• 제목/요약/키워드: dual problems

검색결과 493건 처리시간 0.023초

한국의 초고령사회를 대비한 최소주거면적 기준의 인체측정학적 방법 연구 - Karl H. E. Kroemer의 인체측정학적 데이터 적용 방법 - (A Study on the Anthropometrical Method of Minimum Residential Space Standard for the Super-Aged Society of Korea - by Anthropometrical Data Application Methods of Karl H. E. Kroemer -)

  • 이호성
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제23권1호
    • /
    • pp.15-24
    • /
    • 2017
  • Purpose: Korea is expected to enter an aged society in 2018 and then a super-aged society in early 2025. The country's aging is progressing faster than any other country in the world. However, the foundation of the elderly friendly industry is weak, and measures at the government level are urgently needed. Especially, housing problems of the elderly are one of the most urgent measures to be taken. Korea does not have the minimum residential area standard for the elderly, and the current general minimum residential area standard is based on the survey of the housing situation without scientific evidence. Therefore, both standards need to be revised as soon as possible based on scientific evidence. Methods: The minimum residential area standard has been calculated following Karl H. E. Kroemer's Min or Max design also being called as-single cut and dual cut theory- as the maximum population value and minimum population value theory of Ernest J. McCormick. Therefore there is a need for a formula made using a few key factors, such as corresponding dimension, practical dimension, clearance, spare dimension, integrated dimension. These elements can be defined and used as formulas to calculate minimum residential area standards. Results: Assuming the results of the spatial variability in this study showed that it is possible to raise the standard of living in a terms of sustainable minimum size for the young, old and all residents. Implications: The government should set a minimum residential area standard with scientific grounds and set up a policy improving the life of people who live in an needy residential environment.

중앙버스전용차로 버스전용신호 도입시 신호 최적화에 관한 연구 (Development of Determining Technique of Optimum Signal Time of Intersections On Median Exclusive Bus Lane using Bus-only Signal)

  • 김보겸;김승일;김영찬;김진태
    • 대한교통학회지
    • /
    • 제24권5호
    • /
    • pp.123-133
    • /
    • 2006
  • 서울시를 포함한 수도권 각 도시는 중앙버스전용차로의 적극적인 도입으로 버스속도 및 정시성 향상을 통해 대중교통우선 처리 전략을 적극 추진 중에 있다. 그러나 이로 인해 중앙부 $1{\sim}2$개 차로를 버스전용차로가 차지함으로써 기존 신호운영체계에 큰 변화를 가져오게 되었다 좌회전 차량과 중앙버스전용차로를 이용해 직진하는 버스간에 새로운 상충이 발생하게 되어 동시신호 기법 등 교차로 신호운영대안이 줄어들게 된 것이다 이 해결방안으로서 버스전용신호를 도입하여 중첩현시 및 동시신호 등 Dual-Ring방식의 다양한 신호 운영을 가능케 하는 방안이 모색되고 있다. 본 연구에서는 이러한 버스전용신호 도입 시 교차로 정체를 최소화할 수 있는 신호설계방법을 제시하였고, 중앙버스전용차로가 운영 중인 양재역사거리에 동 기법을 이용한 최적신호 설계를 적용, 시뮬레이션을 통해 그 효과를 검증하였다.

A Translator of MUSS-80 for CYBER-72l

  • 이용태;이은구
    • 정보과학회지
    • /
    • 제1권1호
    • /
    • pp.23-35
    • /
    • 1983
  • In its global meaning language translation refers to the process whereby a program which is executable in one computer can be executed in another computer directly to obtain the same result. There are four different ways of approaching translation. The first way is translation by a Translator or a Compier, the second way is Interpretation, the third way is Simulation, the last way is Emulation. This paper introduces the M-C Translator which was designed as the first way of translation. The MUSS 80 language (the subsystem of the UNIVAC Solid State 80 S-4 assembly language system) was chosen as the source language which includes forty-three instructions, using the CYBER COMPASS as the object language. The M-C translator is a two pass translator and is a two pas translator and es written in Fortran Extended language. For this M-C Translation, seven COMPASS subroutines and a set of thirty-five macros were prepared. Each executable source instruction corresponds to a macro, so it will be a macro instruction within the object profram. Subroutines are used to retain and handle the source data representation the same way in the object program as in the source system, and are used to convert the decimal source data into the equivalent binary result into the equivalent USS-80digits before and after arithmetic operations. The source instructions can be classified into three categories. First, therd are some instructions which are meaningless in the object system and are therefore unnecessary to translate, and the remaining instructions should be translated. Second, There are some instructions are required to indicate dual address portions. Third, there are Three instructions which have overflow conditions, which are lacking in the remaining instructions. The construction and functions of the M-C Translator, are explained including some of the subroutines, and macros. The problems, difficulties and the method of solving them, and easier features on this translation are analysed. The study of how to save memory and time will be continued.

RFID를 활용한 차량관리 융합 인프라 구축방안 연구 (A Study of Improving Method for The Convergence Infra Build of Vehicle Management Using by RFID Technologies)

  • 이봉춘;하덕호;김기문
    • 한국정보통신학회논문지
    • /
    • 제12권9호
    • /
    • pp.1539-1546
    • /
    • 2008
  • 현대 사회에서 차량은 사람과 물류를 이동시키는 주요한 역할을 담당하고 경제활동에서 필수적인 매체로 사용되고 있으며 그 대수와 이용가치가 날로 증가하는 추세에 있다. 하지만 차량 이용자의 편의성과 관리체계는 기술발전에 비해 아주 미흡한 실정이다. 본 논문에서는 현재 세대 당 1대 정도로 보유하고 있는 차량 이용자가 경유하는 행정 프로세스의 여러 경로를 우선 탐색하고 분산되어 있는 정보이용 체계를 구체화 한다. 또한, RFID를 활용한 Ubiquitous 기술과 자가 광통신망을 활용하여 각종 차량등록정보시스템을 구축한다. 특히, 차량을 관리하는 각종 행정기관 등의 중간 이용과정에서 폐차까지의 활용주기 전체를 일원화하고 첨단방식으로 관리 할 수 있는 차량정보 공동관리 모델을 개발한다. 아울러 자동차와 관련되어 다양하게 출시되고 있는RFID 활용분야의 중복 투자 방지와 표준화 추진을 위한 차량문화 선진화 정책 방안을 제시한다.

라티노 미디어와 스페인어 텔레비전 방송 (Latino Media and Spanish Language Television Broadcasting)

  • 이성훈
    • 비교문화연구
    • /
    • 제23권
    • /
    • pp.243-264
    • /
    • 2011
  • The results of 2000 Population Census explains the context of a series of incidents happening in the Latino television broadcasting market recently. That is, the rapid growth of Latino population so fast as overtaking the Black population has needed media as a means of Latino's own social interests and communication. In this context, the television broadcasting market as a marketing means of capitals targeting for the Latinos has experienced more rapid changes. In other words, there has been some changes in the Latino television broadcasting market which divided by two major networks, Univision and Telemundo. It was 1970s when Latino media started to be considered as an important framework to understand the problems of the Latinos in American society. Experiencing the human rights movement of the 1960s, the Latino communities' sense of identity realized the importance of media as an expression of themselves from the interest on the factors which directly determine the quality of their life such as the immigration, education, health, and employment. The anglo media plays a role in introducing the Latinos and forming the images of the Latinos to the non-Latinos. It can be possible to criticize that the anglo media propagates the unilateral image of the Latinos by the mainstream white society, the stereotyped images of the Latinos. The spanish media targeting for the Latinos has grown continuously, combining the inside needs of forming the identity of the Latinos and communication and outside needs of commercialism. On the other hand, the needs for the programs based on the American Latinos has been increased, along with the increase of the Latino media based on the dual languages or English. This paper reviewed the history of the Latino media briefly, and then examined the relationship between the Latinos and the media through the television broadcasting which influence the Latino's everyday life enormously.

중국 BIT상 최혜국대우조항의 투자자-국가 간 분쟁해결절차에 적용에 관한 연구 (Study on the Applicability of Most-Favored-Nation clause in Investor-State Dispute Settlement under China's BIT)

  • 장만;하현수
    • 아태비즈니스연구
    • /
    • 제10권1호
    • /
    • pp.117-133
    • /
    • 2019
  • This paper examines the most-favored-nation treatment clause on the BITs concluded by China and examines the attitudes of China on the application of the most-favored-nation treatment clause to the ISDs by period as the scope of arbitration increases. Moreover, this study pointed out the problems that would be exposed if the most-favored-nation treatment clause applies to ISDs and then also suggested solutions. The conclusions of this study are as follows; if the Chinese government strictly restricts the applicable expansion of the most-favored-nation treatment clause to the dispute settlement procedure by considering only the position of the capital importing country, it implies a contradiction against the development trend of the arbitration system related to international investment disputes. Of course, in order to protect the rights of Chinese investors investing abroad, expanding the applicability of the most-favored-nation treatment clause to the ISDs procedure unconditionally may have a negative impact under China's dual status of being a capital-importing country and a capital-exporting country. Therefore, China should clearly define the scope of application of the most-favored-nation treatment clause, the completion of the local remedy for the host country in cases of BIT to be concluded in the future or amended, and also clearly define that the most-favored-nation treatment clause should not be retroactively applied into BITs already concluded as an exception of applicability of the most-favored-nation treatment.

Coupling non-matching finite element discretizations in small-deformation inelasticity: Numerical integration of interface variables

  • Amaireh, Layla K.;Haikal, Ghadir
    • Coupled systems mechanics
    • /
    • 제8권1호
    • /
    • pp.71-93
    • /
    • 2019
  • Finite element simulations of solid mechanics problems often involve the use of Non-Confirming Meshes (NCM) to increase accuracy in capturing nonlinear behavior, including damage and plasticity, in part of a solid domain without an undue increase in computational costs. In the presence of material nonlinearity and plasticity, higher-order variables are often needed to capture nonlinear behavior and material history on non-conforming interfaces. The most popular formulations for coupling non-conforming meshes are dual methods that involve the interpolation of a traction field on the interface. These methods are subject to the Ladyzhenskaya-Babuska-Brezzi (LBB) stability condition, and are therefore limited in their implementation with the higher-order elements needed to capture nonlinear material behavior. Alternatively, the enriched discontinuous Galerkin approach (EDGA) (Haikal and Hjelmstad 2010) is a primal method that provides higher order kinematic fields on the interface, and in which interface tractions are computed from local finite element estimates, therefore facilitating its implementation with nonlinear material models. The inclusion of higher-order interface variables, however, presents the issue of preserving material history at integration points when a increase in integration order is needed. In this study, the enriched discontinuous Galerkin approach (EDGA) is extended to the case of small-deformation plasticity. An interface-driven Gauss-Kronrod integration rule is proposed to enable adaptive enrichment on the interface while preserving history-dependent material data at existing integration points. The method is implemented using classical J2 plasticity theory as well as the pressure-dependent Drucker-Prager material model. We show that an efficient treatment of interface variables can improve algorithmic performance and provide a consistent approach for coupling non-conforming meshes in inelasticity.

일학습병행제 NCS기반자격과 과정평가형 국가기술자격 연계 과정 개발 연구: 기계설계기사 자격 사례 (A Study on Curricula Development to Accommodate Both Course-Based National Technique Qualification Program and NCS Based Certificate Program of Work and Study in Parallel: A Case on the Qualification of Mechanical Design Engineer)

  • 최환영
    • 실천공학교육논문지
    • /
    • 제11권1호
    • /
    • pp.51-59
    • /
    • 2019
  • 대학연계형 일학습병행제를 운영하는 계약학과 입장에서 NCS기반자격과 과정평가형 자격 모두를 수용할 수 있는 교과 편성이 가능한가에 대한 연구로 두 자격 간 주요내용과 차이점을 비교 분석한다. 기계설계 직무중에서 과정평가형 자격으로 공고된 기계설계기사 사례 분석을 통하여 양측 자격의 편성 기준에 부합하는 교과과정을 개발하였고 향후 운영상의 문제점을 예측하고 극복방안을 제시한다. 또한 일학습병행제와 과정평가형을 연계하여 운영하는 전문 교육기관으로 공급자 중심의 교육훈련과 수요자 중심 기술 자격의 격차를 최소화하고 학습근로자의 학업 성과를 극대화 하기 위한 현장주도 교육과정 편성이 용이하도록 몇가지 방안을 제안한다.

증강현실을 이용한 인지 판단 기술에 관한 연구 (A study on Cognitive Judgment Technology using Augmented Reality)

  • 이철승;김국세
    • 한국전자통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.1075-1080
    • /
    • 2020
  • 컴퓨팅 기술과 네트워킹의 발달은 4차 산업혁명의 근본이 되는 기술로 발달하고 있다. 이중 실감 미디어 분야인 AR과 VR 기술은 많은 응용영역으로 발달하고 있으며, 특히! 의료분야의 발전가능성은 매우 높다. 보건의료분야의 발전 가능성으로는 인구의 노령화에 따른 다양한 만성 질환의 증가와 이를 처리할 수 있는 기반시설의 제한, 전문 인력의 부족과 같은 문제점을 해결하기 위해, AR/VR과 같은 4차 산업혁명의 대표기술을 이용한 헬스케어 분야의 서비스를 채택하고 있다. 이에 따라, 헬스케어 분야의 AR/VR의 영역은 전체 산업 시장의 약 17%를 차지하고 있다. 이에 본 연구는 AR을 이용한 인지 판단 기술은 경도인지장애자 대상으로 컴퓨팅 시스템을 통한 인지 평가를 적용하고, 결과를 바탕으로 증강현실을 이용한 인지 재활 콘텐츠를 활용할 수 있도록 연구하고, 인지 판단 기술에 필요한 하드웨어와 소프트웨어 설계를 통해 AR을 이용한 인지 판단 기술과 헬스케어 분야에 도움을 주고자 한다.

Effect of Modified Casein to Whey Protein Ratio on Dispersion Stability, Protein Quality and Body Composition in Rats

  • Jeong, Eun Woo;Park, Gyu Ri;Kim, Jiyun;Yun, So-Yul;Imm, Jee-Young;Lee, Hyeon Gyu
    • 한국축산식품학회지
    • /
    • 제41권5호
    • /
    • pp.855-868
    • /
    • 2021
  • The present study was designed to investigate the effects of protein formula with different casein (C) to whey protein (W) ratios on dispersion stability, protein quality and body composition in rats. Modification of the casein to whey protein (CW) ratio affected the extent of protein aggregation, and heated CW-2:8 showed a significantly increased larger particle (>100 ㎛) size distribution. The largest protein aggregates were formed by whey protein self-aggregation. There were no significant differences in protein aggregation when the CW ratios changed from 10:0 to 5:5. Based on the protein quality assessment (CW-10:0, CW-8:2, CW-5:5, and CW-2:8) for four weeks, CW-10:0 showed a significantly higher feed intake (p<0.05), but the high proportion of whey protein in the diet (CW-5:5 and CW-2:8) increased the feed efficiency ratio, protein efficiency ratio, and net protein ratio compared to other groups. Similarly, CW-2:8 showed greater true digestibility compared to other groups. No significant differences in fat mass and lean mass analyzed by dual-energy x-ray absorptiometry were observed. A significant difference was found in the bone mineral density between the CW-10:0 and CW-2:8 groups (p<0.05), but no difference was observed among the other groups. Based on the results, CW-5:5 improved protein quality without causing protein instability problems in the dispersion.