• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.741-744
• /
• 2003

In this study, the influence of chemical admixture on early strength development of concrete is discussed. According to the results, fluidity with variation of kinds of chemical admixture is lower in the case of acceleration type than in the case of normal type. Setting time of naphthalene acceleration type is shortened by I hour, and that of melamine is nearly same, but that of polycarbonic acid is somewhat retarded in comparison with that of naphthalene normal type. Early compressive strength gains 5MPa in about 18hours regardless of the kinds of chemical admixture. But as time elapses, compressive strength is higher in order of polycarbonic acid, naphthalene and melamine type. The relativity between compressive strength and the rebound value of P-type schmidt hammer is also favorable at early age, and compressive strength of 5MPa is estimated at the rebound value of 22.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.269-272
• /
• 2003

This study is intended to investigate the properties of concrete using AE Water Reducing Agent of Early-Strength Type. According to the results, as for the replacing method of mineral admixture, setting time is shortened faster in order of replacement for fine aggregate, combination and replacement for cement, and when AE Water Reducing Agent of Early-Strength Type is used, it is shortened by about 4 hours, compared with normal AE Water Reducing Agent Compressive strength is lower in the case of replacement for fine aggregate, but higher in the other case than that of plain concrete. And When AE Water Reducing Agent of Early-Strength Type is used, early compressive strength is very high in comparison to normal AE Water Reducing Agent. Early strength development is very favorable by the use of AE Water Reducing Agent of Early-Strength Type regardless of the replacing method of mineral admixture at $20^{\circ}C$, but at $l0^{\circ}C$, it is effective for Early strength development that W/B is lowered to below 45%, BS of 20% is replaced for fine aggregate, and AE Water Reducing Agent of Early-Strength Type is used.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.361-364
• /
• 2005

This study reports the properties of high early strength of concrete using PC admixture. To apply these data to construction site, we did the lab tests and mock-up test. The target of this study is to accomplish early strength of concrete(5 MPa/18 hr), and we tested by the different factors, such as the type of admixtures, curing temperature, the amount of binder, etc. Through the test of concrete using the different type of admixture, PC type was more excellent than PNS type admixture. According to these tests, we concluded that we can apply this type of PC Admixture to the civil & construction site, and we can reduce the term of works and finally we can accomplish the economical construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.467-470
• /
• 2005

This study reports the properties of high early strength & durability of concrete using PC admixture. To apply these data to construction site, we did the lab tests. The target of this study is to accomplish early strength of concrete(5.0 MPa/18 hr), and we did the durability tests such as length change test, chloride ion penetration test, adiabatic test, etc. PC type was more excellent than PNS type admixture. According to these tests, we concluded that we can apply this type of PC admixture to the civil & construction site, and we can reduce the term of works and finally we can accomplish the economical construction.

• 한국도로학회논문집
• /
• 제19권3호
• /
• pp.1-10
• /
• 2017

PURPOSES : This paper focuses on strength development according to the mix design with cement type and mineral admixture from laboratory and field tests in cool weather. METHODS : Two methods evaluated the mix design of concrete pavement in cool weather. Firstly, laboratory tests including slump, air contents, setting time, strength, maturity, and freezing-thawing test were conducted. Three alternatives were selected based on the tests. Secondly, a field test was conducted and the optimum mix design in cool weather was suggested. RESULTS : It is an evident from the laboratory test that a mix with type III cement showed better performance than the one with type I cement. There was a delay in strength development of a mix with mineral admixture compared to mix design without any mineral admixture. In the field test, type III cement+flyash 20% mix design proved the best performance. CONCLUSIONS : For concrete pavement in cool weather, mix design using type III cement could overcome the strength delay due to mineral admixture. Moreover, it is possible to make sure of durability of pavement. Therefore, strength and durability problems due to cool weather would decrease.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.48-49
• /
• 2013

This test investigates early strength and durability of concrete using early strength type materials(cement, Polycarboxylate acid). The goal of this test is to secure the strength of 5.0 MPa in 12 hours early age and strength of 14 MPa for 24 hours correspondingly. This type of admixtures, concrete curing temperature, amount of binder and other concrete properties were confirmed by experimental factors. Comparing outcomes from two cases on using early strength type materials and common materials resulted in reducing of costs and shortening of the construction period, that determined the economical benefits of using early strength materials in construction.

• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.217-224
• /
• 2007

이 연구는 PC계 조강혼화제를 사용한 콘크리트의 조기강도 및 내구 특성에 대한 내용이다. 이들 데이터를 건설현장에 적용하기 위하여 실내 시험을 실시하였다. 이 연구의 목표는 조기강도 즉 재령 18시간에 5.0 MPa의 강도를 확보하기 위하여 진행되었다. 그리고, 건조수축 길이 변화 시험, 염소이온 침투 저항성 시험, 동결융해 저항성 시험, 단열온도 상승 시험 등과 같은 내구성 시험을 실시하였다. 연구를 실시함에 있어 각각의 시험 인자들 즉, 혼화제의 종류, 콘크리트의 양생온도, 결합재의 사용량 등의 시험 인자들을 변수로 하여 각각의 콘크리트의 물성을 확인하였다. 혼화제 종류에 따른 콘크리트의 시험 결과 PC계 혼화제를 사용했을 때 PNS를 사용했을 때보다 훨씬 뛰어난 성능을 발휘한다는 사실을 확인할 수 있었다. 결론적으로 이 연구를 통하여 조기강도를 확보하고, 고 내구성을 확보한 콘크리트를 제조할 수 있었다. 이들 시험을 통하여, 토목 및 건축 현장에서 PC계 조강혼화제를 사용할 수가 있고, 조기강도를 앞당김으로써 공사 기간 단축에 의한 공사 원가 절감으로 경제적인 시공이 가능하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.25-28
• /
• 2005

This study shows the early quality improvement of concrete with calcium sulfa aluminate(CSA). For the properties of slump, plain concrete incorporating BS $35\%$ and UP $15\%$ resulted in high fluidity compared with OPC without any admixture. As displacement ratio of CSA increased. the fluidity decreased. The fluidity also declined with setting time. Increase of incorporation ratio of CSA declined bleeding and accelerated setting time. Importantly, using more CSA helped to improve early compressive strength and decrease drying shrinkage. In term of water curing, drying shrinkage hardly ever occurred.

• 한국농공학회지
• /
• 제13권4호
• /
• pp.2419-2425
• /
• 1971

한중(寒中)콘크리트 시공(施工)에 염화(鹽化)칼슘사용(使用)은 콘크리트의 초기강도(初期强度)를 최대한(最大限)으로 높여 동해(凍害)를 방지(防止)함과 경제적(經濟的인 구조물(構造物)을 만들고자 하는데 목적(目的)이 있으며 시험결과(試驗結果)로서 그의 범위(範圍)를 요약(要約)하면 다음과 같다. 1. 염화(鹽化)칼슘을 시멘트중량비(重量比) 1.5%를 TYPE I TYPE II에 혼합(混合)하면 초기강도(初期强度)를 최대한(最大限)으로 증진(增進)할 수 있고 구조물(構造物)의 안전(安全)을 위(爲)해서 1.5%내외(內外)가 적합(適合)하겠다. 2. 염화(鹽化)칼슘을 혼합(混合)하여 동결(凍結)의 위험(危險)을 방지(防止)하기 위한 콘크리트를 만들자면 w/c비(比)를 50% 내외(內外)로 정(定)해야 만이 한중(寒中)에 안전(安全)하겠다. 3. 포조란 초기강도(初期强度)는 떨어지나 후기강도(後期强度)가 점차(漸次)로 상승(上昇)한다. 4. 콘크리트의 초기강도(初期强度)의 증진(增進)으로 양생기간(養生期間)을 최대한(最大限)으로 단축(短縮)시킬 수 있으므로 콘크리트 구조물(構造物)의 끝손질을 조기(早期)에 실시(實施)해야 한다. 염화(鹽化)칼슘의 혼입(混入)은 시멘트응결(凝結)을 촉진(促進)시킬 수 있어 한중(寒中)에 있어서 동해(凍害)를 방지(防止)하고 공기(工期)를 최대한(最大限)으로 단축(短縮)시킬 목적(目的)으로 공사시공(工事施工) 현장(現場)에서는 유효히 사용(使用)될것으로 사료(思料)된다.

• 한국건축시공학회지
• /
• 제14권4호
• /
• pp.322-328
• /
• 2014

본 연구에서는 콘크리트의 조기강도 확보를 통해 골조공기를 단축하는 것을 목표로 하여 시멘트 종류, 고성능감수제의 감수율, 초기수화 촉진 혼화제의 혼입에 따른 콘크리트의 조기강도 발현성능을 검토하였다. 조기강도 개선형 시멘트와 Sodium persulfate, Potassium hydroxide의 초기수화 촉진물질에 의해 12시간에 5MPa, 18시간에 14MPa의 조기강도를 확보할 수 있는 것으로 나타났다. 이를 통해 건설현장에서 거푸집의 골조공기를 단축시켜 원가절감이 가능할 것으로 기대된다.