Influence of different curing methods on the compressive strength of cemented sand

양생방법이 고결모래의 압축강도에 미치는 영향

  • Park, Sung-Sik (Division of Civil, Environmental & Urban Engrg., Wonkwang Univ.) ;
  • Kim, Ki-Young (KIWE, Korea Water Resources Corporation) ;
  • Choi, Hyun-Seok (Division of Civil, Environmental & Urban Engrg., Wonkwang Univ.) ;
  • Kim, Chang-Woo (Division of Civil, Environmental & Urban Engrg., Wonkwang Univ.)
  • 박성식 (원광대학교 공과대학 토목환경.도시공학부) ;
  • 김기영 (한국수자원공사 K-water 연구원 수자원연구소) ;
  • 최현석 (원광대학교 공과대학 토목환경.도시공학부) ;
  • 김창우 (원광대학교 공과대학 토목환경.도시공학부)
  • Published : 2009.09.25

Abstract

Cemented soils or concrete are usually cured under moisture conditions and their strength increases with curing time. An insufficient supply of water to cemented soils can contribute to hydration process during curing, which results in the variation of bonding strength of cemented soils. In this study, by the consideration of in situ water supply conditions, cemented sand with cement ratio less than 20% was prepared by air dry, wrapped, and underwater conditions. A series of unconfined compression tests were carried out to evaluate the effect of curing conditions on the strength of cemented soils. The strength of air dry curing specimen was higher than those of wrapped cured specimen when cement ratio was less than 10%, whereas it was lower when cement ratio was greater than 10%. Regardless of cement ratio, air dry cured specimens were stronger than underwater cured specimens. A strength increase ratio with cement ratio was calculated based on the strength of 4% cemented specimen. The strength increase ratio of air dry cured specimen was lowest and that of wrapped and underwater cured ones increased by square. Strength of air dry cured specimen dropped to maximum 30% after wetting when cement ratio was low. However, regardless of cement ratio, strength of wrapped specimens dropped to an average 10% after wetting.

Keywords