this paper has advantages such as large area printing for mass production, low cost and eco-friendly process compared to conventional PCB manufacturing process. The proposed structure consists of a circular coil implemented as a single layer using silver nano-paste and carbon ink, a jumper pattern for chip mounting between the outer edge and the center of the coil, and an insulation pattern between the coil and the jumper pattern. In order to verify the performance of the proposed NFC tag, we performed the measurements of the printing line width, thickness, line resistance, adhesion and environmental reliability, and confirmed the suitability of the NFC tag based on the full-printed manufacturing method.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.33-42
• /
• 2013

This study which are recognized that the lack of empirical research about the efficiency of the elements of environmentally friendly housing development planned presented housing design elements and policies to revitalize for the reduction of greenhouse gas emissions by analyzing the effectiveness of reduction of greenhouse gas output. In addition, it used various models of DEA which are accepted until now effective technique to evaluate the performance of the organization. In conclusion, there are effective 5 regionals which are Seoul, Incheon, Ulsan, South Chungcheong Province, South Gyeongsang Province. other regionals was analyzed to be inefficient. The conclusion from this study are as follows: First, in case of 11 regionals which are analyzed to be inefficient, they have to difference plan elements to make up. So each region should establish strategy to complement vulnerability. Second, not only internal architectural factors but institutional, and external environmental factors also affect the reduction of greenhouse gas emissions. And weighted scores also were moderately high. But levels of weighted scores still less than the ratio of Good quality housing. So it can be determined that evaluation of individual architecture still considered important. It need to pay more attention to the operating system and the external environmental factors.

• Land and Housing Review
• /
• v.10 no.3
• /
• pp.43-55
• /
• 2019

The purpose of this study is to derive indicators and development directions to be considered when planning new towns in the Seoul metropolitan area as new towns are planned to be built. To this end, the following implications were derived after analyzing the survey data of experts in each field using Frequency Analysis and Analysis of Variance(ANOVA) technique. First, the assessment results of the existing first and second phase new towns showed that there were many negative assessments of citizen participation and information sharing, smart technologies and services, social and cultural diversity and inclusion. Regarding the third phase new town, experts said that the most important indicators are accessibility and convenience of transportation, environmental comfort, quality and service of residence. In addition, experts cited the superiority of landscape/design, jobs/self-sufficiency and social/cultural diversity as important indicators. Second, after examining whether the perceptions and assessments of experts differ depending on individual characteristics such as gender, age, occupation, and professional field, the first and second phase new towns showed significant differences only in "gender", and the third phase new town had significant differences in "gender" and "professional field". Third, experts thought that changes in population structure, industry and jobs, quality of life and diversity, environment and climate change, and social and residential welfare should be considered important in the planning of third phase new town. In addition, experts considered expanding park and self-sufficient land as important in the land use plan, and ranked eco-city as a desirable type of the city, and public transportation facilities, park areas and education facilities as the most important living infrastructure.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.118-128
• /
• 2016

As the interest on the air-pollution is gradually rising up at home and abroad, automotive and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward two main issues : exhaust emission and PM (particulate matter) particle emissions of gasoline vehicle. Exhaust emission and PM particle of automotive had many problem that cause of ambient pollution, health effects. In addition, researcher studied the environment problems of the MTBE contained in the fuel as oxygenate additives. The researchers have many data about the health effects of ingestion of MTBE. However, the data support the conclusion that MTBE is a potential human carcinogen at high doses. Based on the oxygenated fuel additive types (MTBE, Bio-ETBE, Bio-ethanol, Bio-butanol), this paper discussed the influence of oxygen contents on gasoline fuel properties and evaporative emission characteristics. Also, this paper assessed the acceleration and power performance of gasoline vehicle for the fuel property.