• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1080-1086
• /
• 2005

We have studied the Ge redistribution after dry oxidation and the oxide growth rate of $Si_{1-x}Ge_x$ epitaxial layer. Oxidation were performed at 700, 800, 900, and $1,000\;^{\circ}C$. After the oxidation, the results of RBS (Rutherford Back Scattering) & AES(Auger Electron Spectroscopy) showed that Ge was completely rejected out of the oxide and pile up at $Si_{1-x}Ge_x$ interface. It is shown that the presence of Ge at the $Si_{1-x}Ge_x$ interface changes the dry oxidation rate. The dry oxidation rate was equal to that of pure Si regardless of Ge mole fraction at 700 and 800$^{\circ}C$, while it was decreased at both 900 and $1,000^{\circ}C$ as the Ge mole fraction was increased. The dry of idation rates were reduced for heavy Ge concentration, and large oxiidation time. In the parabolic growth region of $Si_{1-x}Ge_x$ oxidation, the parabolic rate constant are decreased due to the presence of Ge-rich layer. After the longer oxidation at the $1,000^{\circ}C$, AES showed that Ge peak distribution at the $Si_{1-x}Ge_x$ interface reduced by interdiffusion of silicon and germanium.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.183-188
• /
• 2003

Corrosion of carbon and weathering steels were evaluated under 3 environmental exposures in Thailand (urban, rural and marine) for a year. The seasonal study was designed to determine different corrosion mechanisms by 6 months of dry season and 6 months of rainy season in a year. The sheltered exposure racks were used to determine the washing effect of min. At each site, climatic and pollutants analyses were carried out. The present study showed that the difference in corrosion rates of carbon and weathering steels was not so distinguished in both rural (AIT) and urban (TISTR) environments. The corrosion rate of weathering steel was somewhat lower than that of carbon steel and the decreasing tendency of corrosion rate with time was slightly higher for weathering steel than for carbon steel. In marine (Rayong) environment, the corrosion rate was higher and the effect of wet and dry seasons was observed. The corrosion rate in 6 dry months was higher for direct exposure than for sheltered exposure. However, in 6 rainy months. the corrosion rate of sheltered exposure was higher than that of direct exposure. In direct exposure for I year, that is, the first 6 dry months and the next 6 rainy months, the corrosion rate decreased with time. but in sheltered exposure, the corrosion rate did not decrease with time. instead, increased in the next 6 rainy months. This indicated that the protect ive layer formed in the first 6 dry months could be destroyed by high deposition of chloride to r sheltered exposure in the next 6 rainy months; whereas the rust layer for direct exposure could be kept sound due to washing effect in rainy season, even though the deposition rate of chloride was almost the same for direct and sheltered exposures. In marine environment, the weathering steel showed higher corrosion resistance than carbon steel but its corrosion rate was higher than those in other environments.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.34-40
• /
• 2013

The 1st assessment(performance test) was applied to assure the floor impact sound performance for developing the dry double-floor with the change of rubber hardness of the upper panel's support and the ceiling structure of the sub-floor. Depends on the change of the rubber hardness in sub-structure, the heavy-weight sound impact value is improved up to 3 dB, and the light-weight sound impact value is moved up to 21 dB, comparing with the bare-slab. Also, the improved value for the floor impact sound conjugating with the sub-floor's ceiling was 5 dB. Based on this result, the 2nd assessment(performance test) was made the state that the rubber hardness of the sub-floor support was ranged between 50 and 70 for considering the stability of walking patients. In addition to this process, the assessment was carried out with a variety of ceiling structure applied to the dry double-floor structure with the air flow system on the sub-floor's ceiling. The result for the 2nd assessment proved that TYPEII-3 had the better sound reduction performance in the heavy-weight impact sound test than other types, and also for the light-weight impact sound TYPEII-3 had the 29 dB sound reduction performance overall. Henceforth, based on the result the research for the sound reduction performance from the floor impact sound shall be ongoing process as well as the development of a double-dry floor and a sound reduction ceiling to suitable on the field.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.889-896
• /
• 2007

From the direct outflow of Chungju Dam to the junction of water body and watershed in Paldang lake is the scope of this research. This study performed to investigate the main cause of water quality deterioration and the influenced region in the middle field range of the Namhan river Basin with the onsite measurement of water quality and flow rate simultaneously during spring dry season. The purpose of this study is to find out the time-spatial variation characteristics of water quality and flow rate. Following the flow direction $BOD_5$ and $COD_{Mn}$ concentration increased to the highest value of 3.7 mg/L, 5.9 mg/L at Wolgesa respectively. Chl.a concentration increased to $50mg/m^3$ or so at Kangsang, after that it decreased to $37mg/m^3$ at the junction of Paldang lake. Organic matter concentration variation trend showed similar than that of Chl.a. Also $BOD_5$ concentration tendency was similar to Chl.a in every measuring sites except Paldang lake mixing zone. The major factors of water quality deterioration in Namhan river and Paldang lake during dry season were algal bloom and followed internal production. High phosphorus load from Dalcheon and Seom river caused dry season algal bloom and internal production in transitional zone which was stagnant area in downstream of Namhan river.

• 한국초지조사료학회지
• /
• 제17권1호
• /
• pp.82-88
• /
• 1997

A study was carried out to evaluate the values of roughages available in Korea on feed intake and digestibility of Korean native goats and consequently to apply its results to the feeding system of Korean goats as a basic information. The results are as follows. 1. The protein contents in Alfalfa and Acacia leaf were 17.6 and 16.3% respectively 11.7 and 6.8% higher than orchardgrass and pine needle. Ether extract tom pine needle was about two times higher than other roughage sources which are 9.2%. 2. Dry matter intake per day in goats fed alfalfa, acacia leaf and orchardgrass was higher (P < 0.05) at 590.3, 543.8 and 496.58 respectively and 217.lg in pine needle. 3. Dry matter intake per basal weight (DM glkg of B$W^{0.75}$ and DM g/kg of BW%) was higher in goats fed acacia leaf at 68.5 and 3.5% respectively than any other treatments goats fed pine needle showed the lowest (P< 0.05) dry matter intake at 28.6 and 1.5% respectively. 4. Dry matter digestibility was highest (PcO.05) in alfalfa fed goats at 61.4%. Dry matter digestibilities in orchardgrass, pine needle and acacia leaf were 58.0, 46.8 and 46.6% respectively. 5. Total digestible nutrients were highest (P< 0.05) in Alfalfa fed goats at 59.5%. Total digestible nutrients in orchardgrass, pine needle and acacia leaf were 54.2, 50.7 and 47.7% respectively. 6. In conclusion, the value of orchardgrass as feed for goats was as excellent as alfalfa and although acacia leaf had a less value than alfalfa in goats, it is considered to be used as a protein supplement in diets for goats due to its high content of protein and excellent palatability. Intake of pine needle in Korean goats in this study was satisfactory and it indicates the possibility of its use as a supplement in diets for goats. However, fkther investigation will be necessary particularly on the deleterious effects of ether extracts of pine needle

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.280-285
• /
• 2012

The 1st assessment (performance test) was applied to assure the floor impact sound performance for developing the dry double- floor with the change of rubber hardness of the upper panel's support and the ceiling structure of the sub-floor. Depends on the change of the rubber hardness in substructure, the heavy-weight sound impact value is improved up to 3 dB, and the light-weight sound impact value is moved up to 21 dB, comparing with the bare-slab. Also, the improved value for the floor impact sound conjugating with the sub-floor's ceiling was 5dB. Based on this result, the 2nd assessment (performance test) was made the state that the rubber hardness of the sub-floor support was ranged between 50 and 70 for considering the stability of walking patients. In addition to this process, the assessment was carried out with a variety of ceiling structure applied to the dry doublefloor structure with the air flow system on the sub-floor's ceiling. The result for the 2nd assessment proved that TYPE-11 had the better sound reduction performance in the heavy-weight impact sound test than other types, and also for the light-weight impact sound TYPE-11 had the 29 dB sound reduction performance overall. Henceforth, based on the result the research for the sound reduction performance from the floor impact sound shall be ongoing process as well as the development of a double-dry floor and a sound reduction ceiling to suitable on the field.

• 한국초지조사료학회지
• /
• 제13권3호
• /
• pp.195-202
• /
• 1993

This experiment was carried out to investigate the eft'ects of different seeding dates on the agronomic characteristics, forage yield and quality of fall sown cats(Avena sativa L.). The experiment was conducted at the forage experimental field, Seoul National University. Suweon in 1990. The results obtained are summarized as follows; 1. Present data indicated that plant and ear heights were decreased as the seeding date was delayed. Dry matter accumulation was increased due to the higher plant and ear heights. 1. When oats was seeded on August 20. the first heading and 50% heading dates were recorded on October 4 and 15, respectively. And when oats was seeded on August 25. the first heading and 5 0'!4 heading dates were observed on October 13 and 18. respectively. As seeding date was delayed for one day. the heading date was delayed for two days. 3. The dry mattcr percentage of oats seeded on August 20 was 20.1%, but that of oats seeded after August 10 was 15.1 to 16.7%. 4. According to the contents of CP. ADF and NDF, oats seeded on August 20 and 25 was evaluated to be the 3rd or 4th grade hay. and the other oats sceded after August 15 was recorded the 2nd or 3rd grade hay as proposed by AFGC. 5. There are no significant dry matter yield differences among the seeding dates of oats such as August 20, 25 and 30. but a significant yield difference was recorded between oats seeded in August and September. The same trend as the dry matter yield was observed in in vitro digestible dry matter and crude protein yields of oats seeded in August and September. According to the results. early seeding of early matuaring oats may be a better option than late seeding after August 30 for silage or hay production following silage corn harvest in the middle northern area of Korea.

• 한국건축시공학회지
• /
• 제13권2호
• /
• pp.131-138
• /
• 2013

본 연구는 최근 제주도 지역에서 현무암 가공과정에서 발생되는 폐기물인 석분슬러지를 재활용하기 위한 방안으로써 일반 시멘트몰탈에 사용되는 잔골재 대신에 현무암 석분슬러지의적용가능성에 대해 실험하였다. 드라이 몰탈의 재료로서의 기초적인 성능을 평가하기 위해 압축강도와 휨강도를 평가하고, SEM을 통해 미세구조를 관찰하였다. 현무암 슬러지 대체율 21%까지는 압축 및 휨강도는 증가하였으며, 보통 드라이몰탈보다 약 40% 강도 증진 효과가 있다. 현무암 슬러지의 대체율 약 20%이상에서는 상대적으로 수화생성물이 적게 생성되었다. 본 연구를 통해 현무암 슬러지 폐기물의 활용성을 확인할 수 있었으며, 콘크리트 2차 제품의 성형에도 가능할 것으로 판단된다.

• 드라이브 ㆍ 컨트롤
• /
• 제12권1호
• /
• pp.1-8
• /
• 2015

The stability of friction characteristics and thermal management for a dry type dual clutch transmission (DCT) are inferior to those of a wet clutch. Too high temperature resulting from frequent engagement of DCT speeds up degradation or serious wear of the pressure plate or burning of the clutch disk lining. Even though it is significantly important to estimate the temperature of a dry double clutch (DDC) in real-time, few meaningful study of the thermal model of DDC has been known yet. This study presented a thermal analytical model of lumped parameters for a DDC by analyzing its each component firstly. Then a series of experimental test was carried out on the test bench with a patented temperature telemetry system to validate the proposed thermal model. The thermal model, whose optimal parameter values were found by optimization algorithm, was also simulated on the experimental test conditions. The simulation results of DDC temperature show consistency with the experiment, which validates the proposed thermal model of DDC.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.463-471
• /
• 2009

Cemented soils or concrete are usually cured under moisture conditions and their strength increases with curing time. An insufficient supply of water to cemented soils can contribute to hydration process during curing, which results in the variation of bonding strength of cemented soils. In this study, by the consideration of in situ water supply conditions, cemented sand with cement ratio less than 20% was prepared by air dry, wrapped, and underwater conditions. A series of unconfined compression tests were carried out to evaluate the effect of curing conditions on the strength of cemented soils. The strength of air dry curing specimen was higher than those of wrapped cured specimen when cement ratio was less than 10%, whereas it was lower when cement ratio was greater than 10%. Regardless of cement ratio, air dry cured specimens were stronger than underwater cured specimens. A strength increase ratio with cement ratio was calculated based on the strength of 4% cemented specimen. The strength increase ratio of air dry cured specimen was lowest and that of wrapped and underwater cured ones increased by square. Strength of air dry cured specimen dropped to maximum 30% after wetting when cement ratio was low. However, regardless of cement ratio, strength of wrapped specimens dropped to an average 10% after wetting.