• Korea journal of population studies
• /
• v.23 no.2
• /
• pp.189-207
• /
• 2000

Focusing on the factors related to the amount of contact between young married women and their noncoresident parents and their noncoresident parents-in-law, the study hypothesized two scenarios. (1) filial piety scenario which predicts that the contact with one set of parents is not affected by accessibility of other set of parents, and (2) competition scenario which predicts that ease of contact with one set of parents inhibits contact with other set of parents. These scenarios were tested against the data from National Fertility and Family Health Survey in 1994. The regression analysis of intergenerational visits appeared to support the competition scenario : The parents-in-law and the parents seem to bs in competition for visits by young married women - distance from the parents from one side has a parallel relationship to more frequent visits with the other set of parents. This is a much more equal footing for both sides of the family than attention to filial piety would predict. although the level of support from the young generation may keep declining.

• Korean Journal of Veterinary Research
• /
• v.50 no.3
• /
• pp.247-251
• /
• 2010

This study compared the instrument performance and tissue healing of a steel scalpel with a $CO_2$ laser in an animal urinary bladder surgery model. Landrace and Yorkshire mixed breed pigs were used. Two symmetrical incisions were made in urinary bladder of each pig. One incision was made on the left side of ventral aspect on urinary bladder using a steel scalpel, while the other incision was performed on the right side using a $CO_2$ laser with an 8W output power. Each instrument was evaluated clinically for speed, ease of incision, and extent of bleeding. At 7 and 21 days after initial wounding, each wound was taken for histological observations. The scalpel was an easier instrument to use in the confines of the urinary bladder tissue, compared with the laser. However, there was no significant difference between the two groups. The amount of bleeding was less in the laser group but the time of the incisions was shorter with the scalpel. Scalpel incisions showed complete restoration of the epithelium and muscularis. On the other hand, the laser incisions showed incomplete restoration of the epithelium and muscularis. However, most of wound healing in the laser incisions was accomplished according to the time lapse. Although the scalpel produced less damage to the urinary bladder tissue and was easier to handle than the $CO_2$ laser, it did not provide hemostasis that was helpful for use on highly vascular tissue. The $CO_2$ laser provided good hemostasis, but delayed wound healing. In conclusion, the $CO_2$ laser provided better hemostasis and better surgical field than the scalpel. The $CO_2$ laser was used effectively in urinary bladder incision.

• Korean journal of food and cookery science
• /
• v.23 no.3 s.99
• /
• pp.288-293
• /
• 2007

In this study, chunggukjang was made from soybeans and Bacillus natto. This chunggukjang was meant to be consumed as a margarine and butter substitute, to help lower trans-fatty acid (TFA) intake. A freeze-dried garlic product was used during fermentation to aid in removing the smell of the chunggukjang. Chunggukjang has a very low fluidity due to its high viscosity; therefore, we added 3%(w/w) soybean oil to improve the fluidity. We found that the TFA content of the garlic chunggukiang paste was no more than 0.02${\sim}$0.05%, which was low compared to the usual contents of margarine and butter. After 4 weeks of storage the TFA content was 0.03${\sim}$0.08%, and it remained within the limits of the permissible amount. The addition of soybean oil allowed this chunggukjang to be made with greater ease, and the freeze-dried garlic eliminated the negative inherent qualities of the chunggukjang. Therefore, this garlic chunggukjang paste could be considered reasonable for commercial production.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.86-93
• /
• 2010

The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• Journal of Welding and Joining
• /
• v.25 no.3
• /
• pp.18-27
• /
• 2007

Laser welding process is widely used in the industrial field due to its numerous advantages: a small heat affected zone(HAZ), deep penetration, high welding speed, ease of automation, single-pass thick section capability, enhanced design flexibility, and small distortion after welding. The objective of this research works is to investigate the influence of the process parameters, such as the welding fur metals with CW Nd:YAG lasers. The bead-on-plate and Lap welding experiments are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the welding quality of the cross section, tensile stress behavior and the hardness of the welded part are investigated in comparison of the Nickel coated and Nickel uncoated S45C steel. As a result of experiment, nickel coated S45C Steel showed more even weld zone than Nickel uncoated counterpart upon lap welding. Also, it showed relatively small amount of internal defects and spatter, and Nickel coated S45C showed better weldability than Nickel uncoated S45C steel. The optimum welding process upon lap welding of Nickel coated S45C steel is when each laser power is 1900W; focal positions is -1mm; welding speed is $0.9{\sim}1.0m/min$. The heat input was $4.178{\sim}4.36{\times}103J/cm^2$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1146-1157
• /
• 2005

As individual family has fewer children, market sectors targeting children's goods upgrade their products quality and price. Children's wear used to be for casual activity or going to school. Recently, occasions in which children are dressed up are getting increase, such as wedding, concert or family gathering. Therefore, the industry sector of formal wears for school boys are growing. The purpose of this study is to research and grading of formal wears for school boys to improve their fit and comfort. The selected items as formal wear were tailored jacket, tuxedo, tail coat and pants. Based on the grading increments of the industry, grading was done far 7 years and 11 years old school boy for each item. Like the pattern alteration, grading increments were tested and altered through wearing tests. The final increments were suggested as the 'researched grading increments'. The results and conclusions are: 1. Appropriate size allowance, ease amount and lengths for boys are different from those far adults. The difference should be applied for boy's wear. 2. Grading increments for an age group are different from other age group. For example increments of 7 from 9 are different from that of 11 from 9. It is because a certain part grows faster during a certain age whereas other part grows faster during different period. Therefore grading for children should reflect their growth rather than same size increments which is common in adult size chart.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.303-312
• /
• 2007

Recently several studies have been developed not only to apply bone materials to bony defect, but also to use osteogenic and osteoinductive materials to form bone more effectively. In 1998 Mark et al applied gel formation of PRP(platelet-rich plasma) in bony transplantation for mandibular reconstruction as one of the method of stimulating bone formation in maxillofacial area, which is contain of varies growth factors. After he reported that PRP accelerate bone formation, which is used in varies bone transplantation and augmentation with a good result. Especially there are amount of growth factors in PRP, and PRP increase angiogenesis, cell division, and mesenchymal cell growth. Moreover it is capable of osteoconduction, hemostatitis, anti-infection, forming the shape at transplantation, ease of handling, and recipient site stability. So it is known that success rate is high in bone transplantation. However PRP need tissue adhesive to make plasma to solid form. Thrombin and calcium chloride, component of PRP, is extracted from autogenic donor. So it is expensive to extract and there is possibility of hepatitis, AIDS, and hematogenous metastasis. After all, tissue adhesive have the limitation and danger of use. So we are willing to introduce that we had get some idea after using PRF(platelet-rich fibrin) in the various hard and soft tissue bony defect, which is self extracted simply and contain growth factors.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.3
• /
• pp.177-183
• /
• 2004

Recently, studies on intranasal mucosa delivery of influenza vaccine have been actively developed because of lack of pain and ease of administration. We studied on preparation of nanoparticle delivery system using biodegradable polymer as a poly(DL-lactide-co-glycolide) (PLGA) and their binding characteristics with vaccine. Three kinds of PLGA nanoparticles were prepared by spontaneous emulsification solvent diffusion (SESD) method using sodium dodecyl sulfate and sodium laurate as an anionic surfactant and Lutrol F68 (polyethylene glycol-block-polypropylene glycol copolymer) as a nonionic surfactant. The 5-aminofluorescein labeled vaccine was coated on the surface of nanoparticles by ionic complex. The complexes between vaccine and nanoparticles were confirmed by change of the size. After vaccine coating on the surface of anionic nanoparticles, particle size was increased from 174 to 1,040 nm. However the size of nonionic nanoparticles was not more increased than size of anionic nanoparticles. The amount of coated vaccine on the surface of PLGA nanoparticles was $14.32\;{\mu}g/mg$ with sodium dodecyl sulfate, $12.41\;{\mu}g/mg$ with sodium laurate, and $9.47{\mu}g/mg$ with Lutrol F68, respectively. In conclusion, prepared nanoparticles in this study is possible to use as a virus-like nanoparticles and it could be accept in the field of influenza vaccine delivery system.

• Journal of the Korean Society for information Management
• /
• v.20 no.2
• /
• pp.93-112
• /
• 2003

A public information system is being expanded, along with the advance of information technology, to strengthen national competitiveness and provide people with better services. And there also is a growin need for the better performance of that system, as a tremendous amount of public financial resources is invested in that. To address that need, it's required to make an evaluation of its efficiency on a regular basis to identify its problems and make it work better. The purpose of this study was, accordinglu, to examine the quality of data and services provided by the Work-Net, a Web-based public employment information system. The subjects in this study were 102 users of it, and the system was evaluated in terms of content, accuracy, timeliness, display format, ease of use and customer support. For data analysis, t-test and one-way ANOVA were implemented to find out the general characteristics of the users, and to see Whether or not their view was different according to the type of information they searched for. The findings of this study are expected to lay some foundation for intensifying the efficiency of the public and private employment information systems.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.387-403
• /
• 2006

The purpose of this study was to develop a new torso pattern for the schoolgirl of a tween generation who had different somatotype from children and teenagers. The subjects in this study were female elementary school students of fifth or sixth grade. Through a sensory evaluation of four existing torso patterns, the first research torso pattern was developed. Drafting methods of each item, which closed to the optimum value three, were selected. The differences between the values of the selected drafting methods and the optimum three were verified through a Wilcoxon's ranked sum test. The final research torso pattern was developed through adjusting the drafting methods according to the deviation from the optimum value three. The schoolgirl of a tween generation is at the time to show the remarkable breast development compared with a waist circumference, so the bust drafting was defined as B/4+ 1.25cm separately front and back. The drafting of a waist circumference was defined as W/4+1cm separately front and back which taken the ease amounts of the somatotype into consideration of the schoolgirl of a tween generation. A princess line was used instead of a waist dart because their hip circumference was more developed than a waist circumference. The crossed amount of a front hemline was 0.3cm and that of a back hemline was 0.7cm. and the princess line of the position was drawn with a straight line at a right angle of the back waistline. The armhole depth was determined B/4-1cm in consideration of the aesthetic and the trend, although the effective movement of upper arm was required.