• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.6
• /
• pp.510-516
• /
• 2007

The proposed method offers an improved control method for high power density AC/DC adapter by using more energy efficient electrical equipments. Power factor correction (PFC) topology is based on boost topology with boundary conduction mode (BCM). DC/DC topology is based on half-bridge topology with fixed 50% duty and newly introduced off-time control method, which helps to reduce size of the semiconductor and the magnetic devices. Test results with 85W AC/DC adapter (18.5V/4.6A) design show that the measured efficiency is 90% with power density of $36W/in^3$. It also shows low no load power consumption of about 0.5W.

• Culinary science and hospitality research
• /
• v.10 no.3
• /
• pp.32-50
• /
• 2004

The purpose of this study was to examine what caused bakery employees at tourist hotel to leave their job. It's basically meant to lay the foundation for increasing personnel management efficiency and reducing turnover rate, as an attempt to prevent workers from quiting their jobs would be a successful way to take advantage of human resources more efficiently. Both theoretical and experimental approaches were utilized to serve the purpose of this study. First, concerning salaries, their turnover intention was under the influence of whether they were properly paid or gained a sufficient living. Second, as for environmental factors, their turnover intention was affected by performance appraisal and interpersonal trust with colleagues. Third, regarding job-related factors, their turnover intention was impacted by whether their job was clearly defined, how much they were satisfied with their job and whether their posts were suitable. Forth, the change of job was subjected to the influence of the desire for job in another region, job in another company and another kind of job. And there should be a clear distinction between sales and other works, and they should carefully be treated so that they could find their job more satisfactory.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.5
• /
• pp.405-412
• /
• 2002

Since the switching device of current-fed bridge-type topology suffers from him-off voltage spikes associated with larger energy than that of voltage-fed topology, a high-efficiency non-dissipative snubber is considered essential. However, the complicated operation and the capricious performance according to various conditions make the design of the non-dissipative difficult. In this paper, the non-dissipative snubber employed in the current-fed half-bridge converter operating at a duty ratio above 0.5 is completely analyzed and the design considerations are discussed. Some design examples and the experimental results are provided to confirm the analysis and design presented in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.884-891
• /
• 2006

A wireless sensor node is typically battery operated and energy constrained. Therefore it is critical to design efficient power management technique and scheduling technique. In this paper, we propose an OS-level power management technique for energy saving of wireless sensor node, it is called EA-SENTAS (Energy-Aware Sensor Node TAsk Scheduling). It can decrease the energy consumption of a wireless sensor node to use task scheduling technique that shut down components or use low power mode of each component when not needed. Simulation results show that EA-SENTAS saves energy up to 56 percent to compare with conventional duty cycle.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.3
• /
• pp.383-391
• /
• 2006

In Korea, the major source of serious air pollution is motor vehicles. Air pollution from vehicles has been annually increased. Then the government will try to control the vehicle emission by applying the effective emission management policy for the manufactured and in-used car. It is necessary to correctly calculate the emission factor for successful propulsion of the vehicle emission control policy. In this study, correlation analysis of exhaust emissions from vehicles between CVS-75 mode and Korea mode was conducted. A total of 25 light-duty buses were tested on the chassis dynamometer system in order to measure CO, HC, NOx PM and fuel efficiency (F.E.). For the test modes, 10 different Korea modes and CVS-75 mode were used. As the result of correlation analysis between those modes, most of the correlation coefficients were higher than 0.90. On the basis of high correlation between those modes, correction factors by driving conditions were estimated. Through the results of this study, we obtained essential basic data to correct difference from those modes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1848-1856
• /
• 2012

This paper proposes a new grid-tied power conditioning system for battery energy storage, which is composed of a 2-stage DC-DC converter and a PWM inverter. The 2-stage DC-DC converter is composed of an LLC resonant converter connected in cascade with a 2-quadrant hybrid-switching chopper. The LLC resonant converter operates in constant duty ratio, while the 2-quadrant hybrid-switching chopper operates in variable duty ratio for voltage regulation. The operation of proposed system was verified through theoretical analysis and computer simulations. Based on computer simulations, a hardware prototype was built and tested to confirm the technical feasibility of proposed system. The proposed system could have relatively higher efficiency and smaller size than the existing system.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.36-42
• /
• 2007

Diesel PM can be controlled using Diesel Particulate Filter, which can effectively reduce the level of soot emissions to ambient background levels. In the Heavy Duty Diesel area, the Continuously Regeneration trap has been widely applied in the retrofit market. As the Special act for the improvement of air quality in the capital area, the retrofit program for DPF to used diesel vehicle has progressed favorably and there are currently over 1,000 of these DPF in use in retrofit applications in korea. These DPF comprise a specially formulated Diesel Oxidation Catalyst upstream of a DPF. The $NO_2$ generated by the DOC is used to combust the carbon collected in the DPF at low temperature. To certificate DPF device that is suitable to domestic circumstances, it is necessary to evaluate exactly the DPF devices according to the regulation of DPF certificate test procedure for retrofit(ministry of environment(MOE) announcement NO. 2005-16). To do so the understand of that regulation like the standard of PM reduction rate is needed. In this study the test procedure including test cycle and BPT test condition was examined and also the test result for specific DPF was analyzed. In every test like field test, PM reduction efficiency test and seoul-10 mode test, no defect could be showed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.392-393
• /
• 2007

In this paper, we report the characteristics inorganic EL device with high dielectric constant materials of PMN, PZT. Fabricated EL device shows stable light emission even at 20kHz -400Volt without any break down failure. Brightness voltage curve of EL device is same with typical EL. As increasing applied voltage, the brightness increased linearly. From the results of Frequency and duty ratio variation, over 50% of brightness increment was seen. Luminous efficiency was increased upto 200V range and saturated over 200V by slow increasement of light emission. We got e bright stable emission of 1733 cd/m2 at the condition of Frequency 35 KHz, Duty 10%, 400V.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3046-3060
• /
• 2012

Low power listening (LPL) MAC protocols based on duty-cycling mechanism have been studied extensively to achieve ultra low energy consumption in wireless sensor networks (WSNs). Especially, recent ACK-based LPL schemes such as X-MAC employ strobe preambles and an early ACK, and show fair performances in communications and energy efficiencies. However, the state-of-the-art ACK-based LPL scheme still suffers from collision problems due to the protocol incompleteness. These collision effects are not trivial and make WSNs unstable, aggravate energy consumptions. In this paper, we propose two novel schemes; (i) ${\tau}$-duration CCA to mitigate the collision problem in ACK-based LPL MAC protocols. (ii) Short Preamble Counter (SPC) to conserve more energy by reducing unnecessary overhearing. We demonstrate the performance improvement of our scheme via a mathematical analysis and real-time experiments. Both analysis and experimental results confirm that our proposed scheme saves energy by up to 36% compared to the naive ACK-based LPL MAC protocol thanks to ${\tau}$-duration CCA and SPC.

• The Journal of Korean Society for School & Community Health Education
• /
• v.15 no.3
• /
• pp.95-103
• /
• 2014

Objectives: To identify work stress and affecting factors of the emergency medical technicians(EMT) and to provide basic data for work circumstance improvement and emergency medical service and duty efficiency elevation. Methods: The data were collected by questionnaire from 635 emergency medical technicians throughout the whole country from August 5 to September 20 2013 and analyzed by using the SPSS(version 18.0) program. Factors affecting stress were analyzed by Multiple Linear Regression Analysis(${\alpha}=0.05$). Results: Mean level of job stress was markedly high in the spot situation(3.43 point), user awareness(3.31 point), burden related to work(3.21 point), role and conflict as a professional job(3.10 point), unsuitable treatment(2.95 point) but was lowest in specialty demand of knowledge and skill(2.76 point). Conclusions: To diminish work stress, understanding and cooperation of the residents and reduction of burden related to work must be improved. Above all, positive interest of 119 and related organ and duty environment improvement will and effort and continuous measure establishment and support and cooperation of the government are needed.