• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.193-197
• /
• 2002

Polyurethane casting wing fairings included in F-5E/F 15% spar kit are to be installed on aircraft wing surfaces and used for compensating the changes of the aerodynamic configuration by the leading edge extension fairings. These fairing are mandatory items in repairing wing areas and was imported from foreign supplier with long term delivery and high cost. Accordingly, local manufacturing is necessary to get rid of above disadvantages such as long term delivery and high cost. Basic properties test of specimen to be developed and part's requirements after localization was taken and its values were similar or higher when comparing with the original's even in low temp test at -55C. Casting mold process was used to manufacture the polyurethane fairings and its demensional stability ＆ physical condition was proper and met to the related specification and drawing's requirements

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.30-35
• /
• 2003

In this study, sand cast AZ91E and zirconium grain refined MEZ are representative of two typical groups of magnesium alloys: those containing aluminium and those containing no aluminium but with zirconium as a grain refiner. The corrosion performance of these two alloys was evaluated and compared in 5%wt NaCI solution through measurements of weight loss and polarisation curves and examination of microstructure. Corrosion damage of AZ91E was deeper and more localised than that of MEZ, while MEZ had a lower rate of cathodic hydrogen evolution and a higher rate of anodic dissolution than AZ91E. These differences in behaviour can be related to the differences in microstructure and chemical composition between the two alloys.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.33-38
• /
• 2009

• The Journal of Society for e-Business Studies
• /
• v.5 no.2
• /
• pp.81-99
• /
• 2000

Nowadays, many commercial ERP products, such as Oracle, SAP, and Baan, etc, are designed based on large-scaled companies. It is difficult for small and medium-size companies with weakness in budgets and resources(e.g., human, organization, technique, and so on) to use them as it was. So, new ERP system need to be provided for small and medium-size companies. In this paper, we model and provide a conceptual ERP model for small and medium-size companies by using "4＋1 View" architecture model of Unified Modeling Language(UML). The conceptual ERP model consists of five subsystems： Manufacturing, Sales, HumanResource and Payroll, Accounting, and Trading. Especially, we describe the conceptual ERP model focusing on "Manufacturing" subsystem by using several diagrams of UML. By using the conceptual ERP model, the ERP system′s developers of small and medium-size companies can obtain many benefits： improving the efficiency of software developing process and helping user requirements gathering and description of ERP system′s nonfunctional aspect as well as functional aspect.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.2
• /
• pp.80-86
• /
• 2001

Information technology has been used many areas not only computer communications but also manufacturing managements. This paper is about the parts code and utility of 3d image maker that is needed in parts management of manufacturing system. This images can be viewed by internet network, that makes it possible to teach and train new workers. Other application area would be e-commerce, cyber show and e-trade.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.689-691
• /
• 1993

This paper describes an induction heating system which is developed for CRT manufacturing. This system consists of a buck chewer, a voltage source full-bridge inverter, and a series resonant circuit with a matching transformer. A series resonant scheme is employed, and operated at the zero phase of the resonant load by PLL. This ensures maximum power transfer, good efficiency and reliability of the system. Implementation of a prototype rated of 3 kW 450 kHz is described and experimental results are given.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.83-86
• /
• 2009

BiNem$^{(R)}$ displays have entered volume manufacturing in 2009. Applications range from e-labels to e-readers. We have developed 6-inch $960{\times}720$ pixels passive matrix BiNem prototypes achieving 40 % brightness and fluid user interface based on partial image / dynamic pointer addressing. Active-matrix addressing is proposed to provide even faster operation.

• IE interfaces
• /
• v.25 no.1
• /
• pp.87-95
• /
• 2012

Very special and tentative considerations including emotional aspects are required to apply any new mechanism and methodologies for manufacturing fields due to several reasons. This study reviews the characteristics of manufacturing collaborations through specific cases applied digital engineering to enhance the collaboration performance in manufacturing domains. Two cases of collaboration related with automotive manufacturing process are analyzed to extract meaningful insights for better collaboration model suggestions. The first case deals the robot simulation to find out advance errors in jig and fixture design during the various welding process of body-in-whites. The effective communication protocol to share their idea and agreed schedules are essential for this collaboration. More severe requirement of collaboration between R&D and manufacturing departments are studied in the second case for e-coating process. The invisible barriers among different departments are lowered by the process application of Computer Aided Engineering which can make sure their own interesting effectively. Those technical and managerial suggestions can be used when the information system and standard process are sought to implement and update not only when innovation projects are executed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.460-463
• /
• 2005

Gear is an important machine element to be used transmission in case short between axis. We drew gear using automatic design program to solve problem when it draw gear. We manufactured gears that it have different pressure angles using W-EDM. And we got a 2D profile of manufactured gear using reverse engineering. So we got to manufacturing error in comparison with CAD data and measured data. In result we could manufacture precise gear through improvement of manufacturing processes.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.05a
• /
• pp.299-304
• /
• 2003

Manufacturing companies must possess a new type of production system with characteristics of reconfigurability, reusability and scalability (Dove 1995), i.e. an agile manufacturing system. Such system will allow flexibility not only in producing a variety of part, but also in changing the system itself, which is a difference form flexible manufacturing systems. A fundamental early step in the reconfiguring process for agile manufacturing system is to develop a model that adequately describes the proposed systems, in order to be able to study and evaluate the impact of the reconfiguring decision on the system performance, before its construction. Therefore, in this paper, an Object & Knowledge-based Interval Timed Petri-Net (OKITPN) approach is proposed.