• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.10
• /
• pp.24-33
• /
• 2001

Delay, delay variation and packet loss rate are principal QoS(Quality of Service) elements of packet communication. This paper proposes a new buffer allocation mechanism to improve the packet loss performance in such a situation that multiple logical buffers share a single physical memory buffer. In the proposed buffer allocation mechanism, the movement of dynamic threshold follows a curved track instead of a straight line which is used in the DT(dynamic threshold) mechanism. In order evaluate the effectiveness of the proposed mechanism, it is compared with the existing previously proposed mechanisms in several aspects including NC(no control), ST(Static Threshold) and DT mechanisms.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.677-684
• /
• 2003

Most policies of VOD services are mainly studied about server system, and make no touch on clients buffer stabilization which is the basis of guaranteeing playback quality and playing without cut off. In this paper, we proposed a skipping frame transfer policy that can sending dynamic buffer control signal to server in accordance with clients buffer state of starvation or overrun, and server transfers a skipped frame to client after receive the control signal. And through a simulation, we show the suggested policy is more efficiency on playback quality by buffer stabilization which is by preventing loss and miss for receiving frame due to grow worse client buffer state.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.469-475
• /
• 1991

In this paper, we suggest the exact perturbation analysis(Exact_PA) technique with respect to the buffer storage in tandem queueing networks, through which the optimal buffer storage design problem is considered. The discrete event dynamic equations for the departure time of a customer are presented together with the basic properties of Full Out(FO) and No Input(NI) with respect to the buffer storage. The new perturbation rules with respect to the buffer storage are suggested, from which the exact perturbed path can be obtained. The optimal buffer storage problem is presented by introducing a performance measure consisting of the throughput and the buffer storage cost. An optimization algorithm maximizing this performance measure is derived by using the Exact_PA technique. The proposed perturbation analysis technique and the optimization algorithm are validated by numerical examples.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.214-222
• /
• 2008

Bode principle is applied to carry out traffic control for rate based ATM network, which guarantees the higher buffer utilization, buffer overflow-free, and well utilization of bandwidth. The principle confirms the relationship between the threshold of buffer queue and the network bandwidth, as well as the relationship between the threshold of buffer and source input rate. Theoretic warrant of the buffer threshold is proposed. The reference range of source input rate is provided in theory, which makes the source end respond to the change of network state rapidly and dynamically, and then the effect of time delay to the traffic control is avoided. Simulation results show that the better steady and dynamic performances of networks are obtained by Bode principle.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.103-118
• /
• 1995

This paper is concerned with developing flow control method for a dynamic multistage manufacturing system with interstage buffers and unreliable machines. For the effective control of proposed manufacturing system, the three-level hierarchical scheme is introduced. At the top level, we collect the system data and then, design the buffer sizes and hedging points. Short-term production rates are calculated at the middle level. At the bottom level, actual dispatching times are determined by Clear the Largest Buffer Level rule. The control method utilizes the material and the space in the buffers to alleviate the propagation of a failure to other machines in the system and keeps the production close to demand. Finally, a numerical example is provided to illustrate the mathematical control method developed and implemented in a dynamic manufacturing environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.855-869
• /
• 1997

In this paper, we proposed two kids of dynamic priority control mechanisms controlling the cell service ratio in order to improve the QOS(Quality of Service). We also analyse theoretically the characteristics of cell loss probability and mean cell delay time by applying the proposed priority control mechanisms to ATM switch with output buffer. The proposed priority control mechanisms have the same principles of storing cells into buffer but the different principles of serving cells from buffer. The one is the control mechanism controlling the cell service ratio according to the relative cell occupancy ratio of buffer, the other is the control mechanism controlling the cell service ratio according to both the relative cell occupancy ratio of buffer and the average arrival rate. The two service classes of our concern are the delay sensitive class and the loss sensitive class. The analytical results show that the proposed control mechanisms are able to improve the QOS, the characteristics of cell loss probability and mean cell delay time, by selecting properly the relative cell occupancy ratio of buffer and the average arrival rate. conventional DLB algorithm does not support synchronous cells, but the proposed algorithm gives higher priority to synchronous cells. To reduce synchronous cell loss rate, the synchronous cell detector is used in the proposed algorithm. Synchronous cell detector detects synchronous cells, and passes them cells to the 2nd Leaky-Bucket. So it is similar to give higher priority to synchronous cells. In this paper, the proposed algorithm used audio/video traffic modeled by On/Off and Two-state MMPP, and simulated by SLAM II package. As simulation results, the proposed algorithm gets lower synchronous cell loss rate than the conventional DLB algorithms. The improved DLB algorithm for multimedia synchronization can be extended to any other cells which require higher priority.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.768-783
• /
• 2020

Typically, a Dynamic Positioning System (DPS) uses a PID feed-back system, and it often adopts a wind feed-forward system because of its easier implementation than a feed-forward system based on current or wave. But, because a ship's drifting motion is caused by wind, current, and wave drift loads, all three environmental loads should be considered. In this study, a motion predictive control for the PID feedback system of the DPS is proposed, which considers the three environmental loads by utilizing predicted drifted ship positions in the future since it contains information about the three environmental loads from the moment to the future. The prediction accuracy for the future drifted ship position is ensured by adopting deep learning algorithms and a replay buffer. Finally, it is shown that the proposed motion predictive system results in better station-keeping performance than the wind feed-forward system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5271-5289
• /
• 2016

On large-scale data analysis platforms deployed on cloud infrastructures over the Internet, the instability of the data transfer time and the dynamics of the processing rate require a more sophisticated data distribution scheme which maximizes parallel efficiency by achieving the balanced load among participated computing elements and by eliminating the idle time of each computing element. In particular, under the constraints that have the real-time and limited data buffer (in-memory storage) are given, it needs more controllable mechanism to prevent both the overflow and the underflow of the finite buffer. In this paper, we propose an auto regulated data provisioning model based on receiver-driven data pull model. On this model, we provide a synchronized data replenishment mechanism that implicitly avoids the data buffer overflow as well as explicitly regulates the data buffer underflow by adequately adjusting the buffer resilience. To estimate the optimal size of buffer resilience, we exploits an adaptive buffer resilience control scheme that minimizes both data buffer space and idle time of the processing elements based on directly measured sample path analysis. The simulation results show that the proposed scheme provides allowable approximation compared to the numerical results. Also, it is suitably efficient to apply for such a dynamic environment that cannot postulate the stochastic characteristic for the data transfer time, the data processing rate, or even an environment where the fluctuation of the both is presented.

• Journal of KIISE
• /
• v.43 no.3
• /
• pp.327-335
• /
• 2016

In this paper, we propose a buffer management scheme suitable for interactive multimedia services. We consider a typical delay optimization environment so that receiver buffer lengths vary according to the round trip time estimation. In this environment, we propose an optimization technique for minimizing the loss of information that may occur when a reduced buffer length forces I/P/B frames in the buffer to drop. We modeled our problem as a Knapsack Problem for which we used dynamic programing in order to find an approximate solution. The proposed technique is compared with the existing buffer management techniques. Through simulation studies, we found that our approach could increase PSNR, which is important to video quality.

• Communications of the Korean Mathematical Society
• /
• v.13 no.3
• /
• pp.603-627
• /
• 1998

The leaky bucket scheme is a promising method that regulates input traffics for preventive congestion control. In the ATM network, the input traffics are bursty and transmitted at high-speed. In order to get the low loss probability for bursty input traffics, it is known that the leaky bucket scheme with static leaky rate requires larger data buffer and token pool size. This causes the increase of the mean waiting time for an input traffic to pass the policing function, which would be inappropriate for real time traffics such as voice and video. We present the leaky bucket scheme with dynamic leaky rate in which the token generation period changes according to buffer occupancy. In the leaky bucket scheme with dynamic leaky rate, the cell loss probability and the mean waiting time are reduced in comparison with the leaky bucket scheme with static leaky rate. We analyze the performance of the proposed leaky bucket scheme in discrete-time case by assuming arrival process to be Markov-modulated Bernoulli process (MMBP).