• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.38-43
• /
• 2011

A CNG/diesel dual-fuel engine uses CNG as the main fuel and injects a small amount of diesel as an ignition priming. This study proposed the modification of the existing diesel engine into a dual-fuel engine that injects diesel with a high pressure by common rail direct injection (CRDI) and by injecting CNG at the intake port for premixing. And experiment was progressed for understanding about effect of CNG mixing ratio. The CNG/diesel dual-fuel engine showed equally satisfactory coordinate torque and power regardless of CNG mixing ratio. The PM emission was low at any CNG mixing ratio because of very small diesel pilot injection. In case of NOx and HC, high CNG mixing ratio showed low NOx and HC emissions at low speed. At medium & high speed, low CNG mixing ratio showed low NOx and HC emissions. Therefore, it would be optimized by controlling CNG mixing ratio.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.210-219
• /
• 2014

The MPI dual injection engine can enhance the fuel efficiency and engine power. By using one injector per one intake port, MPI dual injection engine has an excellent fuel atomization and targeting injection. As the basic research for the MPI Dual injection engine design, this research was investigated in order to understand the characteristic of the in-cylinder flow and fuel behavior according to engine temperature condition and the fuel type in the MPI dual injection engines. The 3D unsteady CFD simulation for the MPI Dual injection engine was performed using STAR-CD. The engine operating condition was 2,000 rpm/WOT. The parameters for this study were fuel types, fuel temperatures and wall temperatures. As a result, the intake air amount, evaporated fuel in the cylinder and the fuel film on the wall were presented according to parameters that depend on the fuel properties and engine wall temperature. Also, the results were influenced by in-cylinder flow such as the intake flow, back flow and so on.

• Management Science and Financial Engineering
• /
• v.5 no.1
• /
• pp.1-25
• /
• 1999

There is a worldwide trend to automate the handling operations in port container terminals in an effort to improve productivity and reduce labor cost. This study iscusses how to apply an AGV(automated guided vehicle) system to the handling of containers in the yard of a port container ter-minal. The main issue of this paper is how to assign tasks of container delivery to AGVs during ship operations in an automated port container terminal. A dual-cycle operation is assumed in which the loading and the discharging operation can be performed alternately. Mixed integer linear program-ming formulations are suggested for the dispatching problem. The completion time of all the dis-charging and loading operations by a quayside crane is minimized, and the minimization of the total travel time of AGVs is also considered as a secondary objective. A heuristic method using useful properties of the dispatching problem is suggested to reduce the computational time. The perfor-mance of the heuristic algorithm is evaluated in light of solution quality and computation time.

• Convergence Security Journal
• /
• v.8 no.2
• /
• pp.71-78
• /
• 2008

This research is on the study of integrating internet and intranet that was built for their own enterprise into one network system that promises a more economic and secure use. Compared to this system, the traditional network conversion device not only has its mechanical limits, but also requires a separate network set up. This raises both interoperability and security problems and results in a higher cost. Therefore, I propose dual defence system based on the inverse multiplexing of ATM Forum and IPSec to improve network ability and deliver enhanced system reliability while reducing cost. Furthermore, I also addressed some of the weaknesses of the Scanning Attacking Method, SNMP and Spooler Port and proposed counter measures that will deal with these weakness at the dual defence system.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.547-553
• /
• 2005

The purpose of this paper is to evaluate the quay crane productivity in automated container terminal with perpendicular yard layout. In particular, four quay crane (single trolley/dual trolley/double trolley/supertainer) are considered to evaluate the productivity on the terminal performance. Each quay crane load or unload containers by a different process. For each quay crane, two productivities are considered and compared: mechanical productivity, net productivity. As the net productivity of quay crane is significant, in this paper, an application of simulation model to simulate automated container terminal is developed and a wide variety of computational experiments were conducted.

• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.697-704
• /
• 2007

Recently, a variable valve timing system has been widely adopted in internal combustion engine in order to improve the fuel economy and torque at low engine speed. In addition, it is known that varying valve timing according to the various engine operations could reduce exhaust gas, especially NOx, because of residual gas by valve overlap. In this study, to improve the low exhaust gas and fuel economy at part load condition, the residual gas and back flow of exhaust gas due to valve overlap were calculated computationally. Moreover, the characteristics of engine performances and NOx formations were investigated with the experiment of combination of intake and exhaust valve timing condition. Under these various valve operating conditions, the effects of both the positive valve overlap and negative valve overlap(valve underlap) were examined simultaneously. Finally, the characteristics of cyclic THC emission were analyzed by using Fast Response FID(FR-FID) in the cylinder, intake port and exhaust port positions. Besides, the effect of the different gradients of the valve timing change on engine performance was investigated and an optimum control strategy was suggested.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.598-601
• /
• 2006

The radio signal in GNSS was intentionally designed with two frequencies in order to combat the dispersion error caused by trans-ionospheric propagation. By measuring the path delay independently at the two, widely spaced GPS frequencies, L1 & L2, the TEC along the path from satellite to receiver can be measured directly. The issue with dual frequency measurement of the ionosphere is the calibration of L1/L2 interfrequency biases. L1/L2 interfrequency biases are generated because physical electric signal paths of L1 and L2 circuits are different from each other for both satellites and receiver. Conventionally L1/L2 interfrequency bias is estimated and broadcasted by 2D ionospheric model. In this paper, we estimated IFB (interfrequency bias) by 2D & 3D ionospheric models including real time filter methods and compared the result of those and concluded the merit of 3D tomography model to recover the problem of 2D thin shell model. We confirmed our conclusion by experimental data.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.725-730
• /
• 1987

An experimental study of the air flow through inlet pipe of reciprocating two-cycle engine was investigated under motored condition. Measurements of the two components of velocity, velocity fluctuation, and the other behavior of inlet flow have been obtained by laser Doppler anemometer system. The research engine comprised the cylinder head of a two-cycle engine which mounted on optical spacer with measuring window and glass inlet entry for laser anemometer measurement. A dual beam laser Doppler anemometer was used with conventional forward scattered method and comprised argon-ion laser, frequency shifter with Bragg cell module, and the signal processor. Measurements of mean velocity fluctuation of inlet flow for different engine speeds, measuring positions, and the changes in cylinder volume are investigated. The results presented show that the changes in engine speed is shown to be strongly influenced on the mean velocity of inlet air. The effect of measuring position and cylinder volume on the inlet velocity was also investigated for the inlet port entry and is shown to be small compared to the engine speed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.181-182
• /
• 2009

In the machinery, the brake system is as important part as machine's working. If the machine doesn't stopped, would be big occident. For the ships, it is important too. Use the windlass winch to stop the voyage and use mooring winch to keep the stop in the port. In this study, improve the braking power divided the brake band and search the optimize portion.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.1
• /
• pp.106-113
• /
• 2009

This paper presents a surface acoustic wave(SAW) micro-electro-mechanical-systems(MEMS) interdigital transducer (IDT) gyroscope with 80MHz central frequency on a $128^{\circ}\;YX\;LiNbO_3$, which is consisted of a two-port SAW resonator, metallic dots and dual delay lines for the sensor and reference oscillators. Reason for using two delay line oscillators is to extract the gyroscope effect by comparing the resonant frequencies between two oscillators and to compensate the temperature effect. Based on the coupling of modes(COM) simulation, an 80MHz two ports SAW resonator and dual delay line were fabricated and characterized by the network analyzer. Obtained sensitivity was $109Hz/deg{\cdot}s^{-1}$ in the angular rate range of $0{\sim}1000deg/s$. Good Linearity and superior directivity were observed.