• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.317-319
• /
• 2019

In this paper, a three level duty cycle controlled half bridge LLC converter for EV charger application is presented. The topology and operating regions of the converter are discussed. The equations of the converter are derived in time domain. A small signal model of the converter is developed by perturbation and linearization of the steady state model about their operating point using Extended Describing function.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1402-1408
• /
• 2015

A MOSFET's gate driver based on magnetic coupling is investigated. The gate driver can meet the demands in applications for wide range of duty cycles and high frequency. Fully galvanic isolation can be realized, and no auxiliary supply is needed. The driver is insensitive to the leakage inductor of the isolated transformer. No gate resistor is needed to damp the oscillation, and thus the peak output current of the gate driver can be improved. Design of the driving transformer can also be made more flexible, which helps to improve the isolation voltage between the power stage and the control electronics, and aids to enhance the electromagnetic compatibility. The driver's operation principle is analyzed, and the design method for its key parameters is presented. The performance analysis is validated via experiment. The disadvantages of the traditional magnetic coupling and optical coupling have been conquered through the investigated circuit.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.486-488
• /
• 1996

A dc-dc converter which transfers l2-48W of power(regulated output voltage 24V) across a large, variable air gap(1-2cm) has been designed. This converter employs double resonance to compensate the large leakage inductance of the primary and secondary of the transcutaneous transformer. To maximize the effect of resonance, a constant frequency, duty cycle control method is used. The duty cycle control presents advantages over a frequency control in terms of increase in dc voltage gain and reduction of the primary current. The analysis and design procedure for the proposed scheme is presented and the performance result is simulated and verified experimentally.

• International Journal of Automotive Technology
• /
• v.7 no.6
• /
• pp.659-666
• /
• 2006

EGR(Exhaust Gas Recirculation) systems are extensively used to reduce NOx emissions in light duty diesel engine but its application to heavy duty diesel engines is yet to be widely implemented. In this study, the simulation model for a EURO 3 engine was developed using WAVE and then its performance and emission levels were verified with experimental results. The possibility of operating a EURO 3 engine with LPL EGR system to satisfy the EURO 4 regulation was investigated. Each component of the engine was modeled using CATIA and WaveMesher. The engine test mode was ESC 13, and the injection timing and fuel quantity were changed to compensate for the reduction of engine power caused by applying EGR. As a result of the simulation, it was found that EURO 4 NOx regulation could be satisfied by applying an LPL EGR system to the current EURO 3 engine.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.2
• /
• pp.139-144
• /
• 2013

Negative bias temperature instability (NBTI) has become a major factor determining circuit reliability. The effect of the NBTI on the circuit performance depends on the duty cycle which represents the stress and recovery conditions of each device in a circuit. In this paper, we propose an analytical model to perform more accurate duty cycle estimation at the gate-level. The proposed model allows accurate (average error rate: 3%) computation of the duty cycle without the need for expensive transistor-level simulations Furthermore, our model estimates the waveforms at each node, allowing various aging effects to be applied for a reliable gate-level circuit aging analysis framework.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.684-689
• /
• 2002

This paper represents the life-cycle cost(LCC) of steel bridges which are located on the train-network. Corrosion problems are mainly considered in the steel members such as steel plate girder, box girder, truss and arch. Based on the current value, initial construction cost, maintenance cost and demolition cost are calculated and life-cycle costs are formulated for the several types of bridges. From the comparison on each LCC, an effective painting method is recommended for reducing the LCC of steel bridges. Even though the initial cost of Super Weather Resistance Heavy Duty Paintings (Resin Fluoride) is expensive, because of the long endurance, the LCC of steel bridges painted with Super Weather Resistance Heavy Duty Paintings (Resin Fluoride) is less than that painted with General Heavy Duty (Rubber Chloride).

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.88-89
• /
• 2017

This paper investigates the design of multi-winding coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of multi-winding coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -(1/n-1), i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 1/n, 2/n, … or (n1)/n. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.294-295
• /
• 2017

태양광발전시스템은 설비 사용률을 최대화하기 위하여 PV 모듈을 최대 전력점에서 운전하는 MPPT(Maximum Power Point Tracking) 제어가 반드시 필요하다. 기존의 MPPT 알고리즘은 경사법에 기반을 두기 때문에 일정한 MPPT 주기마다 일정한 크기의 PWM Duty 비의 자극을 주고, 그에 따른 출력 전력의 변화를 감지하여 최대 전력점을 향한 다음 운전점을 찾는다. 이러한 MPPT 알고리즘을 실제 날씨 환경에 적용할 때 최대전력을 생산하기 위한 최적의 MPPT 주기와 PWM Duty 비의 변량은 다양한 일사량의 프로파일 형태에 따라 달라진다. 그러므로 최적의 MPPT 주기와 PWM Duty 비의 변량을 결정하기 위해서는 실제 날씨 환경에서 다양한 일사량 프로파일의 패턴에 대한 분석이 필수적이다. 본 논문에서는 대한민국 중부지역의 전형적인 맑은 날씨와 흐린 날씨에서 실제 일사량을 측정, 분석하여 MPPT 목표 효율을 최대화할 수 있는 MPPT 주기를 제시하였다.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.667-672
• /
• 2010

A way how to teach a general understanding of switched mode power supplies (SMPS) is shown. A fourth order PWM DC-to-DC converter with limited duty cycle range is treated as an example and a survey over important data (maximum voltage and current ratings for the elements, rms- values for the semiconductor devices and a rough approximation of the losses) of the circuit is given. Furthermore, a converter model based on duty ratio averaging is established. Continuous mode of operation is used. The results make it possible to estimate the applicability of the given converter structure and offer sufficient material for the calculation, design, and analysis and give a better insight into switched mode energy conversion.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.116-118
• /
• 2003

This paper describes a Accelerated Life Test (ALT) with the electrical contact erosion suitable to the evaluations of high-reliability and durability devices such as magnetic contactor. Recently, an electrical devices company was interested in accelerated life test (ALT), the product liability (PL) and the short-term testing model of electrical life test (ELT). In order to estimate a model for testing fee and period, need to the statistical analysis method with the acceleration factor(AF). Usually customer/manufacturer regard their device failure to the over-current or heavy duty condition, while devices view shape of contact erosion owing to operational duty problem. In this paper, additional method of evaluation estimated the operated cycles by weight of contact erosion with a used of regression analysis by MINITAB.