• 한국전산구조공학회논문집
• /
• 제13권2호
• /
• pp.165-178
• /
• 2000

본 연구에서는 고속철도차량(TGV)이 교량 상을 통과할 경우 교량의 동적 거동을 해석하기 위한 단순화된 3차원 차량-교량 상호작용해석 모델을 제시한다. 축하중 편심 모델링 방법을 도입하여 교량에 작용하는 축하중에 의한 비틀림력과 교량의 비틀림 회전변위의 영향을 고려하여 보다 정확한 교량의 거동에 대한 해석 결과를 얻는다. 앞기관차, 뒷기관차, 객차들에 대해서 운동에너지, 포텐셜에너지, 감쇠에너지를 차량과 교량의 자유도로 각각 나타내고, Lagrange의 운동방정식을 적용하여 차량과 교량의 운동방정식을 유도한다. 또한, 차량-교량 사이에 상호작용을 고려하여 교량에 작용하게 되는 하중에 관한 식을 유도하며, 이러한 하중을 받는 교량의 운동 방정식이 구성된다. 시간경과에 따라 차량의 위치를 결정하면서 그 위치에 따른 차량-교량 시스템의 질량행렬, 강성행렬, 감쇠행렬, 그리고 하중벡터를 구성할 수 있고, Newmark의 β방법(평균가속도법)을 이용하여 전체 차량-교량 시스템의 거동을 해석한다.

• 한국강구조학회 논문집
• /
• 제11권2호통권39호
• /
• pp.201-212
• /
• 1999

탄성 경계에 의해 지지된 보는 브레이스된 보나 철도 궤도와 같은 구조 부재로서 사용된다. 이러한 탄성 경계는 단면의 임의의 점에 위치할 수 있다. 본 논문은 탄성 경계를 가진 보의 탄성 좌굴에 미치는 경계의 편심과 강성의 효과를 고찰하였다. 유한 요소 정식화를 통해 탄성 경계를 가진 보-요소와 해석 프로그램을 개발하였다. 탄성 경계는 탄성 스프링 요소를 사용하였으며 탄성 경계의 편심을 고려하기 위하여 옵셋(offset) 기법을 사용하였다. 보-요소는 딤 자유도를 고려하여, 요소당 14개의 자유도를 갖는 직선 보-요소를 사용하였다. 많은 수치 해석을 통해, 본 연구에서 개발한 좌굴 해석 프로그램이 탄성 경계를 가진 보의 탄성 좌굴 하중과 모드를 정확하게 산출함을 알 수 있다.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.111-122
• /
• 2019

This paper presents an experimental work on the post-fire behavior of two kinds of innovative composite stub columns under eccentric compression. The partially precast steel reinforced concrete (PPSRC) column is composed of a precast outer-part cast using steel fiber reinforced reactive powder concrete (RPC) and a cast-in-place inner-part cast using conventional concrete. Based on the PPSRC column, the hollow precast steel reinforced concrete (HPSRC) column has a hollow column core. With the aim to investigate the post-fire performance of these composite columns, six stub column specimens, including three HPSRC stub columns and three PPSRC stub columns, were exposed to the ISO834 standard fire. Then, the cooling specimens and a control specimen unexposed to fire were eccentrically loaded to explore the residual capacity. The test parameters include the section shape, concrete strength of inner-part, eccentricity ratio and heating time. The test results indicated that the precast RPC shell could effectively confine the steel shape and longitudinal reinforcements after fire, and the PPSRC stub columns experienced lower core temperature in fire and exhibited higher post-fire residual strength as compared with the HPSRC stub columns due to the insulating effect of core concrete. The residual capacity increased with the increasing of inner concrete strength and with the decreasing of heating time and load eccentricity. Based on the test results, a FEA model was established to simulate the temperature field of test specimens, and the predicted results agreed well with the test results.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.437-450
• /
• 2022

When the vertical load-bearing members in high-rise structures fail locally, the beam-column joints play an important role in the redistribution of the internal forces. In this paper, a static laboratory test of three full-scale flush flange beam-reinforced connections with side and cover plates (CP-FBSP connection) with double half-span steel beams and single L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) was conducted. The influence of the side plate width and cover plate thickness on the progressive collapse resistance of the substructure was thoroughly analyzed. The failure mode, vertical force-displacement curves, strain variation, reaction force of the pin support and development of internal force in the section with the assumed plastic hinge were discussed. Then, through the verified finite element model, the corresponding analyses of the thickness and length of the side plates, the connecting length between the steel beam flange and cover plate, and the vertical-force eccentricity were carried out. The results show that the failure of all the specimens occurred through the cracking of the beam flange or the cover plate, and the beam chord rotations measured by the test were all greater than 0.085 rad. Increasing the length, thickness and width of the side plates slightly reduced the progressive collapse resistance of the substructures. The vertical-force eccentricity along the beam length reduced the progressive collapse resistance of the substructure. An increase in the connecting length between the beam flange and cover plate can significantly improve the progressive collapse resistance of substructures.

• 전산구조공학
• /
• 제5권1호
• /
• pp.119-132
• /
• 1992

반복하중을 받는 짧은 I보(Beam)의 횡-비틀림 좌굴(Lateral-Torsional Buckling)에 대한 광범위한 Parametric Study를 수행하여 보의 좌굴현상을 좀 더 깊이 고찰하고자 한다. 유한한 비틀림변형의 뒤틀림(Warping)이외에 미소한 절단변형의 뒤틀림도 고려한 기하학적(완전) 비선형의 일차원 보를 해석적 모델로 사용하고, 또한 금속의 주기적소성(Cyclic Plasticity)거동을 보다 잘 나타내기 위해 다축 주기적소성모델을 Consistent Return Mapping Algorithm과 결합시켜 적용한다. 기준치 근방에서 아래와 같은 여러가지 Parameter Study를 수행하므로써 반복하중을 받는 짧은 I보의 횡-비틀림 좌굴의 일반적 응답을 고찰한다 : 재료의 강복강도, 강복플래토(Yield Plateau), 변형율경화, 이동경화(Kinematic Hardening), 잔류응력, 작용하중의 절단중심에 대한 편심률, 작용하중의 보 단면에 대한 높이, 작용하중의 보 길이방향의 위치, 보 단면의 치수, 작용하중으로부터 멀리 떨어진 지지단의 고정도.

• 한국강구조학회 논문집
• /
• 제22권6호
• /
• pp.563-572
• /
• 2010

본 연구는 편심 브라켓이 설치된 온도프리스트레싱 강재보의 하중저항 성능에 관한 실험적 연구이다. 본 연구에서 제안한 강재보는 편심 브라켓을 이용하여 온도프리스트레싱 강판을 편심 설치하여, 기존 온도프리스트레싱 강재보 보다 도입되는 프리스트레스 및 단면강성을 증대 할 수 있다. 제안하고자 하는 공법의 검증을 위하여 편심 브라켓이 설치된 강재보, 온도프리스트레싱 강재보 등에 대한 정적하중 재하시험을 실시하여 강재보의 하중저항 성능을 비교 평가하였다. 또한 재료비선형성을 고려한 강재보의 구조해석을 실시하고 소성이론에 근거한 극한하중평가를 통하여 실험결과의 타당성 및 실설계에 대한 적용성을 검토하였다. 본 연구결과를 통하여 편심 브라켓이 설치된 온도프리스트레싱 강재보가 기존 온도프리스트레싱 강재보 보다 증가된 보강강판의 편심효과로 강성, 항복하중 및 극한하중이 모두 증가됨을 확인하였다.

• 전기학회논문지P
• /
• 제60권2호
• /
• pp.82-90
• /
• 2011

The small precision spindle motors in the high value-added products including the visible home appliances such as DLP projector require not only the energy conversion devices but also high efficiency, low vibration and sound operation. However, the spindle motors using the conventional ball bearing and sintered porous metal bearing have following problems, respectively: the vibration by the irregularity of balls and the short motor life cycle by the ball's abrasion and higher sound noises by dry contact between shaft and sleeve. In this paper, it is proposed that the spindle motor with a fluid dynamic bearing is suitable for the motor to drive the color wheel of the DLP(digital lightening processor) in the visible home appliances. The proposed spindle motor is composed of the fluid dynamic bearing with both the radial force and the thrust force. The fluid dynamic bearing is solved by the finite element analysis of the mechanical field with the Reynolds equations. The magnetic part of spindle motor, which is a type of Brushless DC Motor, is designed by the electro-magnetic field analysis coupled with the Maxwell equation. And the load capacity and the friction loss of fluid dynamic bearing are analyzed to bearing clearance variation by the fabrication error in designed motor. The design of the proposed motor is implemented by the load torque caused by the eccentricity and the unbalance of the fluid dynamic bearing when the motors are fabricated in error. The prototype of the motor with the fluid dynamic bearing is manufactured, and experiment results show the vibration, sound, and phase current at no load and color wheel load of the motors in comparison. The high performance characteristics with the low vibration, the low acoustic noise and the optimal mechanical structure are verified by the experimental results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.455-462
• /
• 2003

The current practice of estimating bearing capacity usually employs the conventional bearing capacity formula originally developed for strip footings under vertical central loading, In order account for the effect of footing shape and eccentricity and inclination of loads, correction factors are introduced in the formula, which are derived based on a number of small-scale model test observations. In this paper, comparison of several formulations of bearing capacity factors, as well as values of these factors, are presented. And the conventional bearing capacity equations are compared with some of other failure loci proposed for cohesive soil. Also, the bearing capacity of shallow foundation estimated by the conventional bearing capacity equations are compared with the experimental load test results.

• Earthquakes and Structures
• /
• 제5권6호
• /
• pp.753-779
• /
• 2013

One of the most important issues in progressive collapse mechanism of the buildings is evaluation of the collapse distribution in presence of the earthquake loads. Here, collapse propagation is investigated by tracking down the location and type of the collapsed beam and column elements, from the first element to the entire buildings. 6-story reinforced concrete ordinary moment resisting frame buildings with one directional mass eccentricity of 0%, 5%, 15% and 25% are studied to investigate differences among the progressive collapse mechanism of the regular and irregular buildings. According to the results of the nonlinear time history analyses, there are some patterns to predict progressive collapse scenarios in beam and column elements of the similar regular and irregular buildings. Results also show that collapse distribution patterns are approximately independent of the earthquake records.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1576-1580
• /
• 2007

Typical lip seals are widely used as sealing mechanism of rotary and reciprocating shaft. Double lip seal has comparatively high stiffness and dynamic radial eccentricity. Usually material of these seals is made of elastomer and nonlinear finite element analysis is required to analyze behaviour of this material because Young's modulus is varied with working load. In this paper, MSC MARC/MENTAT is used for nonlinear analysis of double lip seal with pressure variation and interference. The contact normal force of double lip seal between lip and shaft is analyzed to reduce power loss when shaft rotates.