• 제어로봇시스템학회논문지
• /
• 제13권6호
• /
• pp.589-595
• /
• 2007

This paper presents a new method on controller design of brushless dc motors. In such drives the current ripples are generated by motor inductance in stator windings and the back EMF. To suppress the current ripples the current controller is generally used. To minimize the size and the cost of the drives it is desirable to control motors without the current controller and the current sensing circuits. To estimate the motor CUlTent it is modeled by a neural network that is contigured as an output-error dynamic system. The identified model is essentially a one step ahead prediction structure in which past inputs and outputs are used to calculate the current output. Using the model, a state feedback controller to compensate the effects of disturbance has been designed. The controller is implemented by a 16-bit microprocessor and the effectiveness of the proposed control method is verified through experiments.

• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.162-170
• /
• 2003

In this paper, we propose a robust controller for trajectory control of n-link robot manipulators using feature based on visual feedback. In order to reduce tracking error of the robot manipulator due to parametric uncertainties, integral action is included in the dynamic control part of the inner control loop. The desired trajectory for tracking is generated from feature extraction by the camera mounted on the end effector. The stability of the robust state feedback control system is shown by the Lyapunov method. Simulation and experimental results on a 5-link robot manipulator with two degree of freedom show that the proposed method has good tracking performance.

• 전자공학회논문지B
• /
• 제32B권7호
• /
• pp.943-951
• /
• 1995

In this paper the projective controls, previously derived to preserve the dynamic modes of a state-feedback reference system, are extended to allow the preservation of the modes of a general output-feedback reference system. In general, the extension allows projective controls to be used as a controller approximation technique, where a reduced-order controller is designed to approximate the closed-loop behavior of the higher-order reference controller. This extension is useful if the best available reference control for the system is an output-feedback control. An example shows that the increased design freedom of proposed design method allows the stabilization of a given plant using a lower-order controller than the projective controls with state-feedback reference.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1269-1289
• /
• 2014

With the sub-stepping technique, the numerical analysis in real-time dynamic hybrid testing is split into the response analysis and signal generation tasks. Two target computers that operate in real-time may be assigned to implement these two tasks, respectively, for fully extending the simulation scale of the numerical substructure. In this case, the integration time-step of solving the dynamic response of the numerical substructure can be dozens of times bigger than the sampling time-step of the controller. The time delay between the real and desired feedback forces becomes more striking, which challenges the well-developed delay compensation methods in real-time dynamic hybrid testing. This paper focuses on displacement prediction and force correction for delay compensation in the real-time dynamic hybrid testing with a large integration time-step. A new displacement prediction scheme is proposed based on recently-developed explicit integration algorithms and compared with several commonly-used prediction procedures. The evaluation of its prediction accuracy is carried out theoretically, numerically and experimentally. Results indicate that the accuracy and effectiveness of the proposed prediction method are of significance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권1호
• /
• pp.37-43
• /
• 1996

This paper presents a new control scheme for decoupling the dynamics of two coordinating robot manipulators. A simple full-state feedback scheme with configuration dependent gains can be devised to decouple the system dynamics such that the dynamics of each arm and that of an object held by the two arms is independent of one another. A condition for stability is shown. The advantage of the proposed scheme is that the same control scheme can be applied both for the closed kinematic chain(object-grasping) case and open kinematic chain(no object-grasping) case.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1078-1081
• /
• 1993

The Objective of this paper is to provide fuzzy control designers with a design tool for stable fuzzy logic controllers. Given multiple sets of data disturbed by vagueness uncertainty, we generate the implicative rules that guarantee stability and robustness of closed-loop fuzzy dynamic systems. We propose the cell-state transition method which utilizes Hsu's cell-to-cell mapping concept [1]. As a result, a generic and implementable design methodology for obtaining a fuzzy feedback gain K, a fuzzy hypercube [2], is provided and illustrated with simple examples.

• 전자공학회논문지SC
• /
• 제46권4호
• /
• pp.1-6
• /
• 2009

본 논문에서 우리는 비선형 시스템에 대한 다이나믹 스무스 상태 궤환 안정화기를 설계한다. 이 시스템은 우반평면에 고유값이 존재함으로 제어불가능 모드를 가질 수 있다. 이 시스템을 지수적으로 안정화하기 위해서 우리는 추가 다이나믹스를 고려한 다이나믹 제어기를 제안한다. 추가 다이나믹스의 설계 후에 다이나믹 차수 보정법과 역진기법을 이용하여 안정화기와 미분 가능, positive definite, proper인 리아푸노프 함수를 설계한다. 설계된 제어기의 수렴성은 차수 지표자라는 새로운 개념의 도입으로 증명될 것이다.

• 전기전자학회논문지
• /
• 제9권1호
• /
• pp.72-78
• /
• 2005

본 논문은 단일입력 단일출력 비선형 계통에 대해서 강인한 출력궤환 제어기를 제시한다. 이전의 출력궤환 비선형 제어기가 모두 동적인 관측기 기반으로 설계된 반면 본 논문에서는 출력의 과거값들만을 이용하여 상태변수를 추정하는 새로운 방식을 제안하고 이를 후방차분 상태추정기라 명했다. 실제 상태변수값과 추정치와의 오차를 보상하기 위해서 제어입력에 강인제어항을 추가하였고 그것의 이득을 자동으로 조정하는 적응 알고리듬을 채택했다. 전체 폐루프 시스템은 출력 추종 오차가 점근적으로 안정하도록 그리고 모든 신호가 유계이도록 제어입력과 적응법칙이 설계된다. 제시된 제어기를 역진자 계통에 적용한 모의실험을 통해서 성능을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.82-85
• /
• 1987

The objective of this paper is to develop computer programs to aid in the design and analysis of control systems in which nonlinear characteristics exist. Control systems are dynamic systems, which can be described using various mathematical models. A convenient model for digital computer simulation is the state model in which described using a set of linear and non linear first order differential equations. The digital simulation was performed on a IBM PC/XT personal computer, and the computer language was BASIC. There are four possible configurations from which a user may choose. When running a program, the user is asked to enter the system parameters according to a specified control system configurations are; 1. A control system with a nonlinear element followed by a plant in a feedback configurations(NLSVF1). 2. A control system with a nonlinear device situated between two plants in a feedback configurations(NLSVF2). 3. A control system with a nonlinear element followed by a plant, followed by a the dealy in feedback configurations(TLAG). 4. A motor and load with a backlash nonlinearity between dynamic portions of the motor/load configurations (BACKLASH). The matrix from state equations are integrated using combination the trapezoidal method and fixed point iteration. Several cases which have nonlinearity were implemented on the computer and the results were discussed.

• Nuclear Engineering and Technology
• /
• 제21권2호
• /
• pp.99-110
• /
• 1989

원자로 지논 농도의 최적 제어는 Linear Quadratic Regulator Problem이다. 지논 농도와 아이오다인 농도는 측정할 수 없기 때문에 최적 제어를 수행하기 위해서는 측정할 수 없는 상태 변수를 예측하는 것이 필요하다. 본 연구에서 사용된 예측방법은 Luenberger Observer를 기초로 했다. 원자로 상태 방정식은 빠른 상태 방정식(중성자 속, 핵연료 및 냉각재 온도)과 느린 상태 방정식(아이오다인, 지논)의 상호작용에 의해 Stiffness 문제가 발생되는데 이러한 시스템을 "Singularly Perturbed System"이라 한다. Stiffness문제를 해결하기 위해서 원 시스템을 느린 시스템과 빠른 시스템의 두 개의 모드로 나누는 Singular Perturbation Method를 사용한다. 예측기Observer를 이용한 원 시스템의 제어기는 느린 시스템과 빠른 시스템에 대한 분리된 예측기와 제어기의 설계에 의해 결정되어진다. 특히 원자로 상태 방정식에서는 빠른 모드는 빨리 사라지게 되므로 단지 느린 시스템에 대해서만 예측기를 설계하면 된다. 컴퓨터시뮬레이션을 통한 시험 결과는 원자로의 지논 진동은 Singular Perturbation Method와 예측기를 이용해서 거의 정확하게 효과적으로 짧은 시간내에 제어할 수 있음을 알았다.수 있음을 알았다.