Browse > Article

Load-carrying Capacity of Thermal Prestressed Steel Beam with Eccentric Bracket  

Kim, Sang-Hyo (연세대학교 토목.환경공학과)
Jung, Chi-Young (연세대학교 토목.환경공학과)
Choi, Kyu-Tae ((주)유호산업개발 기술연구소)
Ahn, Jin-Hee (연세대학교 토목.환경공학과)
Publication Information
Journal of Korean Society of Steel Construction / v.22, no.6, 2010 , pp. 563-572 More about this Journal
Abstract
This study evaluates the load-carrying capacity of a thermal prestressed steel beam with an eccentric bracket. The steel beam that is proposed in this study has an eccentrically installed cover plate through application of the eccentric bracket. The eccentric bracket helps the steel beam achieve greater sectional stiffness and more efficiently induces prestress. A material non-linear characteristic applied finite element analysis was also conducted to check the validity of the experiments. The results of this study showed that the structural stiffness, yield load, and ultimate strength of the TPSM-applied steel beam with the eccentric bracket increased due to the eccentricity of the cover plate.
Keywords
steel bracket; thermal prestressing; load-carrying capacity; loading test;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Dall'Asta, A. and Leoni, G. (2002) Failure mechanisms of externally prestressed composite beams with partial shear connection, Steel Compos Struct, Vol. 2, No. 5, pp.315-330.   DOI
2 Lorenc, W. and Kubica, E. (2004) Nonlinear modeling of composite beams prestressed with external tendons, Archives Civil Mech Eng, Vol. 4, pp.83-93.
3 Saadatmanesh, H., Albrecht, P., and Ayyub, B.M. (1989) Experimental Study Prestressed Composite Beams, Journal of Structural Engineering, ASCE, Vol. 115, No. 9, pp.2348-2363.   DOI
4 Sakano, M., Namiki, H., Yajima, S., Koide, Y., Furuta, H., and Frangopol, D.M. (2006) Monitoring of Steel Railway Floor Beams Prestressed by Steel Plates, Journal of Bridge Engineering, Vol. 11, No. 6, pp. 681-687.   DOI
5 Shiming, C. and Ping, G. (2005) Load carrying capacity of composite beams prestressed with external tendons under positive moment, Journal of Constructional Steel Research, Vol. 61, pp.515-530.   DOI   ScienceOn
6 Wojciech, L. and Ernest, K. (2006) Behavior of composite beams prestressed with external tendon: Experimental study, Journal of Constructional Steel Research, Vol. 62, pp.1353-1366.   DOI   ScienceOn
7 건설교통부(2005) 도로교 설계기준, 한국도로교통협회.
8 경용수, 안병국, 방진환, 김문영(2005) H형강과 고강도 강판으로 복합단면을 구성하는 프리스트레스트 플레이트거더의 개발, 한국강구조학회 논문집, 한국강구조학회, 제17권, 제5호, pp.637-648.
9 김상효, 안진희, 김준환, 김형주(2006) 커버플레이트의 온도변형을 이용한 강구조물의 다단계 프리스트레싱, 한국강구조학회 논문집, 한국강구조학회, 제18권, 제6호, pp. 783-792.
10 김상효, 김준환, 안진희(2006) 다단계 온도프리스트레싱을 이용한 강거더교의 보강에 관한 연구, 한국강구조학회 논문집, 한국강구조학회, 제18권, 제6호, pp.717-726.
11 박용걸, 박영훈, 이승용(2000) 외부 후 긴장 공법을 이용한 강합성보의 보강에 관한 연구, 한국강구조학회 논문집, 한국강구조학회, 제12권, 제5호, pp.594-558.
12 안진희, 김준환, 정치영, 김상효(2007) H형강 교량의 성능개선을 위한 다단계 온도프리스트레싱 효과 분석, 한국강구조학회 논문집, 한국강구조학회, 제19권, 제5호, pp.527-537.
13 임성순, 정찬핵(2006) 프리스트레스된 압연강재보(H-BEAM) 의 휨 거동에 대한 실험적 연구, 한국강구조학회 논문집, 한국강구조학회, 제18권, 제2호, pp.239-250.